Samsung HP-S4253, HP-S5053 Plasma Display Owners Instructions
Here you can view all the pages of manual Samsung HP-S4253, HP-S5053 Plasma Display Owners Instructions. The Samsung manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 91
91 Note Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: •The interlace mode is not supported. •The TV operates abnormally if a non-standard video format is selected. •The table above conforms to IBM/VESA regulations and is based on using the Analog Input. •A “ ✔” mark means that this mode can be supported. Notes •The PC text quality of HP-S4253 is optimum in XGA mode (1024 x 768@60Hz)....
Page 92
92 After connecting the TV to your PC, adjust the position of the screen if it is not well-aligned. Preset: • Press the SOURCE button to select “PC.” 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “PC”, then press the ENTER button. 3 Press the ▲or ▼button to select “Position”, then press the ENTER button. 4 Adjust the position of screen by pressing the ▲/▼/œ/√button. 5 Press the EXIT button to exit. Changing the...
Page 93
93 Plug & Play√Language : English√Time√Game Mode : Off√V-Chip√Caption√†More SetupTV MoveEnterReturn Picture Quality Adjustment Picture Automatic Adjustment Preset: •Press the SOURCE button to select “PC”. 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “PC”, then press the ENTER button. 3 Press the ▲or ▼button to select “Auto Adjustment”, then press the ENTER button. The message “Auto Adjustment in progress. Please wait.”...
Page 94
Coarse and Fine Tuning (Fine) Adjustment The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. Preset: •Press the SOURCE button to select “PC”. 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or...
Page 95
95 Image Reset The Image Reset feature resets all settings to the factory defaults. Preset: •Press the SOURCE button to select “PC”. 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “PC”, then press the ENTER button. 3 Press the ▲or ▼button to select “Image Reset”, then press the ENTER button. The message “Image Reset is completed.” appears on the screen. • The previously adjusted settings will be reset to the factory...
Page 96
BN68-00991B-01Eng(086~117) 2/17/06 2:01 PM Page 96
Page 97
PLASMA DISPLAY PANEL Time Setting Setting the Clock .......................................................................98 Setting the On/Off Timer .........................................................100 Setting the Sleep Timer ............................................................101 BN68-00991B-01Eng(086~117) 2/17/06 2:01 PM Page 97
Page 98
98 Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) 98 Option 1: Setting the Clock Manually 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “Time”, then press the ENTER button. Press the ENTER button to select “Clock”. 3 Press the ENTER button to select “Clock Mode”. Press the ▲or ▼button...
Page 99
99 99 Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “Time”, then press the ENTER button. Press the ENTER button to select “Clock”. 3 Press the ENTER button to select “Clock Mode”. Press the ▲or ▼button to select “Auto”, then press the ENTER button. 4 Press the ▲or ▼button to select “Time Zone”, then press...
Page 100
100100 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “Time”, then press the ENTER button. Press the ▲or ▼button to select “On Timer”, then press the ENTER button. Press the ▲or ▼button to adjust “Hour”, then press the √button to move to the next step. Set other items using the same method as above. To activate “On Timer” with the setting entered, set Activation to “Yes” by pressing …or † button. When finished,...