Samsung Ht C5550 User Manual

English 21
02 Connections
NOTE
This product should be connected with the SWA-5000 only.
✎

  Wireless Receiver Module : SWA-5000 
Wireless Receiver ModuleTX Card Speaker Cable (2EA)
* HT-C5530W only
* HT-C5550W only
FM ANT.IPODFM ANT.IPODSPEAKER IMPEDANCE : 3 
SPEAKER IMPEDANCE : 3 
Front Speaker (R)Subwoofer
Centre Speaker
Wireless Receiver Module
Surround 
Speaker (L)
In case of HT-C5530W
Front Speaker (L)
Surround 
Speaker (R)
Refer to page 18 for the HT-C5550W speaker.
H T-C 5500(3 0,5 0)_ X...

22 English
Connections
Press down the terminal tab on the back of the speaker.
Insert the black wire into the black terminal (–) and the red wire \
into the red 
terminal (+), and then release the tab.
Connect the connecting plugs to the back of the product by matching the 
colors of the speaker plugs to the speaker jacks.
With the product turned off, insert the TX card into the 
TX Card Connection (WIRELESS) on the back of the product.
Hold the TX card so that the label "WIRELESS" faces upward...

English 23
02 Connections
Connecting External Devices/your TV via HDMI
HDMI is a standard digital interface for connection to such devices as a\
 TV, projector, DVD player, Blu-ray 
player, set top box and more.
HDMI removes any loss of signal from analogue conversion, enabling you t\
o enjoy video and audio sound 
quality as it was originally created in the digital source.
HDMI OUT : Connecting to a TV with an HDMI Cable (BEST QUALITY)
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the...

24 English
Connections
HDMI IN : Connecting to an External Component with an HDMI Cable
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back\
 of the product to the 
HDMI OUT jack on your digital devices.
Press the FUNCTION  button to select  HDMI 1 or HDMI 2  input.
The mode switches as follows 

#%%7%
 
%
*/
  69

  )%.*

 
)%.*

 
.
HDMI Auto Detection Function
The product's video output will automatically change to HDMI mode when c\
onnecting an HDMI cable 
before...

English 25
02 Connections
METHOD 1 : Component Video  (BETTER QUALITY)
If your television is equipped with Component Video inputs, connect a Co\
mponent video cable (not 
supplied) from the Component Video Output (Pr, Pb and Y) Jacks on the\
 back of the product to the 
Component Video Input Jacks on your TV.
 NOTE
You can select from a variety of resolution settings such as 1080i, 720p\
, 576p(480p) and 576i(480i), 
depending on the disc type. (See page 32)
The actual resolution may differ from the...

26 English
Connections
Connecting Audio from External Components
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-T\
op Box).
Connect the Digital Input (OPTICAL) on the product to the Digital Outp\
ut of the external digital 
component.
  Press the FUNCTION  button to select  D.IN input.
The mode switches as follows :  BD/DVD  D. IN   AUX   HDMI 1   HDMI 2   FM
NOTE
To see video from your Cable Box/Satellite receiver, you must...

English 27
02 Connections
Connecting to the Network
This product enables you to view network based services (See pages 57~6\
2) such as Internet@TV and
BD-LIVE, as well as receive software upgrades when a network connection \
is made. We recommend
using an AP (Access Point) or IP router for the connection.
For more information on router connection, refer to the user manual of t\
he router or contact the router
manufacturer for technical assistance.
Cable Network
Using the Direct LAN Cable (UTP cable),...

28 English
Connections
Wireless Network
You can connect to the network with a Wireless IP sharer.A wireless AP/IP router is required to make a wireless network connectio\
n. Connect the wireless
LAN adapter to the Wireless LAN Adapter on the rear panel of the product\
. 
Set the network options. (See page 39)
NOTE
This product is compatible with only Samsung's Wireless LAN Adapter. (n\
ot supplied) (Model name: WIS09ABGN).
-  The Samsung Wireless LAN Adapter is sold separately. Contact a Samsung E\...

English 29
03 Setup
Before Starting (Initial Settings)
Turn on your TV after connecting the product.
(When the product is connected to TV for the fi rst 
time,  product  will turn on automatically and the 
Initial Settings screen will be displayed.)
 > Move s Select
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
English
Français
Deutsch
Español
Italiano
Nederlands
Press the ▲▼ buttons to select the desired 
language, then press the  ENTER button.
Press the  ENTER...

30 English
Setup
If you want to display Initial Settings screen 
again in order to make changes, press the 
STOP ( ) button on the front panel of the 
product for more than 5 seconds with no disc 
inserted.
Use the HDMI cable to connect the product to 
an  Anynet+(HDMI-CEC) -compliant Samsung TV.
If the TV uses a language supported by the 
product, that language will be set to a 
preferred language automatically.
However, the  Anynet+(HDMI-CEC)  feature 
should be set to  On in both TV and the...