Samsung Ht C350 User Manual

							10 EnglishEnglish 11
01 Getting Started
Description
Front Panel
1DISC TRAYInsert disc here.
2DISPLAYDisplays the playing status, time, etc.
3REMOTE CONTROL SENSORDetects signals from the remote control.
4OPEN/CLOSE BUTTON (  )Opens and closes the disc tray.
5FUNCTION BUTTON (  )The mode switches as follows : 
DVD/CD ➞ D.IN  ➞ AUX  ➞ USB  ➞ FM.
6TUNING DOWN & SKIP BUTTON (  )Goes back to the previous title/chapter/track.
Tunes down the FM frequency band.
7STOP BUTTON (  )Stops disc playback.
8PLAY/PAUSE BUTTON (  )Plays a disc or pauses playback.
9TUNING UP & SKIP BUTTON (  )Goes to the next title/chapter/track.
Tunes up the FM frequency band.
10VOLUME CONTROL BUTTON ( ,  ) Volume adjustment.
11POWER BUTTON (  )Turns the product on and off. 
12USB PORTConnect here and play fi les from external USB storage devices such as 
MP3 players, USB fl ash memory, etc.
MIC 1,2  jack
Connect up to two microphones.
MIC 2
MIC 1
MIC 2
MIC 1
124567910831112
13
13
 
						

							1 English
Getting Started
English 1
15.1 CHANNEL SPEAKER OUTPUT
CONNECTORSConnect the front, Centre,surround speakers and subwoofer.
2EXTERNAL DIGITAL OPTICAL IN JACK
(DIGITAL AUDIO IN)Use this to connect external equipment capable of digital output.
3HDMI OUT JACKUsing an HDMI cable, connect this HDMI output jack to the HDMI input jack 
on your TV for the best quality picture.
4AUX IN JACKSConnect to the 2CH Analogue output of an external device (such as a VCR).
5VIDEO OUT JACKConnect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack.
6COMPONENT VIDEO OUTPUT JACKS
Connect a TV with Component video inputs to these jacks.
7FM ANTENA JACKConnect the FM antenna.
Rear Panel
DIGITAL
AUDIO IN
OPTICALHDMI OUT
AUX INCOMPONENT
OUT
VIDEOOUTFM ANT.
1235674
 
						

							1 EnglishEnglish 1
01 Getting Started
remote control
Tour of the Remote Control
1 2 3
4 5 6
7 80 9
DISC MENU
TITLE
DSP / EQ
A B C D
MO / ST
REPEAT CD RIPPING DIMMER
I N F O
VOL
ECHO            MIC VOL      +
VOL
TV CH V
TUNING V
DVD RECEIVER SELECT
SAMSUNG TV
MUTE
POWER
P L
TOOLS
FUNCTION
TV SOURCE
TUNER
MEMORY
Turn the product on and off.
Allow access to common functions of 
the product such as the Photo List.
Press this to move to the home menu.
Press numeric button to operate options.
or
0. ECHO :    Adjust the echo level of the 
microphone.
1. PLII 
button :   
Select the desired Dolby Pro 
Logic II audio mode,P.Bass or 
MP3 enhancement function
2. DSP/EQ 

button :    Select the desired DSP/
EQ audio mode.
3. MO/ST 

button :    Press to listen in Mono/
Stereo in the FM mode
Adjust the volume down.
Adjust the volume up.
Press to stop/play a disc.
Press to skip backwards. /Change channels down.
Press to skip forwards /Change channels up.
Select on-screen menu items and  change menu value.
Used to change the audio/subtitle 
language, angle etc.
Press to select the DVD receiver mode.Press to select TV. Exit the menu.
Return to the previous menu.
Press to check the disc/title menu.
This is mode selection button.
or
Press to select TV's video mode. 
Press to preset FM stations.
Press to pause a disc.
Press numeric button to operate options.
or
4. REPEAT button : Allows you to repeat a  title, chapter, track or disc.
5. CD RIPPING button : Press to rip a CD. 6. DIMMER button : Adjust the brightness  of Display.
7. INFO button 
8,9. MIC -,+ button : Adjust the MIC volume. 
Cut off the sound temporarily.
Press to search backwards or forwards.
Installing batteries in the Remote Control
NOTE
Place batteries in the remote control so they match the 
polarity : (+) to (+) and (–) to (–).
Always replace both batteries at the same time.
Do not expose the batteries to heat or flame.
The remote control can be used up to approximately 7 
meters in a straight line.
✎
`
`
`
`
* Battery size: AAA
 
						

							1 English
Getting Started
English 1
Setting the Remote Control
You can control certain functions of your TV with this 
remote control.
When operating a TV with the remote controlPress the  TV button to set the remote control to 
T V

 mode.  
Press the  POWER button to turn on the TV.
While holding down the  POWER button, enter 
the code corresponding to your brand of TV.
If there is more than one code listed for your 
TV in the table, enter one at a time to 
determine which code works.
Example : For a Samsung TV 
While holding down the  POWER button, use the 
number buttons to enter 00, 15, 16, 17 and 40.
  If the TV turns off, the setting is complete.
You can use the TV POWER, VOLUME, 
CHANNEL, and Numeric buttons (0~9).
NOTE
The remote control may not work or some operations 
may not be possible with some brands of TVs.
The remote control will work on a Samsung TV by 
default.
1.
2.
3.
~
~
4. ~
✎
`
`
TV Brand Code List
Brand Code Brand CodeAdmiral 
(M.Wards) 56, 57, 58
MTC
18
A Mark 01, 15 NEC
18, 19, 20, 40, 59, 60
Anam 01, 02, 03, 04, 05, 06, 
07, 08, 09, 10, 11,  12, 13, 14 Nikei
03
AOC 01, 18, 40, 48 Onking
03
Bell & Howell 
(M.Wards)57, 58, 81 Onwa
03
Brocsonic 59, 60Panasonic06, 07, 08, 09, 54, 66, 
67, 73, 74
Candle 18Penney
18
Cetronic 03Philco03, 15, 17, 18, 48, 54, 
59, 62, 69, 90
Citizen 03, 18, 25 Philips15, 17, 18, 40, 48, 
54, 62, 72
Cinema 97Pioneer
63, 66, 80, 91
Classic 03Portland
15, 18, 59
Concerto 18Proton
40
Contec 46Quasar
06, 66, 67
Coronado 15Radio Shack
17, 48, 56, 60, 61, 75
Craig 03, 05, 61, 82, 83, 84 RCA/
Proscan
18, 59, 67, 76, 77, 78,  92, 93, 94
Croslex 62Realistic
03, 19
Crown 03Sampo
40
Curtis Mates 59, 61, 63Samsung
00, 15, 16, 17, 40, 43, 46, 
47, 48, 49,
CXC 03Sanyo
19, 61, 65
Daewoo02, 03, 04, 15, 16, 17, 18, 
19, 20, 21, 22, 23, 24,  25,  26, 27, 28, 29, 30, 32, 34,  35, 36, 48, 59, 90Scott 03, 40, 60, 61
Daytron 40Sears
15, 18, 19
Dynasty 03Sharp
15, 57, 64
Emerson 03, 15, 40, 46, 59, 61, 
64, 82, 83, 84, 85 Signature 
2000 
(M.Wards) 57, 58
Fisher 19, 65 Sony
50, 51, 52, 53, 55
Funai 03Soundesign
03, 40
Futuretech 03Spectricon
01
General 
Electric (GE)06, 40, 56, 59, 66,  67, 68 SSS
18
Hall Mark 40Sylvania18, 40, 48, 54, 59, 
60, 62
Hitachi 15, 18, 50, 59, 69 Symphonic
61, 95, 96
Inkel 45Tatung
06
JC Penny 56, 59, 67, 86 Techwood
18
JVC 70Teknika
03, 15, 18, 25
KTV 59, 61, 87, 88 TMK
18, 40
KEC 03, 15, 40 Toshiba
19, 57, 63, 71
KMC 15Vidtech
18
LG (Goldstar) 01, 15, 16, 17, 37, 38, 
39, 40, 41, 42, 43, 44 Videch
59, 60, 69
Luxman 18Wards15, 17, 18, 40, 48, 
54, 60, 64
LXI (Sears) 19, 54, 56, 59, 60, 62, 
63, 65, 71 Yamaha
18
Magnavox 15, 17, 18, 48, 54, 59, 
60, 62, 72, 89 York
40
Marantz 40, 54Yupiteru
03
Matsui 54Zenith
58, 79
MGA 18, 40 Zonda
01
Mitsubishi/ MGA 18, 40, 59, 60, 75
Dongyang
03, 54
 
						

							1 EnglishEnglish 1
02 Connections
This section involves various methods of connecting the product to other external components. 
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Front Speakers ei
Place these speakers in front of your listening position, facing inwards (about 45°) 
toward you. Place the speakers so that their tweeters will be at the same height 
as your ear. Align the front face of the front speakers with the front face of the 
centre speaker or place them slightly in front of the centre speakers.
Centre Speaker fIt is best to install it at the same height as the front speakers. You can also install it 
directly over or under the TV.
Rear Speakers
hj
Place these speakers to the side of your listening position. If there isn't enough 
room, place these speakers so they face each other. Place them about 60 to 
90cm above your ear, facing slightly downward.
*    Unlike the front and centre speakers, the rear speakers are used to handle 
mainly sound effects and sound will not come from them all the time.
Subwoofer 
gThe position of the subwoofer is not so critical. Place it anywhere you like.
Position of the product
Place it on a stand or cabinet shelf, or under the 
TV stand.
Selecting the Listening PositionThe listening position should be located about 2.5 
to 3 times the distance of the TV's screen size 
away from the TV. 
 Example :    For 32" TV's 2~2.4m   
For 55" 
TV's 3.5~4m   
SW
CAUTION
Do not let children play with or near the speakers. They could get hurt if the speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+ /–) is correct.
   Keep the subwoofer out of the reach of children so as to prevent them from inserting their hands or alien 
substances into the duct (hole) of the subwoofer.
   Do not hang the subwoofer on the wall through the duct (hole).
NOTE
If you place a speaker near your TV set, screen colour may be distorted because of the magnetic field 
generated by the speaker. If this occurs, place the speaker away from your TV set.
!
`
`
`
`
✎
`
Connections
 
						

							1 English
Connections
English 1
(L) (R)
(L) (R)
FRONT REAR CENTRE
SUBWOOFER
SPEAKERCABLE
Connecting the Speakers
Speaker Components
Connecting The Speakers
Press down the terminal tab on the back of the speaker. 
Insert the black wire into the black terminal (–) and the red wire into the red 
terminal (+), and then release the tab.
Connect the connecting plugs to the back of the product by matching the 
colours of the speaker plugs to the speaker jacks.
1.
2.
3.
BlackRed
 HT-C350
DIGITAL
AUDIO IN
OPTICALFM ANT .
HDMI OUT
AUX INCOMPONENT
OUTVIDEOOUT
Front Speaker (R)
Subwoofer
Rear Speaker (R)
Rear Speaker (L)
Front Speaker (L)
Centre Speaker
 
						

							1 EnglishEnglish 1
02 Connections
Connecting the video out to your tv
Choose one of the three methods for connecting to a TV.
METHOD 1 : HDMI
Connect an HDMI cable (Option) from the HDMI OUT jack on the back of the product to the HDMI IN jack on 
your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) 
from the  COMPONENT OUT  (Pr, Pb and Y) jacks on the back of the product to the Component Video Input 
jacks on your TV. 
METHOD 3 : Composite Video
Connect the supplied Video cable(supplied)  from the V IDEO OUT jack on the back of the product to the
VIDEO IN jack on your TV.
HDMI OUT
AUX INCOMPONENT
OUT
VIDEOOUTFM ANT.
AUX IN
FM ANT.
METHOD 1 (Option) METHOD 2
METHOD 3 (Supplied)
Green
Blue
Red
 
						

							1 English
Connections
English 1
NOTE
Resolutions available for the HDMI output are 480p(576p), 720p,1080i/1080p. See page 22 for the resolution 
setting. 
This product operates in Interlace scan mode 480i(576i) for component/composite output.
After making the video connection, set the Video input source on your TV to match the corresponding Video 
output mode on your product. 
See your TV owner's manual for more information on how to select the TV's Video Input source.
Turn this product on fi rst before you set the video input source on your TV. See your TV owner's manual for
more information on how to select the TV's Video Input source.
CAUTION
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright 
protection systems and the picture will be distorted on the television.
HDMI FUNCTION
HDMI Auto Detection Function
The product's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on.
HDMI (High Defi nition Multimedia Interface)
HDMI is an interface that enables the digital transmission of video and audio data with just a single 
connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture 
on a TV having an HDMI input jack.
HDMI connection description
    - HDMI outputs only a pure digital signal to the TV.
    -  If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears 
on the screen.
What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via 
HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a 
display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized 
copies from being made.
 NOTE
When a HDMI cable is connected, composite(Video) and component video signals are not output.
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote 
control. Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable. This is 
only available with SAMSUNG TV's that support Anynet+.
Connect the the product to a Samsung TV with an HDMI cable. (See page 17)
Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
NOTE
The Anynet+ function supports some buttons of the remote control.
This function is not available if an HDMI cable does not support CEC.
Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the user’s manual of your TV.
Please check the
 logo (If your TV has an logo, then it supports Anynet+ function.)
✎
`
`
`
`
!
`
~
~
~
~
~
✎
`
1.
2.
✎
`
`
`
`
DownloadedFromTheatreSystem-Manual.comManuals 
						

							1 EnglishEnglish 1
02 Connections
Connecting the fm Antenna
Connect the FM antenna supplied to the FM Antenna jack.
Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a 
wall or other rigid surface.
NOTE
  This product does not receive AM broadcasts.
1.
2.
✎
`
DIGITAL
AUDIO IN
OPTICALHDMI OUT
AUX INCOMPONENT
OUT
VIDEOOUT
HDMI OUT
COMPONENTOUTAUX IN
VIDEOOUTFM ANT.
FM Antenna (supplied)
 
						

							0 English
Connections
English 1
Connecting Audio from external Components
AUX : Connecting an External Analogue Component
Analogue signal components such as a VCR.Connect  AUX IN (Audio) on the back of the product to the Audio Out of the external Analogue 
component. 
Be sure to match the colours of the connecting jacks.
Press the  FUNCTION  button to select  AUX input. 
The mode switches as follows : 
DVD/CD  ➞ D.IN  ➞ AUX  ➞ USB  ➞ FM.
   NOTE
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the 
VCR to this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the  DIGITAL AUDIO IN  (OPTICAL ) on the back of the product to the Digital Output of the 
external digital component.
Press the  FUNCTION  button to select  D.IN.
The mode switches as follows : 
DVD/CD  ➞ D.IN  ➞ AUX  ➞ USB  ➞ FM.
1.
~
2. ~
✎
`
1.
2.~
DIGITAL
AUDIO IN
OPTICALHDMI OUT
AUX INCOMPONENT
OUT
VIDEOOUTFM ANT.
HDMI OUT
COMPONENTOUT
VIDEOOUTFM ANT.
Optical Cable
(not supplied)
Audio Cable (not supplied)
If the external analogue 
component has only one Audio 
Out, connect either left or right.
Set-Top Box VCR
AUX
OPTICAL
White
Red