Samsung Ht Bd1255 User Manual

21
ENG
●  CONNECTIONS
How to Install the Speaker on the Stand (HT-BD1252/HT-BD1255)
  Turn the STAND upside-down and connect it 
  to the STAND BASE.
  Insert  ve small SCREWS into the  ve holes
  marked with arrows using a screwdriver as 
  shown in the illustration. 
  Connect upper SPEAKER to the assembled STAND.
  Insert another large SCREW into the hole on the
  rear of the speaker marked with arrow using 
  a 
screwdriver.
1.
2.
3.
4.
STAND BASE
STAND
12
34
  If you place a speaker near your TV...

22
Connections
CONNECTING THE OPTIONAL WIRELESS RECEIVING MODULE
To connect the rear speakers by wireless, you have to purchase the wirel\
ess receiving module and TX card from 
your Samsung retailer.
When you have Purchased the Wireless Receiving Module (SWA-4000)
This product (HT-BD1250/HT-BD1252/HT-BD1255) should be connected with \
the SWA-4000 only.
Front Speaker (R)
Rear Speaker (L) Subwoofer
Center Speaker
Rear Speaker (R)
WIRELESS RECEIVER MODULE
Front Speaker (L)
HT-BD1250
Front Speaker (R)
Rear...

23
ENG
●  CONNECTIONS
 Place the wireless receiver module at the rear of the listening position\
. If the wireless 
receiver module is too close to the main unit, some sound interruption m\
ay be heard due 
to interference.
If you use a device such as a microwave oven, wireless LAN Card or any o\
ther device that 
uses the same frequency (5.8GHz) near the system, some sound interrupt\
ion may be 
heard due to interference.
The transmission distance from the main unit to the wireless receiving m\
odule is...

24
Connections
CONNECTING THE VIDEO OUT TO YOUR TV
Choose one of the three methods for connecting to a TV.
 
 
       METHOD 1 : HDMI 
(BEST)
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the 
Blu-ray Home Theater 
to the HDMI IN jack on your TV.
Depending on your TV, certain HDMI output resolutions may not work.
If an HDMI cable is connected from the player to a TV, the Blu-ray Home Theater’s output is set to 
HDMI automatically within 10 seconds.
If you are using the...

25
ENG
●  CONNECTIONS
HDMI connection description
HDMI connector - Supports video and digital audio data.
- HDMI outputs only a pure digital signal to the TV.
- 
  If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.
Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a BD/DVD, the data 
transmitted to a TV is digital. Therefore either a digital-to-analog converter (in the Blu-ray Home Theater) or...

26
Connections
CONNECTING AN iPod
You can enjoy music, video fi les from an iPod through the main unit. For iPod operation with this Blu-ray home 
theater, see pages 27 and 76 ~ 78.
    Connect the iPod Dock to the iPod Jack on the rear side of the main unit.
  Place the iPod in the dock. 
“iPod Connected” message appears on the TV screen.
 You must have the VIDEO output connected to your TV to view iPod video (See page 25).
As the cable ports are close together, be sure to remove the USB memory drive...

27
ENG
●  CONNECTIONS
iPod models that can be used with the HT-BD1250/HT-BD1252/HT-BD1255
“Made for iPod” means that an electronic accessory has been design\
ed to connect specically to 
iPod and has been certied by the developer to meet Apple performance\
 standards.
“Works with iPhone” means that an electronic accessory has been de\
signed to connect 
specically to an iPhone and has been certied by the developer to\
 meet Apple performance 
standards.
Apple is not responsible for the operation of this...

28
Connections
CONNECTING AUDIO FROM EXTERNAL COMPONENTS
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
     Connect the Digital Input (OPTICAL 1 or OPTICAL 2) on the main unit to the Digital Output of the 
external digital component.
  Press the FUNCTION button on the main unit to select D.IN input.
The mode switches as follows : BD/DVD ➞ D.IN 1 ➞ D.IN 2 ➞ AUX ➞ FM.
To see video from your Cable Box/Satellite receiver,...

29
ENG
●  CONNECTIONS
AUX : Connecting an External Analog Component
Analog signal components such as a VCR.
     Connect AUX IN (Audio) on the main unit to the Audio Out of the external analog component.
  Be sure to match connector colors.
  Press the AUX button on the remote control to select AUX input. 
You can also use the FUNCTION button on the main unit.
The mode switches as follows : BD/DVD ➞ D.IN 1 ➞ D.IN 2 ➞ AUX ➞ FM.
 
 
You can connect the Video Output jack of your VCR to the TV, and connect...

30
Connections
CONNECTING TO THE NETWORK
To access network service or upgrade the current fi rmware, you must make one of the following connections.
By connecting to a network, you can access the BD-LIVE, YouTube services, PC streaming and Software upgrades 
from Samsung’s update server. We recommend you use an AP or router for the network.
If you don’t have one, you'll need two network providing services to use the PC streaming function.
Case 1 : Connecting a Direct LAN Cable to your Modem
Using the...