Samsung Ht C553 User Manual

							
0 English
English 1

03
Setup

NOTE
ASC setup can be made when there is no disc in the product.
You cannot adjust the volume using the volume control buttons, because the volume level is fixed during the ASC setup.
If the auto sound microphone is disconnected during the ASC setup, the setup will be cancelled.
When ASC function is activated, the DSP/EQ, Dolby Pro Logic ll and P. BASS sound effects will not work.
If the product is connected to external devices or other components (such as an AUX, D.IN), the ASC Setup may not work exactly.
Auto Sound Calibration
You will hear either the ASC mode or the User Speaker Settings.
ON:  
You will hear sound in the Auto Sound Calibration(ASC) mode.
OFF:   
You will hear sound in the Speaker Setting value.
Settings
Move    Select              ReturnChange   Select              Return
Auto Sound Calibration             :    ON   ▶Auto Sound Calibration Setting                                  
Auto Sound Calibration
Auto Sound Calibration Setting
Plug the ASC microphone into the ASC input jack.
Place the ASC microphone at the listening position.
Auto Sound Calibration will be automatically set up in the following sequence: Front Left ; Center ; Front Right ; Rear Right ; Rear Left ; Subwoofer
Press the RETURN button to cancel the Auto Sound Calibration Setting.
When the message "REMOVE MIC" appears on the display, unplug the ASC microphone. 
✎
`
`
`
`
`
~
~
1.
2.
~
~
~
NOTE
Setting the Auto Sound Calibration function takes about 3 minutes.
DRC (Dynamic Range Compression)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
You can select either off, 2/8, 4/8, 6/8, Full.
AV-SYNC
Video and audio sync may not match with digital TV. If this occurs, adjust the audio delay time tomatch the video
You can set the audio delay time between 0 mSec and 300 mSec. Set it to the optimal status.
HDMI AUDIO
The audio signals transmitted over the HDMI Cable can be toggled On/Off.
On :   
Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only.
Off :   
Video is transmitted over the HDMI connection cable only, and audio is output through the product speakers only.
NOTE
The default setting of this function is HDMI Audio Off.
HDMI Audio is automatically down-mixed to 2ch for TV speakers.
When HDMI Audio is set to On, PL II /DSP EQ /P.BASS doesn't work.
EQ Optimizer
Set optimal EQ automatically depending on the region.
Off:  
Turn EQ Optimizer off.
On:  Turn EQ Optimizer on.
✎
`
~
~
~
~
✎
`
`
`
~
~
DownloadedFromTheatreSystem-Manual.comManuals 
						

							
 English

Setup
English 
System
Initial Setting
By using the Initial Setting, you can set language,
TV aspect and ASC(Auto Sound Calibration) setting.
Check if the ASC microphone is connected to the product.
NOTE
If an HDMI cable is connected to the product, the TV aspect does not appear and it is set to 16:9 Wide automatically.
DivX(R) Registration
View DivX(R) VOD Registration Code to purchase
and play DivX(R) VOD content. 
Language
You can select the language you prefer for on-screen menu, disc menu, etc.  
OSD LanguageSelect the language for the on-screen displays.
Disc MenuSelect the language for the disc menu displays.
AudioSelect the language for disc audio.
SubtitleSelect the language for disc subtitles.
a  To select another language, select OTHERS of Disc Menu, Audio and Subtitle, and enter the country code. (see page 43).
a  
You cannot select OTHERS in the OSD Language menu.
NOTE
The selected language will only appear if it is supported on the disc.
✎
`
✎
`
Security
The Parental Lock function works in conjunction with DVDs that have been assigned a rating which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
Parental Rating
Select the rating level you want to set. A larger number indicates that the program is intended for adult use only. For example, if you select up to Level 6, discs that contain Level 7, 8 will not play.
Enter the password and then press the ENTER button.
- The password is set to "7890" by default.
-   Once the setup is complete, you will be taken to the
 previous screen.
Change Password
Select Change and enter the 4-digit password to set the parental lock using the number buttons on the remote control.
Settings
Move    Select              Return
Perental   : OffPassword   : Change   ▶DisplayAudioSystemLaguageSecuritySupport
If you forgot your password
Remove the disc.
Press and hold the STOP (@) button on the remote control for 5 seconds or more. All settings will revert to the factory settings.
Support
Product Information
Product information such as Model code, Software Version, etc. is provided.
1.
2.
 
						

							
 English
English 

04
Basic Functions
Disc Playback
 
Press the OPEN/CLOSE (^) button.
Place a disc gently into the tray with the disc's label facing up.
Press the OPEN/CLOSE (^) button to close the disc tray.
NOTE
Resume function: When you stop disc play, the product remembers where you stopped, so when you press PLAY button again, it will pick up where you left off. (This function works only with DVDs.) Press the STOP button twice during playback to disable the Resume function.
If no buttons are pressed on the product or remote control for more than 3 minutes when the product is in Pause mode, it will be changed STOP mode.
The initial screen may appear different, depending on the content of the disc.
Pirated discs will not run in this product because it violates the CSS (Content Scrambling System : a copy protection system) recommendations.
※   will appear when an invalid button is pressed.
TV Screen Saver/Power Saving Function
If the product is left in the stop mode more than 5 minutes without any user interface, a screen saver will appear on your TV.
If the product is left in the screen saver mode for more than 25 minutes, the power will automatically turn off (Automatic Power-Off Function).
    
1.
2.
3.
✎
`
`
`
`
~
~
Basic Functions
Audio CD(CD-DA)/mP3/WmA Playback
BA
Track011/17
0:15  /  3:59
Function   DVD/CD                            Repeat   Play Mode
Insert an Audio CD(CD-DA) or an MP3 Disc into the disc tray.
For an Audio CD, the first track will be played automatically. 
-   
Press the [] buttons to move to the previous/next track.
For the MP3/WMA disc, press the _+ buttons to select Music, then press the ENTER button.
-   Press the 
$%_+ buttons to select  a desired file and press the ENTER button. 
-   Press the () buttons to move to the previous/next pages.
Press the STOP (@) button to stop playback.
NOTE
Some MP3/WMA-CDs may not play, depending on the recording mode.Table of contents of a MP3-CD varies depending on the MP3/WMA track format recorded on the disc.
WMA-DRM files cannot be played.
1.
~
~
2.
✎
`
`
`
DownloadedFromTheatreSystem-Manual.comManuals 
						

							
 English

Basic Functions

English 

JPeG file Playback
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this product.
Insert a JPEG disc on the disc tray.
Press the _+ buttons to select Photo, and then press the ENTER button.
Press the $% buttons to select the folder you want to play, and then press the ENTER button.
Press the ▲▼ buttons to select the photo you want to play, and then press the ENTER button.
The selected file will play and slide show will start.To stop slide show, press the PAUSE (#) button.You can view the previous/next file by pressing the ◄,► buttons during the slideshow mode.
2010/01/01
JPEG 1JPEG 2JPEG 3
Function   DVD/CD                            Pages     Return
642 X 352
../ PICTURES
Rotate Function   
G
Press the GREEN(B) or YELLOW(C) button during the PAUSE mode.
GREEN(B) Button: Rotate 90° Counterclock wise.
YELLOW(C) Button: Rotate 90° Clockwise.
NOTE
The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files.     
1.
2.
3.
4.
~
~
~
~
~
✎
`
using the Playback function
Forward/Reverse Search
BDA
Press the () buttons for Search Function.
    ( 1 ➞ ( 2 ➞ ( 3 ➞ ( 4
    ) 1 ➞ ) 2 ➞ ) 3 ➞ ) 4
NOTE
During the fast playback of the CD, sound is only heard at 1 and 2 step speed.
No sound is heard during the fast playback of the DVD/DivX.
Skipping Scenes/Songs
BAD
Press the [] buttons.
Each time the button is pressed during playback, the previous or next chapter, track or directory (file) will be played.
You cannot skip chapters consecutively.
Slow Motion Play        
D
Press the PAUSE (#) button and then ) button for Slow Motion play.
*1 ➞*2 ➞*3
D*1 ➞*2 ➞*3
NOTE
No sound is heard during slow playback.
Reverse slow playback does not work.
✎
`
`
~
~
✎
`
`
DownloadedFromTheatreSystem-Manual.comManuals 
						

							
 English
English 

04
Basic Functions

Step Motion Play   
D
Press the PAUSE button repeatly.
The picture moves forward one frame each time the button is pressed during playback.
NOTE
No sound is heard during step motion playback.
5 Minute Skip function   D
During playback, press the _,+ button.
Playback skips 5 minutes forward whenever you press the + button.
Playback skips 5 minutes backward whenever you press the _ button.
NOTE
You can operate this function only on the DivX.
Using the Disc Menu  
You can view the menus for the audio language, subtitle language, profile, etc. 
During playback, press the DISC MENU button on the remote control.
Press the $%_+ buttons to make the desired selection, then press the ENTER button.
NOTE
Depending on the disc, menu setup items may vary and this menu may not be available.  
 
 
~
✎
`
~
~
✎
`
1.
2.
✎
`
Using the Title Menu  
For DVDs containing multiple titles, you can view the title of each movie. 
 During playback, press the TITLE  MENU button on the remote control.
Press the $%_+ buttons to make  the desired selection, then press the  ENTER button.
NOTE
Depending on the disc, menu setup items may vary and this menu may not be available.
1.
2.
✎
`
FUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTEMIC VOL+
MIC VOL-
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCDTUNER MEMORY
DIMMERS . VOLAUDIO UPSCALEP .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9
RDS DISPLAY
ECHO
FUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTEMIC VOL+
MIC VOL-
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCDTUNER MEMORY
DIMMERS . VOLAUDIO UPSCALEP .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9
RDS DISPLAY
ECHO
 
						

							
 English

Basic Functions

English 

Repeat Playback
BAD
DVD/DivX Repeat
You can repeat the title, chapter or the section(A-B Repeat) of the DVD/DivX.
Repeat    OFF  
During the DVD/DivX playback, press the REPEAT button on the remote control.
Press the $% buttons to select a desired repeat mode, then press the ENTER button.
Press the ▲▼ buttons to select OFF to return to normal play, then press the ENTER button.
ZTitle ➞ Chapter ➞ A - ➞ Off
DTrack ➞ Dir (Directory) ➞ Disc ➞ Off
CD/MP3 Repeat
During the CD/ MP3 playback, press the REPEAT button repeatedly to select the repeat mode you want.
B
  ;   ;  ; ; 
(Normal ; Repeat Track ; Repeat All ; Random ; Repeat Section A-B)
A
;   ;  ; ; 
(Normal  ; Repeat Track; Repeat Dir ; Repeat All; Random)
1.
2.
3.
1.
A-B Repeat Playback
B
You can repeatedly play back a designated section of a DVD or CD.
During the DVD disc or CD playback, press the REPEAT button on the remote control.
For DVD, press the $% buttons to select A-.For CD press the REPEAT button repeatedly 
until appears.
Press the ENTER button at the point where you want repeat play to start (A).
Press the ENTER button at the point where you want repeat play to stop (B).
To return to normal playback,For DVD, press the $% buttons to select to OFF. For CD, press the REPEAT button to select to .
NOTE
The A-B Repeat function does not operate with DivX, MP3 or JPEG discs.
1.
2.
3.
4.
5.
✎
`
FUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTEMIC VOL+
MIC VOL-
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCDTUNER MEMORY
DIMMERS . VOLAUDIO UPSCALEP .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9
RDS DISPLAY
ECHO
 
						

							
 English
English 

04
Basic Functions

Displaying Disc Information
D
Change   Select
03/04001/0010:00:21KO 1/2EN 02/021/1
During the playback, press the TOOLS button on the remote control.
Press the $% buttons to select the desired item.
Press the _+ buttons to make the desired setup change and then press the ENTER button.-  You may use the number buttons of the remote control to control some item.
To make Disc information disappear, press the TOOLS button again.
NOTEIf you are playing contents from the tools menu, some functions may not be enabled depending on the disc.You can also select DTS, Dolby Digital or Pro Logic, depending on the disc.Some tools menu may differ depending on discs and fi les.
TOOLS menu
Title(  ) : To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identifi ed as a Title.Chapter(  ) : Most DVD discs are recorded in chapters so that you can quickly fi nd a specifi c chapter.Playing time(  ) : Allows playback of the fi lm from a desired time. You must enter the starting time as a reference. The time search function does not operate on some discs.
1.
2.
3.
4.
✎`
`
`
`
`
`
Audio(  ): Refers to the fi lm's soundtrack language. A DVD Disc can contain up to 8 audio languages.Subtitle(  ): Refers to the subtitle languages available in the disc. You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen. A DVD Disc can contain up to 32 subtitle languages.Angle(  ): When a DVD contains multiple angles of a particular scene, you can use the Angle function.
Selecting the Audio Language
D
Press the TOOLS button.
Press the $% buttons to select AUDIO (  ) display.
Press the _+ buttons or numeric buttons to select the desired audio language.
Depending on the number of languages on a DVD disc, a different audio language is selected each time the button is pressed.
`
`
`
1.
2.
3.
~
FUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTEMIC VOL+
MIC VOL-
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCDTUNER MEMORY
DIMMERS . VOLAUDIO UPSCALEP .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9
RDS DISPLAY
ECHO
 
						

							
 English

Basic Functions

English 

Selecting the Subtitle Language
D
Press the TOOLS button.
Press the $% buttons to select SUBTITLE (  ) display.
Press the _+ buttons or numeric buttons to select the desired subtitle language.
Depending on the number of languages on a DVD disc, a different subtitle language is selected each time the button is pressed.
NOTE
Depending on the disc, the Subtitle and Audio Language functions may not be available.On the DivX file format, the subtitle languages may be represented by only numbers.
Caption Function
D
You must have some experience with video extraction and editing in order to use this feature properly. 
To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media file (*.avi) within the same folder.  
Example.   Root    Samsung_007CD1.avi Samsung_007CD1.smi
Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the file name.
The subtitle of DivX files are *.smi, *.sub, *.srt over 148 kbyte is not supported.
Angle Function                     
This function allows you to view the same scene in different angles.
Press the TOOLS button.
Press the $% buttons to select ANGLE () display.
1.
2.
3.
~
✎
`
`
~
~
~
~
1.
2.
Press the _+ buttons or numeric buttons to select the desired angle.
NOTE
The Angle function works only with discs on which multiple angles have been recorded.
Sound mode
P.BASS 
The P.BASS function provides a bass boost to reinforce the low frequencies.
The MP3 ENHANCE function provides better sound quality by upscaling the sampling frequency.
Press the P.BASS button.
2 Channel
LPCM source
POWER BASS ON ➞
POWER BASS OFF
MP3 file 
POWER BASS ON ➞
POWER BASS OFF ➞
MP3 ENHANCE ON
NOTE
The P.BASS function is only available with 2 channel LPCM sources such as MP3, Divx, CD and WMA. 
The P.BASS function does not work with DSP/EQ or Dolby Pro Logic ll modes. If you press P.BASS in the DSP/EQ mode, the DSP/EQ mode is automatically shut off and the  P. BASS function will be turned on.The MP3 Enhancement function is only available 
with MP3 files. 
3.
✎
`
✎
`
`
`
FUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTEMIC VOL+
MIC VOL-
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCDTUNER MEMORY
DIMMERS . VOLAUDIO UPSCALEP .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9
RDS DISPLAY
ECHO
 
						

							
 English
English 

04
Basic Functions

DSP (Digital Signal Processor)/EQ
DSP (Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments. 
EQ : You can select ROCK, POP, or CLASSIC etc. to optimize the sound for the genre of music you are playing.
Press the DSP/EQ button.
POPS, JAZZ, ROCK
Depending on the genre of music, you can select POP, JAZZ, and ROCK.
STUDIOProvides a sense of presence as if in a studio.
CLUBSimulates the sound of a dance club with a throbbing bass beat.
HALLProvides a clear vocal as if listening in a concert hall.
MOVIEProvides the feeling of a movie cinema.
CHURCHGives the feel of being in a grand church.
PASSSelect this for normal listening.
S.VOL (SMART VOLUME)
This will regulate and stabilize the volume level 
against a drastic volume change when changing 
channels or during a scene transition.
Press the S.VOL button.
Each time the button is pressed, the selection changes as follows :
 SMART VOLUME ON  ➞  SMART VOLUME OFF
~
~
~
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio mode. 
Press the PL II button.
MUSICWhen listening to music, you can experience sound effects as if you are listening to the actual performance.
CINEMAAdds realism to the movie soundtrack.
PROLOG
You will experience a realistic multi-channel effect, as if using six speakers, while using just the front left and right speakers.
MATRIXYou will hear multi channel surround sound.
STEREOSelect this to listen to sound from the front left and right speakers and the subwoofer only.
NOTE
When selecting Pro Logic II mode, connect 
your external device to the AUDIO INPUT jacks  
(L and R) on the product. If you connect to only 
one of the inputs (L or R), you cannot listen to 
surround sound.
The Pro Logic II function is only available in 
Stereo mode.
✎
`
`
FUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTEMIC VOL+
MIC VOL-
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCDTUNER MEMORY
DIMMERS . VOLAUDIO UPSCALEP .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9
RDS DISPLAY
ECHOFUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTEMIC VOL+
MIC VOL-
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCDTUNER MEMORY
DIMMERS . VOLAUDIO UPSCALEP .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9
RDS DISPLAY
ECHO
FUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTEMIC VOL+
MIC VOL-
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCDTUNER MEMORY
DIMMERS . VOLAUDIO UPSCALEP .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9
RDS DISPLAY
ECHO
 
						

							
0 English

Basic Functions
English 1
Listening to radio
Using buttons on the Remote Control
Press the FUNCTION button to select FM.
Tune in to the desired station.
Automatic Tuning 1 : When the [ ] buttons is pressed, a preset broadcast station is selected.Automatic Tuning 2 : Press and hold the 
TUNING/CH () button to automatically 
search for active broadcasting stations.  
Manual Tuning : Press the TUNING/CH () button to increase or decrease the frequency incrementally.
Using buttons on the product 
Press the FUNCTION (  ) button to select FM.
Select a broadcast station.
Automatic Tuning 1 : Press the STOP ( @ ) button to select PRESET and then press the  
 [ ] buttons to select the preset station.
Automatic Tuning 2 : Press the STOP ( @ ) button to select MANUAL and then press and 
hold the [ ] buttons to automatically search the band.
Manual Tuning : Press the STOP ( @ ) button 
to select MANUAL and then press the [ ] buttons to tune in to a lower or higher frequency.
Setting Mono/Stereo
Press the MO/ST button. 
Each time the button is pressed, the sound switches between STEREO and MONO.
In a poor reception area, select MONO for a clear, interference-free broadcast.
1.
2.
~
~
~
1.
2.
~
~
~
~
~
Presetting Stations
Example : Presetting FM 89.10 in the memory 
Press the FUNCTION button to select FM.
Press the TUNING/CH () button to select 
.
Press the TUNER MEMORY button. 
Number flashes on the display.
Press the [ ] buttons to select 
preset number.
You can select between 1 and 15 presets.
Press the TUNER MEMORY button again.
Press the TUNER MEMORY button before 
number disappears from the display.
Number disappears from the display and the 
station is stored in memory.
To preset another station, repeat steps 2 to 5. 
To tune in to a preset station, press the [ ] 
buttons on the remote control to select a channel.
1.
2.
3.
~
4.
~
5.
~
~
6.
~
FUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTEMIC VOL+
MIC VOL-
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCD
TUNER MEMORY
DIMMERS . VOLAUDIO UPSCALE
P .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9
RDS DISPLAY
ECHO
FUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTEMIC VOL+
MIC VOL-
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCD
TUNER MEMORY
DIMMERS . VOLAUDIO UPSCALE
P .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9
RDS DISPLAY
ECHO
Connecting microphone
You can enjoy the feeling of a karaoke bar in the comfort of your home.
Watch the video and sing along the lyrics displayed on the TV screen against the accompaniment.
Connect the microphone to the MIC jack on 
the front panel. 
Press the ECHO button to adjust 
the echo level of the microphone. 
 
Press the MIC VOL button to 
adjust the voice volume of the 
microphone.
1.
2.
3.
FUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTEMIC VOL+
MIC VOL-
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCDTUNER MEMORY
DIMMERS . VOLAUDIO UPSCALEP .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9
RDS DISPLAY
ECHO
FUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTEMIC VOL+
MIC VOL-
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCDTUNER MEMORY
DIMMERS . VOLAUDIO UPSCALEP .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9
RDS DISPLAY
ECHO