Samsung Ht A100t User Manual

1
ENg
●  CONNECTIONS
CONNECTINg AUDIO FrOM EXTErNAl COMPONENTS
AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player
  
    
Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3 
player. 
Press the AUX button on the remote control to select AUX1 input.
You can also use the FUNCTION button on the main unit. 
The mode switches as follows :  
DVD/CD   DIgITA l IN  AUX 1  AUX 2  USB  BT AUDIO  FM.
1.
.
~
Audio Cable(not...



connections

AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR. 
  
  Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
 
Be sure to match connector colors.
 
 
Press the 
AUX button on the remote control to select AUX 2 input. 
You can also use the FUNCTION button on the main unit. 
The mode switches as follows :  
DVD/CD   DIgITA l IN  AUX 1  AUX 2  USB  BT AUDIO  FM.
  
You can connect the Video Output...


ENg

●  CONNECTIONS

CONNECTINg THE FM ANTENNA
  
    
Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
     
Slowly move the antenna wire around until you find a location where reception is good, then fasten it 
to a wall or other rigid surface.
  
This unit does not receive AM broadcasts. 
 
Cooling Fan
The cooling fan supplies cool air to the unit to  prevent overheating.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit...

4

before using your home theater
The DVD Home Theater's remote can be used to control Samsung TVs.
Plug the main unit's power cord into the AC power supply.
Press the DVD rECEIVEr button to switch to DVD 
RECEIVER mode to operate the DVD Home Theater.
 
Press the FUNCTION button on the main unit or DVD button 
on the remote to enable DVD/CD playback.
Press the TV button to set the remote to TV mode.
Press the POWEr button to turn on your Samsung TV
 with this remote. 
Press the TV/VIDEO...


ENg

●  PlAYBACK
playback
DISC PlAYBACK
 B
 Load a disc vertically into the Disc Insert Hole.
Place a disc gently into the tray with the disc’s label facing 
up.
Close the compartment by pressing the PlAY () button.
Playback starts automatically.
To stop playback, press the STOP (@) button during 
playback.
 If pressed once, PrESS PlAY is displayed and the stop position will be stored in memory.    
If the PlAY () button or ENTEr button is pressed, playback resumes from the stop position....



playback

MP3/WMA-CD PlAYBACK
Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played.
A
Load the MP3/WMA disc.
The MP3/WMA menu screen will appear and 
playback will start.
The appearance of the menu depends on the 
MP3/WMA disc.
 WMA-DRM fi les cannot be played.
In Stop mode, use the Cursor ,,, button 
to select the album, and then press the ENTEr button.
Use the Cursor , button to select the track.
To change the album, use the Cursor ,,, 
button to select another album in...


ENg

●  PlAYBACK

JPEg FIlE PlAYBACK
Images captured with a digital camera or camcorder, or JPEG fi les on a PC can be stored on a CD and then can be 
played back with this Home Theater.
rotate/Flip Function G
Press the Cursor ,,, button during playback.
The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for standard JPEG fi les 
and 2048 x 1536 (or 3.0 MPixel) for progressive image fi les. 
If a JPEG fi le is played when the HDMI output resolution is...



playback

DIVX PlAYBACK
The functions discussed on this page apply to DivX disc playback only.
Skip Forward/Back D
During playback, press the [,] button. 
Goes to the next fi le whenever you press the ] button, if there are over 2 fi les in the disc. 
Goes to the previous fi le whenever you press the 
[ button, if there are over 2 fi les in the disc.
Fast Playback D
During playback, press the (,) button.To play back the disc at a faster speed, press the ( or ) button during playback. 
Each...


ENg

●  PlAYBACK

If the Disc has more than One Subtitle File D
If the disc has more than one subtitle fi le, the default 
subtitle may not match the movie and you will have 
to select your subtitle language as follows:
In Stop mode, press the Cursor , button, select the 
desired subtitle () from the TV screen, and then 
press the ENTEr button.
When you select the desired DivX fi le from the TV 
screen, the movie will be played normally.
DivX(Digital internet video eXpress) 
DivX is a video...

0

playback

USINg THE PlAYBACK FUNCTION
Displaying Disc Information  BAGD
You can view disc playback information  on the TV screen.
Press the INFO button.
Depending on the disc, the disc information display may 
appear different.
Depending on the disc, you can also select DOLBY DIGITAL,  
or PRO LOGIC.
 appears on the TV screen! 
If this symbol appears on the TV screen when pressing 
a button, that operation is not possible with the disc 
currently being played.
DVD displayTITLE displayELAPSED...