Samsung HP-R4272 Plasma Display User Manual

31
Connecting to HDMI (High Definition Multimedia Interface)/DVI Compatible
TV Rear Panel
Connect the DVI AUDIO (L, R) input jacks on the TV with the AUDIO output jacks on the 
Set-Top Box using an audio cable.
Note
•Use analog stereo audio inputs when using the HDMI input with a device that outputs 
DVI instead of HDMI.
Connect the HDMI input jack on the TV and the VIDEO output jack on the Set-Top Box 
using an HDMI/DVI cable.
Note
•The HDMI IN jack is not compatible with PC.
How to Connect
1
2
Audio...

Connecting a Digital Audio System
There are many types of digital audio systems on the market today.
A simplified illustration of an audio system is shown below. For more information, see your
audio system owner’s manual.
32
If your audio system has a coaxial digital audio input, connect to the “COAXIAL” output jack 
on the TV.
If your audio system has a optical digital audio input, connect to the “OPTICAL“ output jack 
on the TV.
Be certain to remove the black cover from the optical output before...

33
Connecting to an Analog Amplifier
TV Rear Panel
The “AUDIO OUT (AUDIO L/R)” terminals cannot be used for external speakers. 
You must hook them up to an amplifier.
When an audio amplifier is connected to the “AUDIO OUT (AUDIO L/R)” terminals: 
Decrease the gain (volume) of the audio amplifier, turn the TV’s internal mute on and adjust
the volume level with the volume control of the amplifier.
How to Connect
1
Analog AmplifierAudio cable
Power cord
BN68-00825G-X0Eng_002~035  4/22/05  9:26 AM  Page 33 

BN68-00825G-X0Eng_002~035  4/22/05  9:26 AM  Page 34 

PLASMA DISPLAY PANEL
Operation
Turning the TV On and Off ............................................................36
Viewing the Menus and Displays ..................................................40
Memorizing the Channels ............................................................41
Adding and Erasing Channels ......................................................44
Setting Up Your Remote Control ....................................................47
Viewing an External Signal Source...

Turning the TV On and Off
36
Turning the TV On and Off
Press the POWER button on the remote control.
The TV will be turned on and you will be able to use its features.
You can also use the Power button on the front of the TV.
Note
•If your TV isn’t turned on when the POWER button is pressed:
Press the 
MODEbutton to check if the TV mode has been
chosen
. 
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently:
Setting the language, checking...

3
Press the ▲or ▼button to memorize the channels of
the selected connection. 
Press the ENTER button to select “Start”.
Notes
•  If the antenna is connected to ANT 1 IN (CABLE IN),
select “Cable” and if it is connected to ANT 2 IN 
(AIR IN), select “Air”.
•  If both ANT 1 IN and ANT 2 IN are connected, 
select the “Air + Cable”.
•
If the CableCARD is inserted into the “CableCARD” 
slot on the rear panel, “Cable” and “Air + Cable” 
are not available.
When selecting Cable TV :
Press the ▲or ▼button to...

38
4
The TV will begin memorizing all of the available
channels. After all the available channels are stored, 
the Auto program menu reappears. 
Press the ENTER button to select OK when channel 
memorization is complete.
“Set to daylight savings time.” menu is automatically 
displayed.
Press the ENTER button at any time to interrupt the 
memorization process.
5
Press the ENTER button. Press the ▲or ▼button to 
select “Yes” or “No”, then the ENTER button.
“Select the time zone in which you live” menu is...

39
If you want to reset this feature...
1
Press the MENU button. Press the ▲or ▼button to select
“Setup”, then press the ENTER button.
2
Press the ENTER button to select “Plug & Play”.
3
For further details on setting up options, refer to the 
previous page.
Note
•Plug and Play can only be accessed in the TV mode.
Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√
†More
SetupTV
MoveEnterReturn
Menu language, Channels 
and Time will be set.i
Start
BN68-00825G-X0Eng_036~049...

40
Viewing the Menus and Displays
Your TV has a simple, easy-to-use menu system that appears on the TV screen. 
This system makes it convenient and fast to use features on the TV. 
Your TV also lets you display the status of many of your TV’s features.
Viewing the Menus
1
With the power on, press the MENU button on the
remote control. The main menu appears on the 
screen. The Input menu is selected.
2
Press the ▲or ▼button to move to items in the menu.
Press the œ/√/ENTER buttons to display, 
change, or...