Samsung Ht D555k User Manual

							10 EnglishEnglish 11
01 Getting Started
Description
Front Panel
1DISC TRAYInsert disc here.
2DISPLAYDisplays the playing status, time, etc.
3REMOTE CONTROL SENSORDetects signals from the remote control.
4OPEN / CLOSE BUTTON (  )Opens and closes the disc tray.
5FUNCTION BUTTON (  )The mode switches as follows : DVD/CD ➞ D.IN  ➞ AUX 1  ➞AUX 2  ➞ USB  ➞ FM
6STOP BUTTON (  )Stops disc playback.
7PLAY / PAUSE BUTTON (  )Plays a disc or pauses playback.
8VOLUME CONTROL BUTTON ( ,  )Volume adjustment.
9POWER BUTTON (  )Turns the product on and off. 
10USB PORTConnect here and play fi les from external USB storage devices such as MP3 
players, USB fl ash memory, etc.
11ASC IN / AUX IN 1 CONNECTOR Connect external components such as an MP3 player.
Connect to use the ASC (Auto Sound Calibration) function.
12MIC JACKSConnects to the microphone.
ASC IN/
AUX IN 1MIC 2MIC 1
ASC IN/
AUX IN 1MIC 2MIC 1
124
1110
395687
12
 
						

							1 English
Getting Started
English 1
1COOLING FANThe fan always revolves when the power is on. Ensure a minimum of 10cm 
of clear space on all sides of the fan when installing the product.
2SPEAKERS OUTPUT CONNECTORSConnect the front, Center, surround speakers and subwoofer. (HT-D550WK/D553WK/D555WK does not have rear speaker connectors on 
the product, the rear speakers are connected to the Wireless Receiver module.)
3EXTERNAL DIGITAL OPTICAL IN JACK
(DIGITAL AUDIO IN)Use this to connect external equipment capable of digital output.
4TX CARD CONNECTION (WIRELESS) The TX card enables communication between the product and the wireless 
receiver module. 
(The wireless receiver module is not provided for HT-D550K/D553K/D555K)
5HDMI OUT JACKUsing an HDMI cable, connect this HDMI output jack to the HDMI input jack 
on your TV for the best quality picture.
6AUX IN 2 JACKSConnect to the 2CH Analog output of an external device (such as a VCR).
7VIDEO OUT JACKConnect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack.
8COMPONENT VIDEO OUTPUT JACKSConnect a TV with Component video inputs to these jacks.
9FA NET (Only for Service)Used for the service repair.
10FM ANTENNA  JACKConnect the FM antenna.
Rear Panel
FM ANT
FA NET(Only For Service)DIGITAL
AUDIO IN WIRELESS
OPTICAL
SURROUND SUBWOOFER SURROUND
HDMI OUT
SPEAKERS OUT
AUX IN 2 COMPONENT
OUT
VIDEOOUT
12346109875
 
						

							1 EnglishEnglish 1
01 Getting Started
FUNCTION
TV SOURCEPOWER
DISC MENU MENU TITLE MENU
MUTE MIC VOL+
MIC VOL-
REPEAT
VOLTUNING
/CH
TOOLS
RETURN EXIT
INFO
A B C D
DSP /EQ
1 2 3
4 5 67 8
09
RECEIVER
SLEEP
DVDECHO
TV
P.BASSGIGA
DIMMER S.VOLAUDIO
UPSCALE
S/W LEVEL MO/ST USB REC
TUNER 
MEMORY
FUNCTION
TV SOURCEPOWER
DISC MENU MENU TITLE MENU
MUTE
REPEAT
VOLTUNING /CH
TOOLS
RETURN EXIT
INFO
A B C D
DSP /EQ
1 2 3
4 5 67 8
09
RECEIVER
SLEEP
DVD TV
P.BASSGIGA
DIMMER S.VOLAUDIO
UPSCALE
S/W LEVEL MO/ST USB REC
TUNER 
MEMORY
ECHO
MIC VOL+
MIC VOL-
Remote control
Tour of the Remote Control
To open and close the disc tray.
Turn the product on and off.
If you want to change to Home 
Cinema, press the DVD button.
Press numeric buttons to operate options.
This is mode selection button.
or  
Press to select TV's video mode.
Select MONO or STEREO for radio 
broadcasting.
Press to skip backwards or forwards.Press to search backwards or 
forwards.
Press to pause a disc.
Adjust the volume.
Search for active FM stations and 
change channels.
or
Adjust the microphone's volume.
Cut off the sound temporarily.
Allows you to repeat a title, 
chapter, track or disc.
Press to check the disc menu.
Press this to move to the home menu.
Select on-screen menu items and 
change menu value.
Return to the previous menu.
Select the desired DSP/EQ audio 
mode.
Press this to exit the menu.
Display current disc(file) status.
Allow access to common functions
of the product such as the Photo List.
Use this to enter the Title menu.
Select the desired Dolby Pro Logic II audio  mode.
Used to change the audio/subtitle 
language, angle etc.
Adjust the brightness of Display.
Press to preset FM stations.
If you want to change to TV mode,  press the TV button.
Press to stop/play a disc.
Regulate and stabilize the volume level 
against a drastic volume change.
Select the desired P.BASS or 
MP3 Enhancement setting.
Used to adjust the level of the  subwoofer.Used to start USB recording.
Used to turn on/off GIGA Sound function.
Set a Sleep time to shut off the 
product.
or
Adjust the echo level of the 
microphone.
 
						

							1 English
Getting Started
English 1
Installing batteries in the Remote 
Control
NOTE
Place batteries in the remote control so they match 
the polarity : (+) to (+) and (–) to (–).
Always replace both batteries at the same time.
Do not expose the batteries to heat or flame.
The remote control can be used up to approximately 
7 meters in a straight line.
Setting the Remote Control
You can control certain functions of your TV with this 
remote control.
When operating a TV with the remote controlPress the  
TV button to set the remote control to 
TV mode.  
Press the  POWER button to turn on the TV.
While holding down the  POWER button, enter 
the code corresponding to your brand of TV.
If there is more than one code listed for your 
TV in the table, enter one at a time to 
determine which code works.
Example : For a Samsung TV 
While holding down the  POWER button, use the 
number buttons to enter 00, 15, 16, 17 and 40.
If the TV turns off, the setting is complete.
You can use the TV POWER, VOLUME, 
CHANNEL, and Numeric buttons (0~9).
NOTE
The remote control may not work or some operations 
may not be possible with some brands of TVs.
The remote control will work on a Samsung TV by 
default. 
✎
`
`
`
`
1.
2.
3.
~
~
4. ~
✎
`
`
TV Brand Code List
Brand Code Brand CodeAdmiral 
(M.Wards) 56, 57, 58
MTC
18
A Mark 01, 15 NEC
18, 19, 20, 40, 59, 60
Anam 01, 02, 03, 04, 05, 06, 
07, 08, 09, 10, 11,  12, 13, 14 Nikei
03
AOC 01, 18, 40, 48 Onking
03
Bell & Howell 
(M.Wards)57, 58, 81 Onwa
03
Brocsonic 59, 60Panasonic06, 07, 08, 09, 54, 66, 
67, 73, 74
Candle 18Penney
18
Cetronic 03Philco03, 15, 17, 18, 48, 54, 
59, 62, 69, 90
Citizen 03, 18, 25 Philips15, 17, 18, 40, 48, 
54, 62, 72
Cinema 97Pioneer
63, 66, 80, 91
Classic 03Portland
15, 18, 59
Concerto 18Proton
40
Contec 46Quasar
06, 66, 67
Coronado 15Radio Shack
17, 48, 56, 60, 61, 75
Craig 03, 05, 61, 82, 83, 84 RCA/
Proscan
18, 59, 67, 76, 77, 78,  92, 93, 94
Croslex 62Realistic
03, 19
Crown 03Sampo
40
Curtis Mates 59, 61, 63Samsung
00, 15, 16, 17, 40, 43, 46, 
47, 48, 49,
CXC 03Sanyo
19, 61, 65
Daewoo02, 03, 04, 15, 16, 17, 18, 
19, 20, 21, 22, 23, 24,  25,  26, 27, 28, 29, 30, 32, 34,  35, 36, 48, 59, 90Scott 03, 40, 60, 61
Daytron 40Sears
15, 18, 19
Dynasty 03Sharp
15, 57, 64
Emerson 03, 15, 40, 46, 59, 61, 
64, 82, 83, 84, 85 Signature 
2000 
(M.Wards) 57, 58
Fisher 19, 65 Sony
50, 51, 52, 53, 55
Funai 03Soundesign
03, 40
Futuretech 03Spectricon
01
General 
Electric (GE)06, 40, 56, 59, 66,  67, 68 SSS
18
Hall Mark 40Sylvania18, 40, 48, 54, 59, 
60, 62
Hitachi 15, 18, 50, 59, 69 Symphonic
61, 95, 96
Inkel 45Tatung
06
JC Penny 56, 59, 67, 86 Techwood
18
JVC 70Teknika
03, 15, 18, 25
KTV 59, 61, 87, 88 TMK
18, 40
KEC 03, 15, 40 Toshiba
19, 57, 63, 71
KMC 15Vidtech
18
LG (Goldstar) 01, 15, 16, 17, 37, 38, 
39, 40, 41, 42, 43, 44 Videch
59, 60, 69
Luxman 18Wards15, 17, 18, 40, 48, 
54, 60, 64
LXI (Sears) 19, 54, 56, 59, 60, 62, 
63, 65, 71 Yamaha
18
Magnavox 15, 17, 18, 48, 54, 59, 
60, 62, 72, 89 York
40
Marantz 40, 54Yupiteru
03
Matsui 54Zenith
58, 79
MGA 18, 40 Zonda
01
Mitsubishi/ MGA 18, 40, 59, 60, 75
Dongyang
03, 54
* Battery size: AAA
 
						

							1 EnglishEnglish 1
02 Connections
This section involves various methods of connecting the product to other external components. 
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Front Speakers ei
Place these speakers in front of your listening position, facing inwards (about 45°) 
toward you. Place the speakers so that their tweeters will be at the same height 
as your ear. Align the front face of the front speakers with the front face of the 
Center speaker or place them slightly in front of the Center speakers.
Center Speaker fIt is best to install it at the same height as the front speakers. You can also install it 
directly over or under the TV.
Surround Speakers
hj
Place these speakers to the side of your listening position. If there isn't enough 
room, place these speakers so they face each other. Place them about 60 to 
90cm above your ear, facing slightly downward.
*    Unlike the front and Center speakers, the surround speakers are used to 
handle mainly sound effects and sound will not come from them all the time.
Subwoofer 
gThe position of the subwoofer is not so critical. Place it anywhere you like.
Position of the product
Place it on a stand or cabinet shelf, or under the 
TV stand.
Selecting the Listening PositionThe listening position should be located about 2.5 
to 3 times the distance of the TV's screen size 
away from the TV. 
 Example :    For 32" TV's 2~2.4m   
For 
55" TV's 3.5~4m   
SW
CAUTION
Do not let children play with or near the speakers. They could get hurt if the speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+ /–) is correct.
   Keep the subwoofer out of the reach of children so as to prevent them from inserting their hands or alien 
substances into the duct (hole) of the subwoofer.
   Do not hang the subwoofer on the wall through the duct (hole).
NOTE
If you place a speaker near your TV set, screen Color may be distorted because of the magnetic field 
generated by the speaker. If this occurs, place the speaker away from your TV set.
!
`
`
`
`
✎
`
Connections
 
						

							1 English
Connections
English 1
SURROUNDCENTER
SUBWOOFER
HT-D550K
NOTE
Refer to page 18 to install the Speakers on the Tallboy Stand.
✎
`
Speaker Components
Speaker Components
FRONT
(L) (R)
SURROUND
(L) (R)CENTER
STAND
STANDBASE SUBWOOFER
SPEAKER
CABLE
HT-D553K
SCREW (5×15): 2EA
SCREW (4×20): 8EA
FRONT
(L) (R)
STAND
STANDBASE
SPEAKERCABLE
SURROUND
(L) (R)
SCREW (5×15): 4EA
SCREW (4×20): 16EA
Assembled Speakers


HT-D553K
HT-D555KHT-D555K
Center SPEAKER
SURROUND  SPEAKER SUBWOOFER 
FRONT 
SPEAKER
FRONT/SURROUND  SPEAKERS Center SPEAKER
SUBWOOFER 
CENTER
SUBWOOFER
(L) (R)
FRONT(L) (R)
SPEAKERCABLE
 
						

							1 EnglishEnglish 1
02 Connections
SURROUNDCENTER
SUBWOOFER
HT-D550WK
NOTE
Refer to page 18 to install the Speakers on the Tallboy Stand.
✎
`
Speaker Components
Speaker Components
FRONT
(L) (R)
SURROUND
(L) (R)CENTER
STAND
STANDBASE SUBWOOFER
SPEAKER
CABLE
HT-D553WK
SCREW (5×15): 2EA
SCREW (4×20): 8EA
FRONT
(L) (R)
STAND
STANDBASE
SPEAKERCABLE
SURROUND
(L) (R)
SCREW (5×15): 4EA
SCREW (4×20): 16EA
Assembled Speakers


HT-D553WK
HT-D555WKHT-D555WK
Center SPEAKER
SURROUND  SPEAKER SUBWOOFER 
FRONT 
SPEAKER
FRONT 
SPEAKERS Center SPEAKER
SUBWOOFER 
CENTER
SUBWOOFER
(L) (R)
FRONT(L) (R)
SPEAKERCABLE
SURROUND SPEAKERS
 
						

							1 English
Connections
English 1
Installing the Speakers on the Tallboy Stand
* HT-D553K/D553WK only - Front Speakers
* HT-D555K/D555WK only - Front/Surround Speakers
Turn the Stand Base upside-down and connect it to the Stand.
Insert small screws (4*20, For connecting Stand & Stand 
Base) clockwise into the four holes marked using a 
screwdriver as shown in the illustration. 
 CAUTION : When you use a torque screwdriver, be 
careful not to put excessive force. Otherwise, it runs 
idle or can be damaged. (torque screwdriver- below 15 
kg.f.cm)
Connect the upper Speaker to the assembled Stand.
Insert another large screw (5*15, For connecting Speaker 
& Stand)
  clockwise into the hole on the rear of the 
speaker using a 
screwdriver.
This is the appearance after the speaker is installed. 
Follow this steps to install other speaker.
1.
2.
!
3.
4.
5.
2
4
2
4
1
Stand
Stand 
Base
443
Stand
Speaker
5
Connecting The Speakers
* HT-D550K/D553K/D555K only
Press down the terminal tab on the back of the speaker. 
Insert the black wire into the black terminal (–) and the red wire into the red 
terminal (+), and then release the tab.
Connect the connecting plugs to the back of the product by matching the 
Colors of the speaker plugs to the speaker jacks.
1.
2.
3.
BlackRed
NOTE
HT-D550WK/D553WK/D555WK do not have rear speaker connectors on the main unit. The rear speakers 
are connected to the Wireless Receiver Module.  See pages 19~20.
The rear speakers for HT-D550K/D553K/D555K can also be connected to the Wireless Receiver Module 
(SWA-5000) if you purchase it separately. See pages 19~20.
✎
`
`
In case of HT-D550K
AUDIO IN
OPTICAL
SURROUND SUBWOOFER SURROUND
SPEAKERS OUT
Front Speaker (R)
Subwoofer
Surround Speaker (R)
Surround Speaker (L)Front Speaker (L)
Center Speaker
 
						

							1 EnglishEnglish 1
02 Connections
Connecting The Speakers (Continued)
* HT-D550WK/D553WK/D555WK only
Wireless Receiver Module : SWA-5000
(HT-D550WK/D553WK/D555WK only)
Wireless Receiver Module
TX Card
Speaker Cable (2EA)
DIGITAL
AUDIO IN
OPTICAL
WIRELESSFM ANT
HDMI OUT
AUX IN 2COMPONENT
OUTVIDEOOUT
WIRELESS
In case of HT-D550WK
DIGITAL
AUDIO IN
OPTICAL
SUBWOOFER
SPEAKERS OUT
Front Speaker (R)
SubwooferCenter Speaker
Surround 
Speaker (R)
Wireless Receiver Module
Surround
Speaker (L)
*   Refer to page 17 for the HT-D553WK/D555WK speakers. The HT-D553WK/D555WK speakers connect in 
the same way. 
Front Speaker (L)
NOTE
This product should be connected with the SWA-5000 only.
✎
`
 
						

							0 English
Connections
English 1
NOTE
The rear speakers for HT-D550K/D553K/D555K can also be connected to the Wireless Receiver Module (SWA-5000) if you 
purchase it separately.
Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the product, 
some sound interruption may be heard due to interference.
If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that uses the same 
frequency (2.4/5.8GHz) near the product, some sound interruption may be heard due to interference.
The transmission distance from the product to the wireless receiver modul e is about 33 feet (10m), but may vary depending on 
your operating environment. If a steel-concrete wall or metallic wall is between the product and the wireless receiver module, the 
system may not operate at all, because the radio wave cannot penetrate metal.
If the product doesn't make wireless connection, the product needs ID Setting between the product and wireless receiver module. 
Insert the TX card in the rear of the product before entering Standby mode. 
Press  "0""1" "3" "5", and "5" using the numeric buttons on the remote control. You will see a message of  “W INT” on the 
screen.
With the wireless receiver module turned on, press "ID SET" button on the back of the wireless receiver module for 5 seconds.
CAUTION
Use the provided TX card only.
If a different TX card is used, the product may be damaged or the card may not be removed easily.
Do not insert the TX card upside down or in the reverse direction.
  Insert the TX card when the product is turned off. Inserting the card when it is turned on may cause a problem.
If the TX Card is inserted and wireless receiver module setting is complete, sound is not output from the surround Speaker 
connectors on the product.
 The wireless receiver antenna is built into the wireless receiver module. Keep it away from water and moisture.
For optimal listening performance, make sure that the area around the wireless receiver module location is clear of any 
obstructions.
If no sound is heard from the wireless receiver module, switch the mode to DVD 5.1 channel or Dolby ProLogic II .
In 2-CH mode, no sound will be heard from the wireless receiver module.
✎
`
`
`
`
`
`
!
`
`
`
`
`
`
`
`
Wireless Receiver Module (SWA-5000)
Press down the terminal tab on the back of the speaker. 
Insert the black wire into the black terminal (–) and the red wire into the red 
terminal (+), and then release the tab.
Connect the connecting plugs to the back of the product by matching the colors 
of the speaker plugs to the speaker jacks.
With the product turned off, insert the TX card into the 
TX Card Connection ( WIRELESS) on the back of the product.
Hold the TX card so that the label "WIRELESS" faces upward and insert the 
card into the port. 
The TX card enables communication between the product and the 
wireless receiver module. 
Connect the left and right surround speakers to the wireless Receiver module. 
Plug the power cord of the wireless Receiver module in the wall outlet.
1.
2.
3.
4.
~
~
5.
6.
FM ANTFA NET(Only For Service)DIGITAL
AUDIO IN WIRELESS
OPTICALSURROUND SUBWOOFER SURROUNDHDMI OUTSPEAKERS OUT
AUX IN 2 COMPONENT
OUT
VIDEOOUT(Only For Service)DIGITALAUDIO INOPTICALSURROUNDSUBWOOFERSURROUNDHDMI OUTSPEAKERS OUT
AUXIN 2COMPONENTOUT
VIDEOOUT
WIRELESS
TX card
BlackRed