Samsung Ht C450 User Manual

							
10 English
English 11

01
Getting Started

Description
Front Panel
1DISC TRAYInsert disc here.
2DISPLAYDisplays the playing status, time, etc.
3REMOTE CONTROL SENSORDetects signals from the remote control.
4OPEN/CLOSE BUTTON (  )Opens and closes the disc tray.
5FUNCTION BUTTON (  )The mode switches as follows : DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM.
6TUNING DOWN & SKIP BUTTON (  )Goes back to the previous title/chapter/track.Tunes down the FM frequency band.
7STOP BUTTON (  )Stops disc playback.
8PLAY/PAUSE BUTTON (  )Plays a disc or pauses playback.
9TUNING UP & SKIP BUTTON (  )Goes to the next title/chapter/track.Tunes up the FM frequency band.
10VOLUME CONTROL BUTTON ( ,  )Volume adjustment.
11POWER BUTTON (  )Turns the product on and off. 
12USB PORTConnect here and play fi les from external USB storage devices such as MP3 players, USB fl ash memory, etc.
MIC 1,2  jackConnect up to two microphones.
MIC 2MIC 1
MIC 2MIC 1
124567910831112
13
13
 
						

							
1 English

Getting Started

English 1

15.1 CHANNEL SPEAKER OUTPUT
CONNECTORSConnect the front, Centre,surround speakers and subwoofer.
2EXTERNAL DIGITAL OPTICAL IN JACK
(DIGITAL AUDIO IN)Use this to connect external equipment capable of digital output.
3HDMI OUT JACKUsing an HDMI cable, connect this HDMI output jack to the HDMI input jack on your TV for the best quality picture.
4AUX IN JACKSConnect to the 2CH Analogue output of an external device (such as a VCR).
5VIDEO OUT JACKConnect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack.
6COMPONENT VIDEO OUTPUT JACKSConnect a TV with Component video inputs to these jacks.
7FM ANTENA JACKConnect the FM antenna.
Rear Panel
DIGITALAUDIO INOPTICALHDMI OUT
AUX INCOMPONENTOUT
VIDEOOUTFM ANT.
1235674
 
						

							
1 English
English 1

01
Getting Started

remote control
Tour of the Remote Control
FUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTE
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCDTUNER MEMORY
DIMMERS . VOLAUDIO UPSCALEP .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9
ECHO
MIC VOL+
MIC VOL-
To open and close the disc tray.
Turn the product on and off.
Press to select DVD RECEIVER/TV mode. 
Press the number button to operate options.
Select the desired DSP/EQ audio mode.
This is mode selection button.orPress to select TV's video mode.
Press to search backwardsor forwards.Press to skip backwards or forwards.
Press to pause a disc.Press to stop/play a disc.
Adjust the volume.
Cut off the sound temporarily.
Press to check the disc menu.
Press this to move to the homemenu.
Select on-screen menu items and change menu value.
Return to the previous menu.
Allow access to common functionsof the product such as the Photo List.orGREEN(B) : Press to preset FM stations.
Select the desired Dolby Pro Logic II audio mode.
Allows you to repeat a title, chapter, track or disc.
Use this to enter the Title menu.
Exit the menu.
Adjust the brightness of Display.
Used to change the audio/subtitle language, angle etc.
Allow access to common functionsof the product such as the Photo List.or
YELLOW(C) :  Select MONO or STEREO for radio broadcasting.
BLUE(D) :    Converts audio sound of the 
CD into a MP3 file format.
Display current disc (file) status.
Select the desired P.BASS or MP3 ENHANCEMENT mode.
Regulate and stabilize thevolume level against adrastic volume change.
SLEEP : Set the time to shut off the product itself.
ECHO :  Adjust the echo level of the microphone. 
TUNING/CH:  Search for active FM stations and change channels.
MIC VOL :  Adjust the MIC volume.
 
						

							
1 English

Getting Started
English 1
Installing batteries in the Remote 
Control
NOTE
Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–).Always replace both batteries at the same time.Do not expose the batteries to heat or flame.The remote control can be used up to approximately 7 meters in a straight line.
Setting the Remote Control
You can control certain functions of your TV with this remote control.
When operating a TV with the remote control
Press the DVD RECEIVER/TV button to set the 
remote control to TV mode.  
Press the POWER button to turn on the TV.
While holding down the POWER button, enter the code corresponding to your brand of TV.
If there is more than one code listed for your TV in the table, enter one at a time to determine which code works.
Example : For a Samsung TV While holding down the POWER button, use the number buttons to enter 00, 15, 16, 17 and 40.
 
If the TV turns off, the setting is complete.
You can use the TV POWER, VOLUME, CHANNEL, and Numeric buttons (0~9).
NOTE
The remote control may not work or some operations may not be possible with some brands of TVs.The remote control will work on a Samsung TV by default.  
✎
`
```
1.
2.
3.
~
~
4.
~
✎
`
`
TV Brand Code List
BrandCodeBrandCodeAdmiral (M.Wards)56, 57, 58MTC18
A Mark01, 15NEC18, 19, 20, 40, 59, 60
Anam01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14Nikei03
AOC01, 18, 40, 48Onking03Bell & Howell (M.Wards)57, 58, 81Onwa03
Brocsonic59, 60Panasonic06, 07, 08, 09, 54, 66, 67, 73, 74Candle18Penney18
Cetronic03Philco03, 15, 17, 18, 48, 54, 59, 62, 69, 90Citizen03, 18, 25Philips15, 17, 18, 40, 48, 54, 62, 72Cinema97Pioneer63, 66, 80, 91Classic03Portland15, 18, 59Concerto18Proton40Contec46Quasar06, 66, 67Coronado15Radio Shack17, 48, 56, 60, 61, 75
Craig03, 05, 61, 82, 83, 84RCA/Proscan18, 59, 67, 76, 77, 78, 92, 93, 94Croslex62Realistic03, 19Crown03Sampo40
Curtis Mates59, 61, 63Samsung00, 15, 16, 17, 40, 43, 46, 47, 48, 49,CXC03Sanyo19, 61, 65
Daewoo02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,  25, 26, 27, 28, 29, 30, 32, 34, 35, 36, 48, 59, 90Scott03, 40, 60, 61
Daytron40Sears15, 18, 19Dynasty03Sharp15, 57, 64
Emerson03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85Signature 2000 (M.Wards)57, 58
Fisher19, 65Sony50, 51, 52, 53, 55Funai03Soundesign03, 40Futuretech03Spectricon01General Electric (GE)06, 40, 56, 59, 66, 67, 68SSS18
Hall Mark40Sylvania18, 40, 48, 54, 59, 60, 62Hitachi15, 18, 50, 59, 69Symphonic61, 95, 96Inkel45Tatung06JC Penny56, 59, 67, 86Techwood18JVC70Teknika03, 15, 18, 25KTV59, 61, 87, 88TMK18, 40KEC03, 15, 40Toshiba19, 57, 63, 71KMC15Vidtech18
LG (Goldstar)01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44Videch59, 60, 69
Luxman18Wards15, 17, 18, 40, 48, 54, 60, 64LXI (Sears)19, 54, 56, 59, 60, 62, 63, 65, 71Yamaha18
Magnavox15, 17, 18, 48, 54, 59, 60, 62, 72, 89York40
Marantz40, 54Yupiteru03Matsui54Zenith58, 79MGA18, 40Zonda01Mitsubishi/MGA18, 40, 59, 60, 75Dongyang03, 54
* Battery size: AAA
 
						

							
1 English
English 1

02
Connections
This section involves various methods of connecting the product to other external components. 
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Front Speakers ei
Place these speakers in front of your listening position, facing inwards (about 45°) toward you. Place the speakers so that their tweeters will be at the same height as your ear. Align the front face of the front speakers with the front face of the centre speaker or place them slightly in front of the centre speakers.
Centre Speaker fIt is best to install it at the same height as the front speakers. You can also install it directly over or under the TV.
Rear Speakershj
Place these speakers to the side of your listening position. If there isn't enough room, place these speakers so they face each other. Place them about 60 to 90cm above your ear, facing slightly downward.
*  
Unlike the front and centre speakers, the rear speakers are used to handle mainly sound effects and sound will not come from them all the time.
Subwoofer gThe position of the subwoofer is not so critical. Place it anywhere you like.
Position of the product
Place it on a stand or cabinet shelf, or under the TV stand.
Selecting the Listening PositionThe listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.  Example :   
For 32" TV's 2~2.4m  
For 55" TV's 3.5~4m  
SW
CAUTION
Do not let children play with or near the speakers. They could get hurt if the speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+ /–) is correct.
   Keep the subwoofer out of the reach of children so as to prevent them from inserting their hands or alien 
substances into the duct (hole) of the subwoofer.
  
Do not hang the subwoofer on the wall through the duct (hole).
NOTE
If you place a speaker near your TV set, screen colour may be distorted because of the magnetic field 
generated by the speaker. If this occurs, place the speaker away from your TV set.
!
`
`
`
`
✎
`
Connections
 
						

							
1 English

Connections

English 1

(L)(R)(L)(R)
FRONTREARCENTRESUBWOOFER
Speaker Components
FRONT
(L)(R)
REAR
(L)(R)
CENTRESTAND
STANDBASESUBWOOFERSPEAKERCABLE
HT-C453
HT-C450
FRONT
(L)(R)
STAND
STANDBASE
SPEAKERCABLE
REAR
(L)(R)
Assembled Speakers


SPEAKERCABLE
NOTE
Refer to page 17 to install the Speakers on the Tallboy Stand.
✎
`
HT-C453
HT-C455HT-C455
Connecting the Speakers
Speaker Components
CENTRE SPEAKER
REAR SPEAKERSUBWOOFER FRONT SPEAKER
FRONT/REAR SPEAKER
CENTRE SPEAKER
SUBWOOFER 
CENTRE
SUBWOOFER
SCREW (Large): 2EA
SCREW (Small): 8EA
SCREW (Large): 4EA
SCREW (Small): 16EA
 
						

							
1 English
English 1

02
Connections

Installing the Speakers on the Tallboy Stand
* HT-C453 only - Front Speakers
* HT-C455 only - Front/Rear Speakers
Turn the Stand Base upside-down and connect 
it to the Stand.
Insert four small screws clockwise into the four holes 
marked using a screwdriver as shown in the 
illustration. 
Connect the upper Speaker to the assembled Stand.
Insert another large screw clockwise into the hole 
on the rear of the speaker using a screwdriver.
1.
2.
3.
4.
4
Connections
4
2
4
2
Stand
Stand Base
1
3
Stand
Speaker
Connecting The Speakers
Press down the terminal tab on the back of the speaker. 
Insert the black wire into the black terminal (–) and the red wire into the red terminal (+), and then release the tab.
Connect the connecting plugs to the back of the product by matching the colours of the speaker plugs to the speaker jacks.
1.
2.
3.BlackRed
In case of HT-C450
DIGITALAUDIO INOPTICAL
FM ANT .HDMI OUT
AUX INCOMPONENTOUT
VIDEOOUT
Front Speaker (R)
Subwoofer
Rear Speaker (R)Rear Speaker (L)
Front Speaker (L)
Centre Speaker
* Refer to page 16 for the speakers of HT-C453/C455.
 
						

							
1 English

Connections

English 1

Connecting the video out to your tv
Choose one of the three methods for connecting to a TV.
METHOD 1 : HDMI
Connect an HDMI cable (Option) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the COMPONENT OUT (Pr, Pb and Y) jacks on the back of the product to the Component Video Input jacks on your TV. 
METHOD 3 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack 
on your TV.
DIGITALAUDIO INOPTICALHDMI OUT
AUX INCOMPONENTOUT
VIDEOOUTFM ANT.
AUX IN
FM ANT.
METHOD 1 (Option)
METHOD 2
Green
Blue
Red
METHOD 3 (Option)
 
						

							
1 English
English 1

02
Connections

NOTE
Resolutions available for the HDMI output are 480p(576p), 720p,1080i/1080p. See page 23 for the resolution setting. This product operates in Interlace scan mode 480i(576i) for component/composite output.After making the video connection, set the Video input source on your TV to match the corresponding Video 
output mode on your product.  See your TV owner's manual for more information on how to select the TV's Video Input source.Turn this product on fi rst before you set the video input source on your TV. See your TV owner's manual for more information on how to select the TV's Video Input source.
CAUTION
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the television.
HDMI FUNCTION
HDMI Auto Detection Function
The product's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on.
HDMI (High Definition Multimedia Interface)
HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.
HDMI connection description
    - HDMI outputs only a pure digital signal to the TV.
    -  If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.
What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made.
 NOTE
When a HDMI cable is connected, composite(Video) and component video signals are not output.
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable. This is only available with SAMSUNG TV's that support Anynet+.
Connect the the product to a Samsung TV with an HDMI cable. (See page 18)
Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
NOTE
The Anynet+ function supports some buttons of the remote control.
This function is not available if an HDMI cable does not support CEC.
Depending on your TV, certain HDMI output resolutions may not work. 
✎
`
``
`
!
`
~
~
~
~
~
✎
`
1.
2.
✎
`
`
`
DownloadedFromTheatreSystem-Manual.comManuals 
						

							
0 English

Connections

English 1

Connecting the fm Antenna
Connect the FM antenna supplied to the FM Antenna jack.
Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a wall or other rigid surface.
NOTE
  This product does not receive AM broadcasts.
1.
2.
✎
`
DIGITALAUDIO INOPTICALHDMI OUT
AUX INCOMPONENTOUT
VIDEOOUT
HDMI OUT
COMPONENTOUTAUX IN
VIDEOOUTFM ANT.
FM Antenna (supplied)