Samsung Ht C6950w User Manual

0 English
English 1

03
Setup

tv aspect
Depending  on  the  type  of  television  you  have,  you may want to adjust the screen setting.
16:9 Normal•
Certain  movies(4:3  source) w i l l   b e   d i s p l a y e d   i n   4 : 3 Pillarbox (black bars on sides of  picture)  if  16:9  normal  is selected.
16:9 Wide•
You  can  view  the  full  16:9 picture  on  your  widescreen TV.
4:3 Letter Box•
Select when you want to see the  total  16:9  ratio  screen  a Blu-ray  Disc/DVD  supplies, even...

 English

Setup

English 

Resolution according to the output mode
Blu-ray Disc playback
Output Setup
HDMI / connectedHDMI / not connected
HDMI ModeComponent/VIDEO ModeComponent ModeVIDEO Mode
AutoOptimal Resolution576i(480i)--
1080p, Movie Frame(24Fs) off1080p@60F576i(480i)--
1080p/1080i, Movie Frame(24Fs) on1080p@24F576i(480i)--
1080i, Movie Frame(24Fs) off1080i576i(480i)1080i576i(480i)
720p720p576i(480i)720p576i(480i)
576p(480p)576p(480p)576i(480i)576p(480p)576i(480i)...

 English
English 

03
Setup

HDMI Format
You can optimize the colour setting from the 
HDMI output. Select a connected device Type.
tv : Select if connected to a TV via HDMI. 
m onitor
 : Select if connected to a Monitor via 
HDMI.
NOTE
A TV or monitor has to be connected to the 
product before you select this option.
Movie Frame (24 Fs)
Setting the Movie Frame (24Fs) feature to On
allows you to adjust the product's HDMI output to
24 frames per second for improved picture...

 English

Setup

English 

audioDistance
If the speakers cannot be placed at equal 
distances from the listening position, you can 
adjust the delay time of the audio signals from the 
front, centre, surround, surround back and 
subwoofer speakers.
You can set the Speaker Distance between 
1ft(0.3m) and 30ft(9.0m).
DisplayAudioSystemNetworkLanguageSecurityGeneralSupport
Settings DistanceFront L  :  10ft (3.0m) |Front R  :   10ft (3.0m)Center  :  10ft (3.0m)Surround L  :  10ft...

 English
English 

03
Setup

Musical Auto Calibration 
By setting the Musical Auto Calibration (MAC) 
function just once when you relocate or install the 
product, you can have the product automatically 
recognize the distance between speakers, levels 
between channels, and frequency characteristics 
to create a 7.1-channel sound field optimized for 
your environment.
ASC microphone
Musical Auto Calibration
You will hear either the Musical Auto Calibration 
mode or the User Speaker...

 English

Setup

English 

Digital Output
Set Digital output depending on the connected 
receiver. (For more details, please refer to the 
digital output selection) 
PCM
Bistream(Re-encode)
Bistream(Audiophile)
Blu-ray Discs may include three audio streams.
-   Primary Audio : The audio soundtrack of the 
main feature.
-  
Secondary Audio : Additional soundtrack 
such as director or actor's commentary.
-  
Interactive Audio : Interactive sounds will be 
heard when selected....

 English
English 

03
Setup

Dynamic Range Control
You can listen at low volumes but still hear dialog 
clearly. This is only active when a Dolby Digital 
signal is detected.
Auto : The Dynamic Range Control will be set 
automatically based on the information 
provided by the Dolby TrueHD Soundtrack.
Off : Turn Dynamic Range Control off.
On : Choose to listen to a movie at a lower 
volume without losing clarity of dialog.
AV Sync
Video may look slower than the audio when the 
product...

 English

Setup

English 

Description of Device(Storage) Information on 
the Product
Total Size : Total size of the Device (Storage).
Available Size : Available size of the Device (Storage).
NOTE
In the external memory mode, disc playback 
will be stopped if you disconnect the USB 
device in the middle of the playback.
Only those USB  devices formatted in FAT fi le 
system (DOS 8.3 volume label) are supported, 
and it is recommended to use USB devices 
that support USB 2.0 protocol,...

 English
English 

03
Setup

network Setup
To begin setting up the network connection for 
your product, follow these steps:
In the Home menu, press the ◀▶ buttons to 
select the Settings, and then press the 
ENTER button.
Press the ▲▼ buttons to select Network, 
and then press the ENTER button.
Press the ▲▼ buttons to select Network 
Settings, and then press the ENTER button.
Press the ▲▼ buttons to select Network 
Type, and then press the ENTER button.
Press the ▲▼ buttons to...

0 English

Setup

English 1

Use the number buttons on your remote to 
enter numbers.
When done with each fi eld, use the ▶ 
button to move successively to the next 
fi eld.
You can also use the other arrow buttons to 
move up, down, and back.
Enter the IP Address, Subnet Mask, and 
Gateway values.
Press the ▼ button to go to DNS.
Press the ▼ button to go to the fi rst DNS 
entry fi eld.
Press the RETURN button on your remote.
Run a Network Test to ensure the product 
has connected to your...