Samsung Ht C455 User Manual

10 English
English 11

01
Getting Started

Description
Front Panel
1DISC TRAYInsert disc here.
2DISPLAYDisplays the playing status, time, etc.
3REMOTE CONTROL SENSORDetects signals from the remote control.
4OPEN/CLOSE BUTTON (  )Opens and closes the disc tray.
5FUNCTION BUTTON (  )The mode switches as follows : DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM.
6TUNING DOWN & SKIP BUTTON (  )Goes back to the previous title/chapter/track.Tunes down the FM frequency band.
7STOP BUTTON (  )Stops disc playback.
8PLAY/PAUSE...

1 English

Getting Started

English 1

15.1 CHANNEL SPEAKER OUTPUT
CONNECTORSConnect the front, Centre,surround speakers and subwoofer.
2EXTERNAL DIGITAL OPTICAL IN JACK
(DIGITAL AUDIO IN)Use this to connect external equipment capable of digital output.
3HDMI OUT JACKUsing an HDMI cable, connect this HDMI output jack to the HDMI input jack on your TV for the best quality picture.
4AUX IN JACKSConnect to the 2CH Analogue output of an external device (such as a VCR).
5VIDEO OUT JACKConnect your...

1 English
English 1

01
Getting Started

r emote control
Tour of the Remote Control
FUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTE
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCDTUNER MEMORY
DIMMERS . VOLAUDIO UPSCALEP .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9
ECHO
MIC VOL+
MIC VOL-
To open and close the disc tray.
Turn the product on and off.
If you want to change to Home Cinema or TV mode on the remote control, check this button's LED colour.Home Cinema:...

1 English

Getting Started
English 1
Installing batteries in the Remote 
Control
NOTE
Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–).Always replace both batteries at the same time.Do not expose the batteries to heat or flame.The remote control can be used up to approximately 7 meters in a straight line.
Setting the Remote Control
You can control certain functions of your TV with this remote control.
When operating a TV with the remote control
Press...

1 English
English 1

02
Connections
This section involves various methods of connecting the product to other external  components. 
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Front Speakers ei
Place these speakers in front of your listening position, facing inwards (about 45°) toward you. Place the speakers so that their tweeters will be at the same height as your ear. Align the front face of the front speakers...

1 English

Connections

English 1

(L)(R)(L)(R)
FRONTREARCENTRESUBWOOFER
Speaker Components
FRONT
(L)(R)
REAR
(L)(R)
CENTRESTAND
STANDBASESUBWOOFERSPEAKERCABLE
HT-C453N
HT-C450N
FRONT
(L)(R)
STAND
STANDBASE
SPEAKERCABLE
REAR
(L)(R)
Assembled Speakers


SPEAKERCABLE
NOTE
Refer to page 17 to install the Speakers on the Tallboy Stand.
✎
`
HT-C453N
HT-C455NHT-C455N
Connecting the Speakers
Speaker Components
CENTRE SPEAKER
REAR SPEAKERSUBWOOFER FRONT SPEAKER
FRONT/REAR...

1 English
English 1

02
Connections
Installing the Speakers on the Tallboy Stand
4
Connections
4
2
4
2
Stand
Stand Base
1
3
Stand
Speaker
Connecting The Speakers
Press down the terminal tab on the back of the speaker. 
Insert the black wire into the black terminal (–) and the red wire into the red terminal (+), and then release the tab.
Connect the connecting plugs to the back of the product by matching the colours of the speaker plugs to the speaker jacks.
1.
2.
3.BlackRed
In case of...

1 English

Connections

English 1

Connecting the video out to your tv
Choose one of the three methods for connecting to a TV.
METHOD 1 : HDMI
Connect an HDMI cable (Option) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the COMPONENT OUT (Pr, Pb and Y) jacks on the back of the product to the Component Video Input jacks on...

1 English
English 1

02
Connections
NOTE
Resolutions available for the HDMI output are 480p(576p), 720p,1080i/1080p. See page 23 for the resolution setting. This product operates in Interlace scan mode 480i(576i) for component/composite output.After making the video connection, set the Video input source on your TV to match the corresponding Video output mode on your product.  
See your TV owner's manual for more information on how to select the TV's Video Input source.Turn this...

0 English

Connections

English 1

Connecting the fm Antenna
Connect the FM antenna supplied to the FM Antenna jack.
Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a wall or other rigid surface.
NOTE
  This product does not receive AM broadcasts.
1.
2.
✎
`
FM Antenna (supplied)
DIGITALAUDIO INOPTICALHDMI OUT
AUX INCOMPONENTOUT
VIDEOOUT
HDMI OUT
COMPONENTOUTAUX IN
VIDEOOUTFM ANT.