Samsung Ht D5550k User Manual

0 EnglishEnglish 1
03 Setup
Display
You  can  confi gure  various  display  options  such  as 
the TV Aspect Ratio, Resolution, etc.
3D Settings
Select whether to play a Blu-ray Disc with 3D 
contents in 3D Mode.
SettingsDisplay
Audio
Network
System
Language
Security
General
Support3D Settings
HDMI Deep Color 
: Auto
Network
LanguageSecurity
3D Settings
HDMI Deep Color : Auto
3D Settings
> Move    " Enter    ' Return
3D Blu-ray Playback Mode  : Auto
Screen Size : 55  inch
3D Blu-ray...

 English
Setup
English 
tv aspect
Depending  on  the  type  of  television  you  have,  you 
may want to adjust the screen size setting.
16:9 Original : Select when you connect the 
product to a 16:9 TV screen. The product will 
display all content in its original aspect ratio. 
Content formatted in 4:3 will be displayed with 
black bars on the left and right.
16:9 Full  : Select when you connect the product 
to a 16:9 TV screen. All content will fill the full 
screen. Content...

 EnglishEnglish 
03 Setup
Resolution according to the output mode
Blu-ray Disc/E-contents/Digital Contents playback
Output 
Setup HDMI / connected
HDMI / not connected
HDMI Mode Component/ 
VIDEO Mode Component Mode
VIDEO Mode
Blu-ray Disc E-contents/
Digital 
contents Blu-ray DiscE-contents/
Digital 
contents
BD Wise Resolution of 
Blu-ray Disc 1080p@60F 480i
---
Auto Max. 
Resolution of  TV input Max. 
Resolution of  TV input 480i
---
1080p@60F 1080p@60F 1080p@60F 480i ---
Movie...

 English
Setup
English 
NOTE
If the TV you connected to the product does 
not support Movie Frame or the resolution you 
selected, the message “If no pictures are 
shown after the selection, please wait for 15 
seconds. And then, the resolution will be 
reverted to the previous value automatically. 
Would you like to make a selection?” appears. 
If you select Yes, the TV’s screen will go blank 
for 15 seconds, and then the resolution will 
revert to the previous resolution...

 EnglishEnglish 
03 Setup
Distance
If you cannot place the speakers at equal 
distances from the listening position, you can 
adjust the delay time of the audio signals from the  
front, Center, surround and subwoofer speakers.You can set the Speaker Distance between 
1ft (0.3m) and 30ft (9.2m).
SettingsDisplay
Audio
Network
System
Language
Security
General
SupportSettings
Network
Language
Distance
>
 Move    < Change    ' Return
Front L    10(ft) 3.0(m)   |Front R  :  10(ft)...

 English
Setup
English 
Musical Room Calibration 
By setting the Musical Room Calibration (MRC) 
function just once when you relocate or install the 
product, you can have the product automatically 
recognize the distance between speakers, levels 
between channels, and frequency characteristics 
to create a 5.1-channel sound fi eld optimized for 
your environment.
ASC IN
ASC IN500mA
500mAASC
microphone
Musical Room Calibration Mode
You will hear either the Musical Room Calibration...

 EnglishEnglish 
03 Setup
HDMI Audio 
The audio signals transmitted over the HDMI 
Cable can be toggled On/Off.Off :  Video is transmitted over the HDMI 
connection cable only, and audio is output 
through your product speakers only. 
On : 
Both video and audio signals are transmitted 
over the HDMI connection cable, and audio is 
output through your TV speakers only.
NOTE
HDMI Audio is automatically down-mixed to 
2ch for TV speakers.
Audio Return Channel
You can enjoy TV sound from...

 English
Setup
English 
Digital Output Selection
SetupPCMBitstream  
(Unprocessed) Bitstream  
(Re-encoded  DTS) Bitstream 
 (Re-encoded   Dolby D)
Connection HDMI supported 
AV receiver HDMI supported 
AV receiver HDMI supported 
AV receiver HDMI supported 
AV receiver
Audio Stream on Blu-ray Disc PCM Up to 7.1ch
PCM DTS re-encodedRe-encoded 
Dolby Digital *
Dolby Digital Up to 7.1ch Dolby Digital DTS re-encoded Re-encoded 
Dolby Digital *
Dolby Digital Plus Up to 7.1ch Dolby Digital...

 EnglishEnglish 
03 Setup
Audio Sync
Video may fall out of sync with the audio when 
the product is connected to a digital TV. If this 
occurs, adjust the audio delay time to match the 
audio to the video.You can set the audio delay time between 
0 msec and 300 msec. Set it to the optimal 
status.
network
Before you begin, contact your ISP to fi nd out if 
your IP address is static or dynamic. If it is 
dynamic, and you are using a wired or wireless 
connection, we recommend using the...

0 English
Setup
English 1
To enter the Network settings into your product, 
follow these steps:Press the ▲▼ buttons to select  Wired, and 
then press the  ENTER button.
Press the ◄► buttons to select  IP Settings, 
and then press the  ENTER button.
SettingsDisplay
Audio
Network
System
Language
Security
General
SupportSettings
Network
Language
IP Settings
m
 Move  Number  " Enter   ' Return
IP Mode  Manual
IP Address 0.0.0.0Subnet Mask 0.0.0.0Gateway 0.0.0.0DNS Mode  Manual
DNS Server...