Samsung HP-S6373 Plasma Display Owners Instructions
Have a look at the manual Samsung HP-S6373 Plasma Display Owners Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 58
English-58 How to Reset the
TV after the V-Chip Blocks a Channel (“Emergency Escape”)
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear:
Channel Is Locked by
TV-PG[ S ]
Use the NUMBER buttons to enter your
pin number to unlock all channels.
Press EXIT to clear PIN.
Press MENU for main menu.
Channel Is Locked by
TV-PG[ L ]
Use the NUMBER buttons to enter your
pin number to unlock all channels.
Press EXIT to clear PIN....](http://img.usermanuals.tech/thumb/66/92432/w64_6373PLASMA_d-57.png "Page 58
English-58 How to Reset the
TV after the V-Chip Blocks a Channel (“Emergency Escape”)
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear:
Channel Is Locked by
TV-PG[ S ]
Use the NUMBER buttons to enter your
pin number to unlock all channels.
Press EXIT to clear PIN.
Press MENU for main menu.
Channel Is Locked by
TV-PG[ L ]
Use the NUMBER buttons to enter your
pin number to unlock all channels.
Press EXIT to clear PIN....")
English-61 3.Tighten the 6 screws in step 2 (plastic hanger + screw ) to the rear holes of the product.4.Remove safety pin (#) and insert the 4 product holders into the corresponding bracket holes (!). Then place the product (@) so that it is firmly fixed to the bracket. Make sure to reinsert and tighten the safety pin ( #) to securely hold the product to the bracket. PDP Wall Bracket Plastic Hanger Wall Note: Please secure the mounting bracket on the wall surface after setting its angle at 0° 1.Secure the SET to the wall mount bracket. (Please refer to the following instructions.) 2.Set the angle by pulling the upper end of the SET attached to bracket in the direction of the arrow. (Refer to the illustration on the right.) 3.The angle can be adjusted from 0° to 15° by ±2°.Hold onto the middle of the PDP to adjust the angle (not the sides of the PDP). How to Adjust Mounting Angle Note: To connect external devices such as a DVD or a Home Theater System to the PDP, please refer to following instructions: 1.Be sure to remove the safety pins underneath the PDP. Note: If the safety pins are not removed, the angle cannot be adjusted. Any attempt to do so may cause damage to the PDP. 2.Hold onto the bottom of the PDP and pull forward fully as directed by the arrow as illustrated) to adjust the angle. (0°~20° by 2°) Insert the Safety Pins to the front guide holes on both sides as illustrated in figure @. Note: Viewing the PDP after connecting the external devices Remove the Safety Pins to adjust the angle to 0°, and then secure the Safety Pins again. • For safety, be sure to secure the PDP using the safety pins. If the safety pins are not used, the PDP may fall, causing serious injury. Connecting External Devices to the PDP BN68-00991Q-01Eng 8/8/06 4:46 PM Page 61
English-62 Model Name Screen Size (Diagonal) Power Supply Power Consumption PC Resolution Antenna Input Video Input Audio Input Sound Output Audio Output Dimensions (WxDxH) Body With stand Weight Body With standHP-S6373 63 inch AC 110-120V~ 60Hz 570 W 1366 x 768 @ 60 Hz ANT 1 - CABLE IN ANT 2 - AIR IN 75Ω unbalanced AV1, AV2 S-VIDEO1, S-VIDEO2 COMPONENT1 - 480i/480p/720p/1080i COMPONENT2 - 480i/480p/720p/1080i PC HDMI1 (DVI Compatible) HDMI2 AV1, AV2 S-VIDEO1, S-VIDEO2 COMPONENT1 - 480i/480p/720p/1080i COMPONENT2 - 480i/480p/720p/1080i PC DVI AUDIO (R/L) OPTICAL (DIGITAL OUT) COAXIAL (DIGITAL OUT) 60.2 X 3.4 X 39.4 inches (1528.3 X 87.6 X 1001.3 mm) 60.2 X 16.7 X 42.8 inches (1528.3 X 422.9 X 1086.7 mm) 154.3 lbs (70kg) 191.8 lbs (87 kg) Specifications ➢ This device is a Class B digital apparatus.➢ Design and specifications are subject to change without prior notice. How to assemble the Stand-Base 1.Using the 4 screws for securing the stand pegs and the monitor, firmly attach the monitor to the stand pegs. (The exterior of the set may be different than the picture.) Ye s Stand Swivel (Left / Right)HP-S6373 -20° ~ 20° ➢Two or more people should carry the TV. Never lay the TV on the floor because of possible damage to the screen. Always store the TV upright. Warning Firmly secure the stand to the TV before moving it, as the stand may fall and could cause serious injury. BN68-00991Q-01Eng 8/8/06 4:46 PM Page 62
English-63 Dimensions 60.2 30.8 31.6 39.4 18.4 42.818.1 55.6 54.8 35.6 TOP VIEWFRONT VIEW 26.6 16.0 7.6 3.4 7.2 9.4 16.7 1.5 SIDE VIEWREAR VIEW JACK PANEL DETAIL 2 1/4"H x 18 3/4"W @ 5 3/4" UP FROM BOTTOM BN68-00991Q-01Eng 8/8/06 4:46 PM Page 63
BN68-00991Q-01 Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country CANADA U.S.ACustomer Care Center 1-800-SAMSUNG (7267864) 1-800-SAMSUNG (7267864)Web Site www.samsung.com/ca www.samsung.com Address Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada Samsung Electronique Canada Inc., Service à la Clientèle 55 Standish Court Mississauga, Ontario L5R 4B2 Canada Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511 BN68-00991Q-01Eng 8/8/06 4:46 PM Page 64