Samsung Ht A100t User Manual

							
41
ENg

●  PlAYBACK

Fast playback 
During playback, press the (,) button.
Each time you press either button, the playback speed 
will change as follows: 
2x 4x 8x 32x Normal.
Compatible Devices 
USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc  
in Windows (2000 or later) without additional driver installation.)
MP3 Player: HDD and fl ash type MP3 players.
Digital camera: Cameras that support USB Mass Storage v1.0.
Cameras that operate as a removable disc in Windows (2000 or later) without additional driver installation.
USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
You may experience a difference in playback quality when you connect a USB1.1 device.
For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation.
.  USB card Reader: One slot USB card reader and Multi slot USB card reader.
Depending on the manufacturer. the USB card reader may not be supported.
If you install multiple memory devices into a multi card reader, you may experience problems.
.  If you use a USB extension cable, the USB device might not be recognized.
Supported Formats
FormatFile nameFile 
extensionBit rateVersionPixelSampling
Frequency
Still PictureJPGJPG  .JPEG––640x480–
MusicMP3.MP380~384kbps––44.1kHz
WMA.WMA56~128kbpsV8–44.1kHz
Movie
WMV.WMV4MbpsV1,V2,V3,V7720x48044.1KHz~48KHz
DivX.AVI,.ASF4MbpsDivX3.11~
DivX5.1, XviD720x48044.1KHz~48KHz
CBI (Control/Bulk/Interrupt) is not supported.Digital Cameras that use PTP protocol or require additional program installation when connected to a PC are not supported.  A device using NTFS fi le system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) fi le system is supported.)Some MP3 players, when connected to this product, may not operate depending on the sector size of their fi le systems.The USB host function is not supported if a product that transfers media fi les by its manufacturer-specifi c program is connected.  Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.The USB host function of this product does not support all USB devices. For information on the supported devices, see page 54.
~
1.
.
.
~
4.
~
~
~
~
~~
~
~
~
~~

02056S-HT-A100-XAC-ENG.indd   412008-03-18   �� 11:56:56 
						

							
4

system setup
For your convenience, you can set this Home Theater's features for the b\
est use in your home environment. 
SETTINg THE lANgUAgE
OSD(On-Screen Display) language is set to English by default.
In Stop mode, press the MENU button.
Press the Cursor % button to move to Setup and then press the  
ENTE r
 or + button.
Select  language and then press the  ENTEr or + button.
Press the Cursor $,% button to select  OSD language and then  
press the  ENTEr or + button.
Press the Cursor $,% button to select the desired language  
and then press the  ENTEr button.
Once the setup is complete, the OSD will be English if  
English has been selected as language.
d Press the  rETU rN button to return to the previous level.  
d Press the EXIT button to exit the setup screen.
OSD  lAN gUA gE :   
Selecting the OSD Language
AUDIO : Selecting the Audio Language (recorded on the disc)
 SUBTIT lE : Selecting the Subtitle Language (recorded on the disc)
 
DISC MENU  :  Selecting the Disc Menu Language (recorded on the disc)
a   
If the language you selected is not recorded on the disc, menu 
     language will not change even if you set it to your desired language.
 
OTHErS
 : To select another language, select OTHERS and  
  enter the language code of your country (see page 53). 
 
  AUDIO, SUBTITLE and DISC MENU languages can be
 
                  selected. 
1.
.
.
4.
.
~
~
~
~
~
~
MOVE ENTErEXIT
r ETU rN
MOVE ENTErEXIT
r ETU rN
MOVE ENTErEXIT
r ETU rN
MOVE SElECTEXIT
r ETU rN

02056S-HT-A100-XAC-ENG.indd   422008-03-18   �� 11:56:57 
						

							
4
ENg

●  SYSTEM SETUP
SETTINg TV SCrEEN TYPE 
Depending on your TV type (Wide Screen or conventional 4:3), you can select the TV's aspect ratio. 
In Stop mode, press the MENU button.
Press the Cursor % button to move to Setup and then press the  
ENTE r
 or + button.
Press the Cursor % button to move to  TV DISPlAY and then  
press the  ENTEr or + button.
Press the Cursor $,% button to select the desired item  
and then press the  ENTEr button.
Once the setup is complete, you will be taken to the  
previous screen.
d Press the  rETU rN button to return to the previous level. 
d Press the EXIT button to exit the setup screen.
Adjusting the TV Aspect ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high 
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different 
screen sizes, you should adjust the aspect ratio to fit your TV or monitor. 
 
For a standard TV, select either 4:3PS or  4:3lB option according to personal preference.  
Select WIDE/HDTV if you have a widescreen TV.
4:3PS (4:3 Pan&Scan)  
Select this to play a 16:9 picture in the pan & scan mode on a 
conventional TV.
You can see the central portion of the screen only (with the sides of 
the 16:9 picture cut off).
4:3 lB (4:3  letterbox) 
 
Select this to play a 16:9 picture in the letter box mode on a 
conventional TV.
Black bars will appear at the top and bottom of the screen.
WIDE/HDTV  
Select this to view a 16:9 picture in the full-screen mode on your 
widescreen TV.
You can enjoy the widescreen aspect.
If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
Since DVD discs are recorded in various image formats, they will look different depending on the software, the 
type of TV, and the TV aspect ratio setting.
When using HDMI, the screen is automatically converted to Wide mode.
1.
.
.
4.
~
~
~
~
M`
`
`
MOVE ENTErEXIT
r ETU rN
MOVE SElECTEXIT
r ETU rN

02056S-HT-A100-XAC-ENG.indd   432008-03-18   �� 11:56:58 
						

							
44

system setup

SETTINg PArENTAl CONTrOlS (rATINg lEVEl)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
In Stop mode, press the MENU button.
Press the Cursor % button to move to Setup and then press the  
ENTE r
 or + button.
Press the Cursor % button to move to  PArENTA l and then press 
the ENTE r or + button.
Press the Cursor $,% button to select the desired rating level and 
then press the  ENTEr button.
If you have selected Level 6, you cannot view DVDs with Level 7 
or higher.
The higher the level, the closer the content is to violent or adult 
material.
 .    
Enter the password and then press the  ENTEr
 button.
The password is set to "7890" by default.
Once the setup is complete, you will be taken to the previous screen. 
d Press the  rETU rN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
This function works only if a DVD disc contains the rating level information. 
SETTINg THE PASSWOrD
You can set the password for the Parental (rating level) setting.
In Stop mode, press the MENU button.
Press the Cursor % button to move to Setup and then press the  
ENTE r
 or + button.
Press the Cursor % button to move to  PASSWOrD and then  
press the  ENTEr or + button.
Press the  ENTEr button.
Enter the password and then press the  ENTEr button.
Enter the old password, a new password, and confirm new 
password.
The setting is complete.  
The password is set to "7890" by default.
If you have forgotten the rating level password, do the following
While the player is in No DIsc mode, hold the DVD Players STOP (T) button for longer than  
5 seconds. INITIAl appears on the display and all settings will return to the default values.
Press the  POWEr button.                
Using the  rESET function will erase all stored settings. Do not use this unless necessary.
1.
.
.
4.
~
~
~
~
M`
1.
.
.
4.
.
~
~
M`
~
~
MOVE ENTErEXIT
r ETU rN
MOVE SElECTEXIT
r ETU rN
MOVE SElECTEXIT
r ETU rN
MOVE ENTErEXIT
r ETU rN

02056S-HT-A100-XAC-ENG.indd   442008-03-18   �� 11:56:58 
						

							
4
ENg

●  SYSTEM SETUP

SETTINg THE WAllPAPEr
  G
While watching a DVD or JPEG CD, you can set the image you like as background wallpaper.
During playback, press the PAUSE () button when 
an image you like appears.
Press the lOgO button.
COPY lOgO DATA will be displayed on the TV screen.
The power will turn off and then back on.
The selected wallpaper will be displayed. 
You can select up to 3 wallpaper settings. 
This function will not work when the HDMI output is 720p, 1080i or 1080p.
TO SElECT ONE OF THE 3 WAllPAPEr SETTINgS YOU'VE MADE
In Stop mode, press the MENU button.
Press the Cursor % button to move to Setup and then press the 
ENTEr or + button.
Press the Cursor % button to move to lOgO and then press the 
ENTEr or + button.
Press the Cursor $,% button select the desired USEr, and then 
press the ENTEr button.
This selects one of the 3 wallpaper screens.
.   Press the EXIT button to exit the setup screen.
OrIgINAl : Select this to set the Samsung Logo image as 
                     your wallpaper.
USEr : Select this to set the desired image as your
             wallpaper. 
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
1.
.
~
.
~
~
M`
1.
.
.
4.
~
~
~
MOVEENTErEXITrETUrN
MOVESElECTEXITrETUrN
lOgO IS COPIEDII PAUSECOPY lOgO DATAII PAUSE

02056S-HT-A100-XAC-ENG.indd   452008-03-18   �� 11:57:00 
						

							
4

system setup

DVD PlAYBACK MODE
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio. 
To play back the DVD-Video portion of the DVD-Audio disc, set the unit 
to DVD-Video mode.
Press the MENU button while the disc tray is open.
Press the Cursor % button to move to Setup and then press the 
ENTE r
 or + button.
Press the Cursor % button to move to DVD TYPE  and then press   
the ENTE r or + button.
Press the Cursor $,% button to move to DVD VIDEO and then 
press the  ENTEr button.
Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.  
DVD VIDEO : Set to play the DVD video contents contained on  
                       a DVD audio disc.
DVD AUDIO  : Set to play the default DVD audio.
DVD Play mode is set to DVD Audio as factory default setting.
Powering off the main unit will automatically switch to the DVD Audio mode.
DviX (r) registration
Please use the Registration code to register this player with the DivX (R) video on demand format. 
To learn more, go to www.divx.com/vod.
SETTINg THE DrC (DYNAMIC rANgE COMPrESSION)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby 
Digital sound when watching movies at low volume at night.
In Stop mode, press the MENU button.
Press the Cursor % button to move to Audio and then press the 
ENTE r
 or + button.
Press the Cursor % button to move to  DrC and then press the 
ENTE r
 or + button.
Press the Cursor , to adjust the  DrC.
When the Cursor  button is pressed, the effect is greater, and 
when the Cursor  button is pressed, the effect is smaller. 
d Press the  rETU rN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
1.
.
.
4.
~
~
~
M`
`
1.
.
.
4.
~
MOVE ENTErEXIT
r ETU rN
MOVE ENTErEXIT
r ETU rN
CHAN gEEXIT
r ETU rN
MOVE ENTErEXIT
r ETU rN

02056S-HT-A100-XAC-ENG.indd   462008-03-18   �� 11:57:00 
						

							
4
ENg

●  SYSTEM SETUP

SETTINg THE AV SYNC
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match the video.
In Stop mode, press the MENU button.
Press the Cursor % button to move to Audio and then press the 
ENTE r
 or + button.
Press the Cursor % button to move to AV-SYNC and then press the 
ENTE r
 or + button.
Press the Cursor , button to select the AV-SYNC Delay Time  and 
then press the  ENTEr button.
You can set the audio delay time between 0 ms and 300 ms. Set it to 
the optimal status. 
d Press the  rETU rN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
SETTINg THE HDMI AUDIO
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
In Stop mode, press the MENU button.
Press the Cursor   button to move to Audio and then press the 
ENTE r
 or + button.
Press the Cursor  button to move to HDMI AUDIO and then press 
the ENTE r or + button.
Press the Cursor , button to select ON or OFF and then press   the ENTE r button. 
•  ON : Both video and audio signals are transmitted over the HDMI             connection cable, and audio is output through your             TV speakers only.
•  OFF : Video is transmitted over the HDMI connection cable only,               and audio is output through the home theater speakers only. 
d Press the  rETU rN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
  
The default setting of this function is HDMI AUDIO OFF.
HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
1.
.
.
4.
~
1.
.
.
4.
M`
`
MOVE SElECTEXIT
r ETU rN
MOVE SElECTEXIT
r ETU rN
MOVE ENTErEXIT
r ETU rN
MOVE ENTErEXIT
r ETU rN

02056S-HT-A100-XAC-ENG.indd   472008-03-18   �� 11:57:06 
						

							
4

radio
lISTENINg TO rADIO
remote Control 
Press the TUNEr button to select the FM band.
Tune in to the desired station.
Automatic Tuning 1 : When the [,] button is 
pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press and hold the ,,. 
button to automatically search for active 
broadcasting stations.
Manual Tuning : Briefl y press the ,,. button to 
increase or decrease the frequency incrementally.
Main Unit 
Press the FUNCTION button to select the FM band.
Select a broadcast station.
Automatic Tuning 1 : Press the STOP (@) button to 
select PrESET and then press the [,] button to 
select the preset station. 
Automatic Tuning 2 : Press the STOP (@) button to 
select MANUAl and then press and hold  the [,] 
button to automatically search the band.
Manual Tuning : Press the STOP (@) button to select MANUAl and then briefl y press the 
button to tune in to a lower or higher frequency.
Press the MO/ST button to listen in Mono/Stereo.
•  Each time the button is pressed, the sound switches between STErEO and MONO.
• In a poor reception area, select MONO for a clear, interference-free broadcast.
PrESETTINg STATIONS
Example : Presetting FM 89.10 in the memory 
Press the TUNEr button to select the FM band.
Press the ,,. button to select 89.10. 
Press the TUNEr MEMOrY button.
01 fl ashes in the display.
Press the [,] button to select preset number.
You can select between 1 and 15 presets.
.   Press the TUNEr  MEMOrY button again.
Press the TUNEr MEMOrY button before Number 
disappears from the display.
Number disappears from the display and the station is 
stored in memory.
.   To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the [,] button on the remote control to select a channel.
  This unit does not receive AM broadcasts.
1.
.
~
~
~
1.
.
~
~
~
1.
.
.
~
4.
~
~
~
~
M`

02056S-HT-A100-XAC-ENG.indd   482008-03-18   �� 11:57:07 
						

							4
ENg
●  CONVENIENT FUNCTION
SlEEP TIMEr FUNCTION
You can set the time that the Home Theater will shut itself off.
Press the SlEEP button.
SlEEP will be displayed. Each time the button is pressed, the preset time changes as follows :
10  20  30  60  90  120  150  OFF
To confi rm the sleep timer setting, press the SlEEP button.
The remaining time before the Home Theater will shut itself off is 
displayed.
Pressing the button again changes the sleep time from what you 
have set earlier.   
To cancel the sleep timer, press the SlEEP button until OFF appears on the display.
ADJUSTINg DISPlAY BrIgHTNESS
You can adjust the brightness of the display on the main unit so it won't 
interfere with your movie viewing.
Press the DIMMEr button.
Each time the button is pressed, the brightness of front display will be adjusted.
MUTE FUNCTION
This is useful when answering a doorbell or telephone call.
Press the MUTE button.
MUTE appears in the display.
To restore the sound, press the MUTE button again.
P.BASS 
P.BASS function stresses low tones providing thudding sound effects.
Press the P.BASS button to select P.BASS mode.
You can select the level of low tones you desire.
  The P.BASS function is only available with 2 channel LPCM sources such as mp3,Divx,cd and wma. Press P.BASS 
button and "POWER BASS ON" will be displayed on the screen. 
~
~
~
~
~
~
1.
.
M`
convenient function
02056S-HT-A100-XAC-ENG.indd   492008-03-18   �� 11:57:09 
						

							
0

convenient function
V-SOUND (VIrTUAl SOUND)
The 2-channel sounds can be listened with virtual effects for producing much more realistic sounds as in 5.1 channels.
Press the V-SOUND button.Each time the button is pressed, the selection changes as follows :
 V.SO ON    V.SO OFF 
VIrTUAl HEADPHONE FUNCTION
Use headphones (3.5Ø) (not supplied) for private listening pleasure. You can enjoy dynamic sound effects similar 
to that of 5.1 channel surround sound using conventional stereo headphones.
Plug the headphones into the headphone jack.
You can purchase headphones from most Electronics 
stores.
Press the V-H/P button.
Each time the button is pressed, the selection 
alternates between  and .
• V.HP :  Select to enjoy a 5.1-channel surround sound
 that gives the feeling of being in a stadium or    
  concert hall.
• OFF : Select to listen to a standard 2-channel stereo  
   sound.
Do not listen at extremely high volume levels when using 
headphones.         
Extended, high-volume listening can lead to permanent 
hearing loss.
~
1.
~
.
~
M`

02056S-HT-A100-XAC-ENG.indd   502008-03-18   �� 11:57:11