Samsung HP-R4272 Plasma Display User Manual

121
How to Set up Restrictions using the “TV Parental Guidelines”
First, set up a personal identification number (PIN), and enable the V-Chip. (See previous section.)
Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating.
1
Press the MENU button. Press the ▲or ▼button to select
“Setup”, then press the ENTER button.
2
Press the ▲or ▼button to select “V-Chip”, then press
the ENTER button.
The message “Enter PIN” will appear. 
Enter your 4 digit PIN number....

5
At this point, one of the TV-Ratings is selected.
Press the ENTER button. Depending on your existing 
setup, a symbol will be selected.
(Blank = Unblocked, = Blocked)
While “ ” is selected, press the ENTER button to 
block or unblock the category.
To select a different TV-Rating, press the ▲or ▼
button and then repeat the process.
Note 1: The TV-Y, TV-Y7, TV-G, TV-PG, TV-14 and TV-MA have additional options. 
See the next step to change any of the following sub-ratings:
FV: Fantasy violence
D:...

123
How to Set up Restrictions using the MPAA Ratings: G, PG, PG-13, R, NC-17, X, NR
The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main
application is for movies. When the V-Chip lock is on, the TV will automatically block any programs
that are coded with objectionable ratings (either MPAA or TV-Ratings).
1
Press the MENU button. Press the ▲or ▼button to select
“Setup”, then press the ENTER button. 
2
Press the ▲or ▼button to select “V-Chip”, then press
the...

How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”)
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the
following message will appear: 
1
Enter your PIN number.
To resume normal viewing, tune to a different channel using CH or CH button. 
Under certain conditions (depending on the rating of the local TV programs) the V-Chip might lock out
all the channels. In this case, use the V-Chip function for an “emergency escape”:
1
Press the...

125
Electronic Program Guide
Your TV has an “Electronic Program Guide” to help you
navigate through all the possible viewing options. 
The EPG supplies information, such as program lists, 
start and end times of all available channels. 
In addition, detailed information about the program is 
often available in the EPG. (The availability and the 
amount of program details will vary depending on the
broadcaster.)
Viewing the Electronic Program Guide
ADisplays which channel is currently selected to show...

126
Using the Electronic Program Guide
1
Press the MENU button.
Press the ▲or ▼button to select “Guide”, then 
press the ENTER button.
2
Press the ▲or ▼button to select “Default Guide”, then
press the ENTER button.
3
Press the ▲or ▼button to select “Mini Guide” or “Full
Guide”, then press the ENTER button.
•  Mini Guide : Displays the guide for one channel.
•  Full Guide : Displays the guide for all channels.
4
Press the MENU button to exit.
Mini Guide√Full Guide√Reminder List√Default Guide : Mini...

127
Viewing Information about a Single Channel
1
Press the MENU button.
Press the ▲or ▼button to select “Guide”, then 
press the ENTER button.
2
Press the ENTER button to select “Mini Guide”.
Press the ▲or ▼buttons to view information about 
one channel by time.
You can switch between Full Guide mode and Mini 
Guide mode by pressing the Red button repeatedly. 
Select the program you want by pressing the ▲or 
▼buttons and press the INFO button on the remote 
control.
• ENTER button : Press to watch the...

Viewing Information about Channels
Displays the program time and content for all channels.
This function is available only when the program is digital.
1
Press the MENU button.
Press the ▲or ▼button to select “Guide”, then 
press the ENTER button.
2
Press the ▲or ▼button to select “Full Guide”, then press
the ENTER button.
3
Press the Green button to activate “-2 Hours” and the
Yellow button to activate “+2 Hours”.
• INFO button : Displays detailed information for 
the selected digital program.
•...

129
Viewing the Reminder List
If you have made a scheduled viewing list of programs you would like to see, the channel will be 
automatically switched to the scheduled program at the scheduled time even if you are watching 
another program.
1
Press the MENU button.
Press the ▲or ▼button to select “Guide”, then 
press the ENTER button.
2
Press the ENTER button to select “Full Guide”.
Press the ▲or ▼button to select programs you would
like to see, then press the enter button.
The symbol “
✔” will be...

130
To view the Reminder List
1
Press the MENU button.
Press the ▲or ▼button to select “Guide”, then 
press the ENTER button.
2
Press the ▲or ▼button to select “Reminder List”, then
press the ENTER button.
To remove the scheduled programs
1
Press the ▲or ▼button to select a program to be
removed, then press the ENTER button.
To remove all programs, press the œor √button to 
select “Cancel All”, then press the ENTER button. 
2
Press the MENU button to exit.
Mini Guide√Full Guide√Reminder List√Default...