Samsung Ht Bd1255 User Manual

							51
ENG
●  NETWORK SETUP
Network setup
SETTING UP THE NETWORK SETUP OPTIONS
To obtain information on the proper settings, check the network settings on your computer or contact 
your Internet provider.
To set the network of your Blu-ray Home Theater, follow the steps below.
With the unit in Stop mode/No Disc mode, press the 
MENU button.
Press the 
▲▼◄► buttons to select Setup, then press 
the ENTER or 
► button.
Press the 
▲▼ buttons to select Network, then press the 
ENTER or 
► button.
Press the 
▲▼ buttons to select the desired network 
option from the options described below, then press the 
ENTER or 
► button.
Press the 
▲▼ buttons to select the desired item, then press the ENTER button.
Each network option is described in detail below.
Network Selection 
Select Cable or Wireless as the method to connect to 
network.
To setup, follow steps 1~3 above.
Press the 
▲▼ buttons to select Network Selection, then 
press the ENTER or 
► button.
Cable : Select this to connect to the network using a 
cable. (see page 30)
Wireless : Select this to connect to the network 
wirelessly. (see page 31)
Cable Network
To setup, follow steps 1~3 above.
Press the 
▲▼ buttons to select Cable Network, then 
press the ENTER or 
► button.
Press the 
▲▼ buttons to select DHCP, then press the 
ENTER button.
If DHCP is set to On, you can't select IP Address, 
Subnet Mask or Gateway.
If DNS is set to Auto, you can’t select Primary/ 
Secondary DNS. 1.
2.
3.
4.
5.
4.
•
•
4.
5.M

 
DVDDVD
Audio
Display       HDMI         Network               ◄   Parental     
 Music  Photo   
                             
            Setup 
Audio
Display       HDMI         Network               ◄   Parental     DVDDVDNetwork Selection :  Cable            ►Cable Network
Wireless Network
Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE  
Connection :  Allow (Valid Only)
 Music  Photo   
                             
            Setup 
Audio
Display       HDMI         Network               ◄   Parental     DVDDVDNetwork Selection :  Cable Cable Network                                           ►Wireless Network
Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE  
Connection :  Allow (Valid Only)
 Music  Photo   
                             
            Setup 
Audio
Display       HDMI         Network               ◄   Parental     DVDDVDNetwork Selection :  Cable Cable Network                                           ►Wireless Network
Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE  
Connection :  Allow (Valid Only)
 Music  Photo   
                             
            Setup Display Setup      HDMI Setup        Network Setup    ◄   Parental Setup    ◄
Cable Network
   Select  Return
DHCP :   On
IP Address  :  000 . 000 . 000 . 000 
Subnet Mask  :  255 . 255 . 255 . 000 
Gateway  :  000 . 000 . 000 . 000
DNS : Auto
Primary DNS  :  000 . 000 . 000 . 000 
Secondary DNS  :  000 . 000 . 000 . 000 
SaveCancel
HT-BD1250A_XAC_0715-2.indd   51HT-BD1250A_XAC_0715-2.indd   512009-07-15    10:13:132009-07-15    10:13:13
 
						

							Network setup
52
SETTING UP THE NETWORK SETUP OPTIONS
Press the ▲▼ buttons to select a desired item, then 
press the ENTER button.
If DHCP is set to Off and, DNS to Manual, enter 
your IP Address, Subnet Mask, Gateway and 
Primary DNS settings (Secondary DNS is optional).
If DHCP is set to On and, DNS to Manual, enter 
your Primary DNS setting (Secondary DNS is 
optional).
If DHCP is set to On and, DNS to Auto, you don’t 
need further or additional settings. 
When you select an item, use the number 
and ▲▼◄ ► buttons.
If the automatic settings don’t work, contact 
your ISP.
When done, use the ▲▼ buttons to select Save, then press the ENTER button.
If you don’t want to save your work, use the 
▲▼◄ ► buttons to select Cancel, then press the 
ENTER button.
The IP address used in this manual is for illustrative purposes only. You must refer to your 
network settings for the actual IP address.
To obtain settings for IP address, Subnet mask, Gateway and Primary DNS, check the 
network settings in your computer or contact your internet service provider.
Wireless Network
To setup, follow steps 1~3 on page 51.
Press the 
▲▼ buttons to select Wireless Network, 
then press the ENTER or 
► button.
6.
•
•
•
M

7.
8.
M

4.
Setup available
 Music  Photo   
                             
            Setup Audio
Display       HDMI         Network               ◄   Parental     
Network Selection :  Cable 
Cable Network                                     ►Wireless Network
Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
Connection◄DVDDVD
Cable Network
   Select  Return
DHCP :   Off
IP Address  :  000 . 000 . 000 . 000 
Subnet Mask  :  255 . 255 . 255 . 000 
Gateway  :  000 . 000 . 000 . 000
DNS : Manual
Primary DNS  :   000 . 000 . 000 . 000 
Secondary DNS  :   000 . 000 . 000 . 000 
YesNo
Setup not availableSetup available
 Music  Photo   
                             
            Setup Audio
Display       HDMI         Network               ◄   Parental     
Network Selection :  Cable 
Cable Network                                     ►Wireless Network
Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
Connection◄DVDDVD
Cable Network
   Select  Return
DHCP :   On
IP Address  :  000 . 000 . 000 . 000 
Subnet Mask  :  255 . 255 . 255 . 000 
Gateway  :  000 . 000 . 000 . 000
DNS : Manual
Primary DNS  :   000 . 000 . 000 . 000 
Secondary DNS  :   000 . 000 . 000 . 000 
YesNo
Setup not available
 Music  Photo   
                             
            Setup Audio
Display       HDMI         Network               ◄   Parental     
Network Selection :  Cable 
Cable Network                                     ►Wireless Network
Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
Connection◄DVDDVD
Cable Network
   Select  Return
DHCP :   On
IP Address  :  000 . 000 . 000 . 000 
Subnet Mask  :  255 . 255 . 255 . 000 
Gateway  :  000 . 000 . 000 . 000
DNS : Auto
Primary DNS  :   000 . 000 . 000 . 000 
Secondary DNS  :   000 . 000 . 000 . 000 
YesNo
Audio
Display       HDMI         Network               ◄   Parental     
Network Selection : Wireless 
Cable Network                                     
Wireless Network                                
►Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
ConnectionDVDDVD
 Music  Photo   
                             
            Setup 
HT-BD1250A_XAC_0715-2.indd   52HT-BD1250A_XAC_0715-2.indd   522009-07-15    10:13:172009-07-15    10:13:17
 
						

							53
ENG
●  NETWORK SETUP
Press the ▲▼ buttons to select DHCP, then press the 
ENTER button.
If DHCP is set to On, you can't select IP Address, 
Subnet Mask or Gateway.
If DNS is set to Auto, you can’t select Primary/ 
Secondary DNS.
Press the ▲▼ buttons to select a desired item, then press 
the ENTER button.
Select an Access Point, and then press the ENTER 
button to display available list of APs.
(It may take several seconds to search.)
-  When you select an AP and press the ENTER button, it 
tries to connect to the designated AP.
-  If successful, a notifi cation appears.
(If selected AP shows a Lock icon, you may need to
provide security authentication.) 
-  Select your appropriate Security Access Point if it is
 known. If it is not, select WEP, WPAPSK or WPA2PSK
from the list below and enter in the password. Keep trying 
each Security Access Point and enter the Password until 
a connection is made.
- Enter in the Password then press the BLUE (D) 
   button to connect to your access point (Router).
For further details on AP security, refer to the AP’s (Router) 
user manual.
If DHCP is set to Off and, DNS to Manual, enter your IP 
Address, Subnet Mask, Gateway and DNS Server.
5.
M

6.
•
•
Audio
Display       HDMI         Network               ◄   Parental     
Network Selection : Wireless 
Cable Network                                     
Wireless Network                                
►Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
ConnectionDVDDVD
 Music  Photo   
                             
            Setup 
◄
Wireless Network
   Select  Return
Access Point : Not SelectedDHCP : On 
IP Address  :  000 . 000 . 000 . 000 
Subnet Mask  :  255 . 255 . 255 . 000 
Gateway :  000 . 000 . 000 . 000
DNS : Auto
DNS Server  :  000 . 000 . 000 . 000
SaveCancel
Audio
Display       HDMI         Network               ◄   Parental     
Network Selection : Wireless 
Cable Network                                     
Wireless Network                                
►Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
ConnectionDVDDVD
 Music  Photo   
                             
            Setup 
◄
Wireless Network
   Select  Return
Access Point  :  Not Selected
DHCP : On 
IP Address  :  000 . 000 . 000 . 000 
Subnet Mask  :  255 . 255 . 255 . 000 
Gateway :  000 . 000 . 000 . 000
DNS : Auto
DNS Server  :  000 . 000 . 000 . 000
SaveCancel
Audio
Display       HDMI         Network               ◄   Parental     
Network Selection : Wireless 
Cable Network                                     
Wireless Network                                
►Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
ConnectionDVDDVD
 Music  Photo   
                             
            Setup 
◄
Access Point – Security
   Select  Return
OPEN
WEP
WPAPSK
WPA2PSK
123
Audio
Display       HDMI         Network               ◄   Parental     
Network Selection : Wireless 
Cable Network                                     
Wireless Network                                
►Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
ConnectionDVDDVD
 Music  Photo   
                             
            Setup 
◄
Password
  0-9Number          Select           Return
123
ABCDE FGH I J K LMNOP
QRSTUVWXYZabcde f
gh i j k lmnopq r s t u v
wxyz1234567890−_
+= . ~ !@#$%^&( ) / ? |
a
 Back Spaceb Space Cleard Save
_
Audio
Display       HDMI         Network               ◄   Parental     
Network Selection : Wireless 
Cable Network                                     
Wireless Network                                
►Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
ConnectionDVDDVD
 Music  Photo   
                             
            Setup 
Setup available
◄
Wireless Network
   Select  Return
Access Point  :  Not Selected
DHCP : Off 
IP Address  :  000 . 000 . 000 . 000 
Subnet Mask  :  255 . 255 . 255 . 000 
Gateway  :   000 . 000 . 000 . 000
DNS : Manual
DNS Server  :   000 . 000 . 000 . 000
SaveCancel
HT-BD1250A_XAC_0715-2.indd   53HT-BD1250A_XAC_0715-2.indd   532009-07-15    10:13:212009-07-15    10:13:21
 
						

							Network setup
54
SETTING UP THE NETWORK SETUP OPTIONS
If DHCP is set to On and, DNS to Manual, enter 
your DNS Server.
If DHCP is set to On and, DNS to Auto, you don’t 
need further or additional settings. 
When you select an item, use the number and 
▲▼◄ ► buttons.
If the automatic settings don’t work, contact 
your ISP.
When done, use the ▲▼ buttons to select Save, then press the ENTER button.
If you don’t want to save your work, use the 
▲▼◄ ► buttons to select Cancel, then press the 
ENTER button.
The IP address used in this manual is for illustrative purposes only. You must refer to the 
your network settings for the actual IP address.
To obtain settings for IP address, Subnet mask, Gateway and DNS Server, check the 
network settings in your computer or contact your internet service provider.
Proxy Setting
A proxy server services requests by forwarding them to other servers.
If you are required to confi gure the proxy setting, enter the settings specifi ed by the ISP.
To setup, follow steps 1~3 on page 51.
Press the 
▲▼ buttons to select Proxy, then press the 
ENTER or 
► button.
Server 
Port 
User 
Password 
For more information, contact your ISP (Internet Service Provider). •
•
M

7.
8.
M

4.
•
•
•
•
M
Audio
Display       HDMI         Network               ◄   Parental     
Network Selection : Wireless 
Cable Network                                     
Wireless Network                                
►Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
ConnectionDVDDVD
 Music  Photo   
                             
            Setup 
Setup not availableSetup available
◄
Wireless Network
   Select  Return
Access Point  :  Not Selected
DHCP : On
IP Address  :  000 . 000 . 000 . 000 
Subnet Mask  :  255 . 255 . 255 . 000 
Gateway  :   000 . 000 . 000 . 000
DNS : Manual
DNS Server  :   000 . 000 . 000 . 000
SaveCancel
Audio
Display       HDMI         Network               ◄   Parental     
Network Selection : Wireless 
Cable Network                                     
Wireless Network                                
►Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
ConnectionDVDDVD
 Music  Photo   
                             
            Setup 
Setup not available
◄
Wireless Network
   Select  Return
Access Point  :  Not Selected
DHCP : On 
IP Address  :  000 . 000 . 000 . 000 
Subnet Mask  :  255 . 255 . 255 . 000 
Gateway  :   000 . 000 . 000 . 000
DNS : Manual
DNS Server  :   000 . 000 . 000 . 000
SaveCancel
Audio
Display       HDMI         Network               ◄   Parental     
Network Selection : Wireless 
Cable Network                                     
Wireless Network                                
►Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
ConnectionDVDDVD
 Music  Photo   
                             
            Setup 
◄
Proxy
   Select  Return
Proxy : Off
Server : 
Port : 8080
User : 
Password : 
SaveCancel
HT-BD1250A_XAC_0715-2.indd   54HT-BD1250A_XAC_0715-2.indd   542009-07-15    10:13:262009-07-15    10:13:26
 
						

							55
ENG
●  NETWORK SETUP
NTP Server (Used to Retrieve Time Information from NTP Server)
To setup, follow steps 1~3 on page 51.
Press the 
▲▼ buttons to select NTP Server, then press 
the ENTER or 
► button.
On : the player automatically connects to the Internet 
server in order to adjust the time setting.
Off : the player does not connect to the Internet server 
to adjust the time setting.
Network Connection Test
Use this menu to check whether your network connection is working or not.
To setup, follow steps 1~3 on page 51.
Press the 
▲▼ buttons to select Network Connection 
Test, then press the ENTER or 
► button.
BD-LIVE Internet Connection
The Blu-ray Home Theater supports BD-LIVE which enables you to enjoy a variety of interactive service 
contents provided by the disc manufacturer through a network connection. To enjoy this feature, you 
must fi rst perform the LAN connection (see page 30) or Wireless Lan adapter connection to the USB slot.
* You must have a minimum 1 GB USB Memory device inserted in one of the USB slots in order to 
download content from BD-LIVE.
The Internet connection may be restricted while you are using BD-LIVE contents.
To setup, follow steps 1~3 on page 51.
Press the 
▲▼ buttons to select BD-LIVE Internet 
Connection, then press the ENTER or 
► button.
Allow (All) : The Internet connection will be allowed for 
all BD-LIVE contents.
Allow (Valid Only) : The Internet connection will be 
allowed only for BD-LIVE contents containing a valid 
certifi cate.
Prohibit : No Internet connection will be allowed for 
any BD-LIVE content.
What is a valid certifi cate? When the Blu-ray Home Theater uses BD-LIVE to send the disc 
data and request to the server to certify the disc, the server uses the transferred data to 
check if the disc is valid and sends the certifi cate back to the player.
The Internet connection may be restricted while you are using BD-LIVE contents. 4.
•
•
4.
4.
•
•
•M

Audio
Display       HDMI         Network               ◄   Parental     
Cable Network                                    
Wireless Network
Proxy
NTP Server  :  Off                      
►Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
ConnectionDVDDVD
 Music  Photo   
                             
            Setup 
OnOff
Audio
Display       HDMI         Network               ◄   Parental     
Cable Network                                    
Wireless Network
Proxy
NTP Server  :  Off                      
►Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
ConnectionDVDDVD
 Music  Photo   
                             
            Setup 
◄
Network Connection Test
    Return
✔ MAC Address (00:10:18:00:00:70)
✔ IP Address.Subnet Mask.Gateway.DNS Server✔ Gateway Ping
✔ Internet Service Test
Your network is operating properly
Audio
Display       HDMI         Network               ◄   Parental     
Proxy
NTP Server  :  Off                      
Network Connection TestBD-LIVE Internet  
: Allow (Vaild Only)
ConnectionDVDDVD
 Music  Photo   
                             
            Setup 
Allow(All)Allow(Valid Only)
Prohibit
HT-BD1250A_XAC_0715-2.indd   55HT-BD1250A_XAC_0715-2.indd   552009-07-15    10:13:292009-07-15    10:13:29
 
						

							BD data management
56
BD Data (stored in external USB fl ash memory) is Blu-ray Disc content such as trailers and other 
special features downloaded from the BD-LIVE service or Blu-ray Discs.
*  You must have a minimum 1GB USB Memory device inserted in one of the USB slots in order to download
content from BD-LIVE.
SYSTEM DEVICE MANAGEMENT
You can manage user data stored in BD data.
With the unit in Stop mode, press the MENU button.
Press the 
▲▼◄► buttons to select Setup, then press 
the ENTER or 
► button.
Press the 
▲▼ buttons to select System, then press the 
ENTER or 
► button.
Press the 
▲▼ buttons to select BD Data Management, 
then press the  ENTER or 
► button.
- To delete the fl ash memory -
Press the ENTER button to select BD Data Delete.
The message "All BD data will be deleted. Do you want to 
continue?" will be displayed.
Press the 
◄► button to select Yes, then press the 
ENTER button.
Description of Device(Storage) Information on the Player
Total Size : Total size of the Device(Storage).
Available Size : Available size of the Device(Storage).
Memory size information on the current device(storage) is located to the right of the BD 
Data Management menu.
In the external memory mode, disc playback will be stopped if you disconnect the USB 
device in the middle of the playback.
We recommend using an USB device that supports USB 2.0 protocols, FAT32 format and 
4MB or more read /write speed.
The Resume Play function may not work after formatting the storage device. 1.
2.
3.
4.
1.
2.
•
•M



System               ◄Language 
Audio 
Display 
HDMI 
Network 
Parental 
Time Zone
Clock Set
Power On/Off sound  :  On
BD Data Management                                   
►System UpdateDVDDVD
 Music  Photo   
                             
            Setup 
System               ◄Language 
Audio 
Display 
HDMI 
Network 
Parental 
Time Zone
Clock Set
Power On/Off sound  :  On
BD Data Management                                   
►System UpdateDVDDVD
 Music  Photo   
                             
            Setup BD Data Management
                              Select      Return
Current Device : External Flash Memory
Total Size : 953MB     Available Size : 889MB
BD Data Delete
HT-BD1250A_XAC_0715-2.indd   56HT-BD1250A_XAC_0715-2.indd   562009-07-15    10:14:332009-07-15    10:14:33
 
						

							57
ENG
●  SYSTEM UPGRADE
System upgrade
Samsung may offer upgrades to your Blu-ray Home Theater's fi rmware in the future. To upgrade this fi rmware you must :
Go to samsung.com and refer to the ‘SUPPORT’ page to download the latest fi rmware.
You can use a CD-R or a USB fl ash drive to perform the fi rmware upgrade. For more information, see “Upgrade 
Manual” at the website mentioned above.
or
Connect the network (see pages 30~31) and follow the steps below.
FIRMWARE UPGRADE
With the unit in Stop mode/No Disc mode, press the 
MENU button.
Press the 
▲▼◄► buttons to select Setup, then press 
the ENTER or 
► button.
Press the 
▲▼ buttons to select System, then press the 
ENTER or
 ► button.
Press the 
▲▼ buttons to select System Update, then 
press the ENTER or
 ► button.
The player will check the cable or network connection 
status automatically. The connection checking window will 
be displayed.
If the upgrade is possible : You will see information on the 
current and new versions of fi rmware in a message box.
If the upgrade is not possible : You will see the following 
description in the message box.
If the cable is not connected :
“Ethernet cable is not connected. Please, check the 
Ethernet cable”
If the network connection has failed :
“This system can not connect to internet for update. 
Please, check the network setup”
If no latest version is released (the latest version has 
been already installed) : 
"The latest version of the fi rmware is already installed. 
There is no need to update."
If there is a disc in the player :
"Please maintain "No Disc" state for network update."
This indicates that you must remove all discs from the 
unit to perform the update.
If the server service is not available :
“ Update Server is under maintenance. Please try again 
later.”
1.
2.
1.
2.
3.
4.
5.


•
•
•
•
•
System          ◄Language 
Audio 
Display 
HDMI 
Network 
Parental 
Clock Set 
Power On/Off sound      :  On
BD Data Menagement
System Update                   ►DVDDVD
 Music  Photo   
                             
            Setup 
System          ◄Language 
Audio 
Display 
HDMI 
Network 
Parental DVDDVD
 Music  Photo   
                             
            Setup 
◄
System          ◄Language 
Audio 
Display 
HDMI 
Network 
Parental 
Clock Set 
Power On/Off sound      :  On
BD Data Menagement
System Update                   ►DVDDVD
 Music  Photo   
                             
            Setup System Update
Now, Checking.
Please wait...
1234
System          ◄Language 
Audio 
Display 
HDMI 
Network 
Parental 
Clock Set 
Power On/Off sound      :  On
BD Data Menagement
System Update                   ►DVDDVD
 Music  Photo   
                             
            Setup System Update
The new update data was found.
Current Version : XXXXX
New Version : XXXXX
1234
CancelStart
System          ◄Language 
Audio 
Display 
HDMI 
Network 
Parental 
Clock Set 
Power On/Off sound      :  On
BD Data Menagement
System Update                   ►DVDDVD
 Music  Photo   
                             
            Setup System Update
This system can not connect
to internet for update.
Please, check the network setup.
OK
1234
HT-BD1250A_XAC_0715-3.indd   57HT-BD1250A_XAC_0715-3.indd   572009-07-15    10:33:372009-07-15    10:33:37
 
						

							System upgrade
58
FIRMWARE UPGRADE
To perform the system upgrade, press the ◄ ► buttons 
to select Start and then press the ENTER button.
The system update gets started.
If you select Cancel during the download process, you are 
prompted to confi rm your selection in a message box.
If you want to cancel the download, select Yes and press 
the ENTER button. 
Verifi cation will proceed. When download is done, the 
fi rmware update process will begin automatically.
 When the installation is done, the player will automatically
  turn off in 5 seconds.
  All settings will revert to the factory settings. The next
  time you start the system and you will see the menu
  language selection window.
If you want to cancel the upgrade in the process of 
downloading the upgrade data, press the ENTER 
button. You will see a confi rmation message.
Selecting Yes will end the upgrade process, and 
selecting No will continue the upgrade process.
When the system upgrade is done, check the 
fi rmware details in the System Upgrade menu. 
Do not turn off the player during the System Upgrade, 
as it may cause the player to not work properly.
You must use a USB Flash Drive to do software upgrades using the USB Host jack.
Other USB devices(ex. MP3 player) are not guaranteed to work.
There should be only one fi rmware upgrade fi le in USB fl ash drive for the player to properly 
perform an upgrade.
Oversized USB drives may not be able to be inserted when a LAN or HDMI cable is connected. 
6.
7.
8.
9.
10.
M





System          ◄Language 
Audio 
Display 
HDMI 
Network 
Parental 
Clock Set 
Power On/Off sound      :  On
BD Data Menagement
System Update                   ►DVDDVD
 Music  Photo   
                             
            Setup System Update
The new update data was found.
Current Version : XXXXX
New Version : XXXXX
1234
StartCancel
System          ◄Language 
Audio 
Display 
HDMI 
Network 
Parental 
Clock Set 
Power On/Off sound      :  On
BD Data Menagement
System Update                   ►DVDDVD
 Music  Photo   
                             
            Setup System Update
Downloading update data...
Please, do not turn off the power.
34
Cancel
12
60%
System          ◄Language 
Audio 
Display 
HDMI 
Network 
Parental 
Clock Set 
Power On/Off sound      :  On
BD Data Menagement
System Update                   ►DVDDVD
 Music  Photo   
                             
            Setup System Update
Do you want to cancel the update operation?
3412
YesNo
System          ◄Language 
Audio 
Display 
HDMI 
Network 
Parental 
Clock Set 
Power On/Off sound      :  On
BD Data Menagement
System Update                   ►DVDDVD
 Music  Photo   
                             
            Setup System Update
Verifying update data
Please wait.
4132
System          ◄Language 
Audio 
Display 
HDMI 
Network 
Parental 
Clock Set 
Power On/Off sound      :  On
BD Data Menagement
System Update                   ►DVDDVD
 Music  Photo   
                             
            Setup System Update
Firmware Update.
Now, Processing...
Please, do not turn off the power.
The power will be off automatically 
after update is fi nished.3142
HT-BD1250A_XAC_0715-3.indd   58HT-BD1250A_XAC_0715-3.indd   582009-07-15    10:33:522009-07-15    10:33:52
 
						

							59
ENG
●  SYSTEM UPGRADE
SYSTEM INFORMATION
When the fi rmware upgrade is done, check the fi rmware details by following the steps below. 
With the unit in Stop mode/No Disc mode, press the 
MENU button.
Press the 
▲▼◄► buttons to select Setup, then press 
the ENTER or 
► button.
Press the 
▲▼ buttons to select System, then press the 
ENTER or
 ► button.
Press the 
▲▼ buttons to select System Information, 
then press the ENTER or
 ► button.
You can see detailed information about the current 
fi rmware. 
Press the ENTER button to select OK. 
System Setup menu will be displayed.
FIRMWARE UPGRADE NOTIFICATION
This popup menu appears when a newer fi rmware version is available from SAMSUNG's update server than what is 
currently on the Blu-ray Home Theater.
Yes : Select this to upgrade now.
No : Select this if you plan to upgrade later.
1.
2.
3.
4.
5.
•
•
System          ◄Language 
Audio 
Display 
HDMI 
Network 
Parental DVDDVD
 Music  Photo   
                             
            Setup 
◄
System          ◄Language 
Audio 
Display 
HDMI 
Network 
Parental System Information     ►Time Zone
Clock Set
Power On/Off sound      :  On BD Data ManagementSystem Update                   
DVDDVD
 Music  Photo   
                             
            Setup 
System          ◄Language 
Audio 
Display 
HDMI 
Network 
Parental System Information     ►Time Zone
Clock Set
Power On/Off sound      :  On BD Data ManagementSystem Update                   
DVDDVD
 Music  Photo   
                             
            Setup 
System Information
S/W : XXXXXXX
Loader : XXXXXXX
Region : A/1 (BD/DVD)
ESN : XXXX
OK
System Update
New Firmware is available.
Do you want to update now?
YesNo
HT-BD1250A_XAC_0715-3.indd   59HT-BD1250A_XAC_0715-3.indd   592009-07-15    10:33:582009-07-15    10:33:58
 
						

							Watching a movie
60
USING THE DISPLAY FUNCTION
hgfZCV
 
During playback, press the INFO button on the remote 
control.
If the Blu-ray Disc has the PIP feature, press the INFO 
button in the PIP section to display PIP-related 
information.
Press the 
▲▼ buttons to select the desired item.
Press the 
◄ ► buttons to make the desired setup change 
and then press the ENTER button.
You may use the number buttons of the remote control 
to directly access a title, chapter or to start the playback 
from a desired time.
To make the screen disappear, press the INFO button 
again.
 
If you are playing contents from the info menu, some functions may not be enabled depending on the disc.
Title : To access the desired title when there is more than one in the disc. For example, if there is more than 
one movie on a Blu-ray Disc/DVD, each movie will be identifi ed as a Title.
Chapter: Most Blu-ray Disc/DVD discs are recorded in chapters so that you can quickly fi nd a specifi c chapter.
Audio : Refers to the fi lm's soundtrack language. A Blu-ray Disc can contain up to 32 audio languages and a 
DVD up to 8.
Playing Time : Allows playback of the fi lm from a desired time. You must enter the starting time as a reference. 
The time search function does not operate on some discs.
Subtitle : Refers to the subtitle languages available in the disc. You will be able to choose the subtitle 
languages or, if you prefer, turn them off from the screen. A Blu-ray Disc can contain up to 255 subtitle 
languages, and a DVD up to 32.
Angle : When a Blu-ray Disc/DVD contains multiple angles of a particular scene, you can use the ANGLE 
function.
BONUSVIEW Video/BONUSVIEW Audio : You can make BONUSVIEW Video or BONUSVIEW Audio settings if the 
current title of a Blu-ray Disc appears in the PIP section. The BONUSVIEW Video / BONUSVIEW Audio options, 
however, will be disabled with a Blu-ray Disc that does not support the PIP feature.
Picture Mode : This function enables you to adjust video quality when you are connected to a TV via HDMI.
- Dynamic : Choose this setting to increase Sharpness.
- Normal : Choose this setting for most viewing applications.
- Movie : This is the best setting for watching movies.
- User : The user can adjust the sharpness and noise reduction function respectively.  1.
•
2.
3.
•
4.M








BD                                                    Info
§ Change s Select
Title  : 000/034Chapter  : 000/002Playing Time    : 00:00:06
Audio    : 1/1 ENG Multi CH
Subtitle  : NONE
Angle  : 01/01
Picture Mode     : Normal
BD                                                    Info
§ Change s Select
Title  : 000/034Chapter  : 000/002Playing Time    : 00:00:06
Audio    : 1/1 ENG Multi CH
Subtitle  : NONE
Angle  : 01/01
BONUSVIEW Video : 01/01BONUSVIEW Audio  : 1/1 ENG 2CH
Picture Mode     : Normal

HT-BD1250A_XAC_0715-3.indd   60HT-BD1250A_XAC_0715-3.indd   602009-07-15    10:34:012009-07-15    10:34:01