Samsung Ht D330k User Manual

							10 EnglishEnglish 11
02 Connections
This section involves various methods of connecting the product to other external components. 
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Front Speakers ei
Place these speakers in front of your listening position, facing inwards (about 45°) 
toward you. Place the speakers so that their tweeters will be at the same height 
as your ear. Align the front face of the front speakers with the front face of the 
Center speaker or place them slightly in front of the Center speakers.
Center Speaker fIt is best to install it at the same height as the front speakers. You can also install it 
directly over or under the TV.
Surround Speakers
hj
Place these speakers to the side of your listening position. If there isn't enough 
room, place these speakers so they face each other. Place them about 60 to 
90cm above your ear, facing slightly downward.
*    Unlike the front and Center speakers, the surround speakers are used to 
handle mainly sound effects and sound will not come from them all the time.
Subwoofer 
gThe position of the subwoofer is not so critical. Place it anywhere you like.
Position of the product
Place it on a stand or cabinet shelf, or under the 
TV stand.
Selecting the Listening PositionThe listening position should be located about 2.5 
to 3 times the distance of the TV's screen size 
away from the TV. 
 Example :    For 32" TV's 2~2.4m   
For 
55" TV's 3.5~4m   
SW
CAUTION
Do not let children play with or near the speakers. They could get hurt if the speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+ /–) is correct.
   Keep the subwoofer out of the reach of children so as to prevent them from inserting their hands or alien 
substances into the duct (hole) of the subwoofer.
 

  Do not hang the subwoofer on the wall through the duct (hole).
NOTE
If you place a speaker near your TV set, screen Color may be distorted because of the magnetic field 
generated by the speaker. If this occurs, place the speaker away from your TV set.
!
`
`
`
`
✎
`
Connections
2.5 to 3 times the size of the TV screen
 
						

							1 English
Connections
English 1
(L) (R)
(L) (R)
FRONT SURROUNDCENTER
SUBWOOFER
Speaker Components
Connecting the wall mount
Prepare screws (not supplied) that are suitable 
for the hole on the back of each speaker.
See the illustrations below.
Fasten the screws to the wall, then hang the 
speaker on the wall.
1.
2.5 mm
10 mm
Hold on the back of the  speaker
30 mm 4 mm
8 to 10 mm
Depth of fastened screw
 
						

							1 EnglishEnglish 1
02 Connections
Connecting the video Out to your Tv
Choose one of the two methods for connecting to a TV.
METHOD 1 : Component (Progressive Scan) Video
If your television is equipped with Component Video inputs, connect a Component video cable (not supplied) 
from the COMPONENT OUT  (P
R, PB and Y) jacks on the back of the product to the Component Video Input 
jacks on your TV. 
METHOD 2 : Composite Video
Connect the supplied Video cable from the  VIDEO OUT jack on the back of the product to the VIDEO IN jack 
on your TV.
NOTE
When the Progressive scan mode is selected, the VIDEO output does not feed any signals.
This product operates in Interlace scan mode 480i(576i) for component/composite output.
After making the video connection, set the Video input source on your TV to match the corresponding Video 
output mode on your product. 
Turn this product on fi rst before you set the video input source on your TV. See your TV owner's manual for 
more information on how to select the TV's Video Input source.
CAUTION
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright 
protection systems and the picture will be distorted on the television.
✎
`
`
`
!
`
SURROUNDSURROUND
SUBWOOFER CENTER FRONT
FRONT
SPEAKERS OUT
SPEAKER IMPEDANCE : 3
FM ANT
VIDEO OUT
AUX IN
COMPONENT OUT
DIGITAL
AUDIO IN
ONLY
FOR SERVICE
FM ANT
AUX INDIGITALAUDIO IN
METHOD 2 (supplied)
RedBlue Green
METHOD 1
 
						

							1 English
Connections
English 1
Connecting the fm Antenna
Connect the FM antenna supplied to the FM Antenna jack.
Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a 
wall or other rigid surface.
NOTE
  This product does not receive AM broadcasts.
Connecting microphone
You can enjoy the feeling of a karaoke bar in the comfort of your home. 
Watch the video and sing along the lyrics displayed on the TV screen 
against the accompaniment.
Connect the microphone to the MIC jack on the front of the product.
Press the MIC VOL button to adjust the volume of the microphone.
Press the  ECHO button to adjust the echo level of the microphone.
   NOTE
If you hear strange noises (squealing or howling) while using the Karaoke feature, move the microphone away 
from the speakers. Turning down the microphone's volume or the speaker volume is also effective.
The microphone does not operate in the AUX and TUNER mode
1.
2.
✎
`
1.
2.
3.
✎
`
`
SURROUNDSURROUND
SUBWOOFER CENTER FRONT
FRONT
SPEAKERS OUT
SPEAKER IMPEDANCE : 3
FM ANT
VIDEO OUT
AUX IN
COMPONENT OUT
DIGITAL
AUDIO IN
ONLY
FOR SERVICEVIDEO OUT
AUX IN
COMPONENT OUT
DIGITALAUDIO IN
FM Antenna (supplied)
5V 500mAMIC 1 MIC 2
 
						

							1 EnglishEnglish 1
02 Connections
Connecting Audio from External Components
SURROUNDSURROUND
SUBWOOFER CENTER FRONT
FRONT
SPEAKERS OUT
SPEAKER IMPEDANCE : 3
FM ANT
VIDEO OUT
AUX IN
COMPONENT OUT
DIGITAL
AUDIO IN
ONLY
FOR SERVICESURROUNDSURROUNDSUBWOOFER
CENTERFRONTFRONTSPEAKERS OUT
SPEAKER IMPEDANCE : 3
FM ANT
VIDEO OUT
COMPONENT OUT
ONLYFOR SERVICE
Optical Cable
(not supplied)
Audio Cable (not supplied)
If the external Analog component 
has only one Audio Out, connect 
either left or right.
Set-Top Box VCR
AUX
OPTICAL
Red White
AUX : Connecting an External Analog Component
Analog signal components such as a VCR.
Connect  AUX IN (Audio) on the back of the product to the Audio Out of the external Analog component. 
Be sure to match the Colors of the connecting jacks.
Press the  FUNCTION  button to select  AUX input. 
The mode switches as follows : 
DVD/CD  ➞ D.IN  ➞ AUX  ➞ USB  ➞ FM
   NOTE
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the 
VCR to this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the  DIGITAL AUDIO IN  (OPTICAL ) on the back of the product to the Digital Output of the 
external digital component.
Press the  FUNCTION  button to select  D.IN.
The mode switches as follows : 
DVD/CD  ➞ D.IN  ➞ AUX  ➞ USB  ➞ FM
1.
~
2. ~
✎
`
1.
2.~
 
						

							1 English
Setup
English 1
Before Starting (Initial Setting)
Press the POWER button when it is plugged in 
TV for the first time. 
Initial Setting screen will be displayed.
Move    Select              Return
Initial settings I On-Screen Language
Select a language for the on-screen displays.
English
한국어
Nederlands FrançaisDeutsch Italiano
Press the ▲▼ buttons to select the desired 
language, then press the  ENTER button.
Press the  ENTER button to select Start button.
Press the ▲▼ buttons to select desired TV Aspect, 
then press the  ENTER button.
 
 NOTE
If you have not selected a preferred language in 
the initial settings, you will see a language 
selection window next time you turn on the 
product.
Your language selection will apply to all menus: 
On-Screen Menu, Disc Menu, Audio, Subtitle.
If you want to move to the previous screen, press the 
RETURN  button.
Once you select a menu language, you can change it by 
pressing the  STOP (@ ) button on the remote control for 
more than 5 seconds with no disc inserted.
When the Initial Setting screen does not appear, refer to 
the Initial Setting. (see page 18)
1.
2.
3.
4.
✎
`
`
`
`
`
Setting the Setup menu
The access step may differ depending on the selected 
menu. The GUI (Graphical User Interface) in this 
manual may differ, depending on the firmware version.
1 2 3
4 5 6
7 8
0 9
FUNCTION
TV SOURCE
DSP / EQ
A B C DS/W LEVEL
REPEAT USB REC DIMMER
P.SCANTUNER 
MEMORY
MO/STDISC
MENUTITLE
INFO GIGA
VOL
TV CH V
TUNING V
DVD RECEIVER SELECT
SAMSUNG TV
MUTE
POWER
P L
TOOLS
1 2 3
4 5 6
7 8
0 9
FUNCTION
TV SOURCE
DSP / EQ
A B C DS/W LEVEL
REPEAT USB REC DIMMER
P.SCANTUNER 
MEMORY
MO/STDISC
MENUTITLE
INFO GIGA
VOL
TV CH V
TUNING V
DVD RECEIVER SELECT
SAMSUNG TV
MUTE
POWER
P L
TOOLS
1
2
3
4
1MENU BUTTON : Display the home menu.
2
ENTER / DIRECTION BUTTON
Move the cursor and select an item. 
Select the currently selected item.
Confirm the setting.
3RETURN BUTTON : Return to the previous  
setup menu.
4EXIT BUTTON : Exit the setup menu.
Function    DVD/CD       Settings
Press the 
POWER button.
Press the 
_+ buttons to select  Settings, then 
press the  ENTER button.
Press the 
▲▼ buttons to select the desired 
menu, then press the  ENTER button.
Press the 
▲▼ buttons to select the desired sub-
menu, then press the  ENTER button.
Press the 
▲▼ buttons to select the desired 
item, then press the  ENTER button.
Press the  EXIT button to exit the setup menu.
1.
2.
3.
4.
5.
6.
 
						

							1 EnglishEnglish 1
03 Setup
Display
You can configure various display options such as 
the TV Aspect, Resolution, etc.
TV Aspect
Depending on the type of television you have, you 
may want to adjust the screen setting.
4:3 Pan-Scan~
Select when you want to see the 16:9 
video supplied by the DVD without the 
black bars on top and bottom, even 
though you have a TV with a 4:3 ratio 
screen(extreme left and right portion of 
the movie picture will be cut off).
4:3 Letter Box~
Select when you want to see the total 
16:9 ratio screen DVD supplies, even 
though you have a TV with a 4:3 ratio 
screen. Black bars will appear at the 
top and bottom of the screen.
16:9 Wide~
You can view the full 16:9 picture on 
your widescreen TV.
NOTE
If a DVD is in the 4:3 ratio, you cannot view it in the wide screen.
Since DVD discs are recorded in various image formats, they 
will look different depending on the software, the type of TV, 
and the TV aspect ratio setting.
Video Out Signal
 
Different countries apply different TV standard. 
You can select from NTSC or PAL.NTSC :   You can select the NTSC video format.
PAL :  You can select the PAL video format.
Audio
Speaker Setting
Speaker Size
You can set the Speaker Size of the Center and Surround 
Speakers, as well as Test Tone in this mode.
✎
`
`
~
~
Settings
mMove    " Select    ' Return
Speaker Setting
Speaker Size  ▶Sound Edit
Delay Time
T
est Tone  :   Off
 Select   Return
For the Front, the mode is set to Small.
For the Subwoofer, the mode is set to Present.
For the Center and Surround, you can switch the 
mode to Small or None.
- Small  :    Select this when using the speakers.
- None  : 
  Select this when no speaker is 
connected.
NOTE
The speaker mode may vary depending on the 
Dolby Pro Logic and Stereo settings.
Sound Edit
You can adjust the balance and level for each speaker.
Settings
mMove    " Select    ' Return
Sound Edit 

						

							1 English
Setup
English 1
Delay Time
If the speakers cannot be placed at equal distances from 
the listening position, you can adjust the delay time of the 
audio signals from the Center and  Surround speakers.
 
You can also set the Test Tone in this mode.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can 
enjoy the best sound if the distance between you 
and each speaker is the same.  
Since the sounds arrive at the listening position at 
different times depending on the placement of 
speakers, you can adjust this difference by adding a 
delay effect to the Center and Surround Speakers.
Settings
mMove    " Select    ' Return
						

							1 EnglishEnglish 1
04 Basic Functions
System
Initial Settings
By using the Initial Setting, you can set the language and 
TV aspect. 
DivX(R) Registration
View DivX(R) VOD Registration Code to purchase
and play DivX(R) VOD content.
Security
The Parental Lock function works in conjunction with 
DVDs that have been assigned a rating, which helps you 
control the types of DVDs that your family watches. 
There are up to 8 rating levels on a disc.
Parental Rating
Select the rating level you want to set. 
A larger number indicates that the program is intended 
for adult use only. For example, if you select up to Level 
6, discs that contain Level 7, 8 will not play.
Enter the password and then press the ENTER button.
- The password is set to "0000" by default.
-
    Once the setup is complete, you will be taken to the 
previous screen.
Change Password
Select  Change  and enter the 4-digit password to set 
the parental lock using the number buttons on the 
remote control.
If you forgot your password
Remove the disc.
Press and hold the  STOP (@ ) button on the 
remote control for 5 seconds or more. All 
settings will revert to the factory settings.
Support
Product Information
Provide the product information such as Model 
code, Softrware Version, etc.
1.
2.
Disc Playback
  Press the  OPEN/CLOSE  (^ ) button.
Place a disc gently into the tray with the disc's 
label facing up.
Press the  OPEN/CLOSE  (^ ) button to close 
the disc tray.
NOTE
Resume function: When you stop disc play, the 
product remembers where you stopped, so when 
you press  PLAY button again, it will pick up 
where you left off. (This function works only with 
DVDs.) 
Press the  STOP button twice during playback to 
disable the Resume function.
If no buttons are pressed on the product or 
remote control for more than 3 minutes when the 
product is in Pause mode, it will change to STOP 
mode.
The initial screen may appear different, depending 
on the content of the disc.
Pirated discs will not play in this product because 
they violate the CSS(Content Scrambling System: 
a copy protection system) recommendations.
a    will appear when an invalid button is pressed.
TV Screen Saver/Power Saving Function
If no button input is made for more than 5 minutes 
in Stop or Play mode, the screen saver will get 
activated.
If the product is left in the screen saver mode for 
more than 20 minutes, the power will 
automatically turn off. (Except when playing 
music.)
1.
2.
3.
✎
`
`
`
`
~
~
Basic Functions
 
						

							0 English
Basic Functions
English 1
 
 
 
 Audio CD(CD-DA)/mP3/WmA Playback
BA
Track01
1/17
0:15  /  3:59
Function   DVD/CD                            Repeat   Play Mode
Insert an Audio CD(CD-DA) or an MP3 Disc into the 
disc tray.
For an Audio CD, the first track will be played 
automatically. 
-
    Press the  [] buttons to move to the 
previous/next track.
For the MP3/WMA disc, press the  _+ 
buttons to select  Music, then press the 
ENTER  button.
- 

 
Press the ▲▼ _+ buttons to select  a 
desired file and press the ENTER button. 
- 

 
Press the ()  buttons to move to the 
previous/next pages.
Press the  STOP (@ ) button to stop playback.
NOTE
Some MP3/WMA-CDs may not play, depending on 
the recording mode.
Table of contents of a MP3-CD varies depending on 
the MP3/WMA track format recorded on the disc.
The WMA-DRM files and DTS CD cannot be 
played. 
When MP3/WMA/CD playing, number key 
doesn't work.
1.
~
~
2.
✎
`
`
`
`
JPEG file Playback
Images captured with a digital camera or camcorder, or 
JPEG files on a PC can be stored on a CD and then 
played back with this product.
Insert a JPEG disc on the disc tray.
Press the 
_+ buttons to select  Photo, and 
then press the  ENTER button.
Press the ▲▼ buttons to select the folder you 
want to play, and then press the  ENTER button.
Press the ▲▼ buttons to select the photo you 
want to play, and then press the ENTER button.
The selected file will play and slide show will 
start.
To stop slide show, press the  PAUSE (# ) 
button.
You can view the previous/next file by 
pressing the ◀,▶ buttons during the 
slideshow mode.
2011/01/01
JPEG 1
JPEG 2
JPEG 3
Function   DVD/CD                            Pages     Return
642 X 352
ROOT
Rotate Function   
G
Press the GREEN(B)  or YELLOW(C) button during the 
PAUSE mode.
GREEN(B)  Button: Rotate 90° counterclockwise.
YELLOW(C)  Button: 
Rotate 90° clockwise.
NOTE
The maximum resolutions supported by this 
product are 5120 x 3480 (or 19.0 MPixel) for 
standard JPEG files and 2048 x 1536 (or 3.0 
MPixel) for progressive image files. 
1.
2.
3.
4.
~
~
~
~
~
✎
`