Samsung HL-S4265W Dlp Tv Owners Instructions

English - 51
Editing the Channel Lists
You can edit channels to be added or deleted.
Preset : To use the Channel Manager function, first run Auto Program (see page 31).
1
Press the MENU button. 
Press the …or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or †button to
select “Channel Manager”,
then press the ENTER button.
3
Press the …or †
button to select
“Added”, then press
the ENTER button.
•  All channels on the
Channel Manager
are added and
displayed.
Press the …/†/œ/√button...

English - 52
Channel Control
4
Press the ▲or ▼ button to select
“Delete” to delete a channel, then
press the ENTER button; the
mark will disappear.
To select the deselected channel, 
select “Add” to add a channel by
pressing the ▲or ▼button.
The  mark will appear.
•  Red button (Channel Mode) :
If you press the Red button
repeatedly, the All Channel List,
the Added Channel List or the
Favorite Channel List is selected
sequentially.
Press the EXIT button to exit.Channel Manager /Added
List Mode Delete...

English - 53
Default List mode
You can set All, Added or Favorite to be the Default List that appears when you press the CH MGR
button.
1
Press the MENU button. 
Press the …or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or †button to
select “Channel Manager”,
then press the ENTER button.
3
Press the …or †
button to select
“Default List mode”,
then press the ENTER button.
Press the …or †
button to select “All”,
“Added”, or “Favorite”,
then press the ENTER button.
•  All: All of...

English - 54
Channel Control
Labeling the Channels
Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”,
“PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear below the channel number.
1
Press the CH  or CH  button to tune to the channel that
will be labeled. 
2
Press the MENU button. 
Press the …or †button to
select “Channel”, then press
the ENTER...

English - 55
Fine Tuning Analog Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1
Press the MENU button. 
Press the …or †button to
select “Channel”, then press
the ENTER button. 
2
Press the …or †button to
select “Fine Tune”, then press
the ENTER button.
3
Press the œor √button to
adjust the fine tuning.
4
To store the fine tuning 
setting in the TV’s memory,
press the ENTER button. 
To reset the fine tuning
setting, press the †button to
select “Reset”, then press...

English - 56
Channel Control
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) 
channels have either perfect reception quality or you will not receive them at all. So, unlike analog 
channels, you cannot fine tune a digital channel.
You can, however, adjust your antenna to improve the reception of available digital channels.
1
Press the MENU button.
Press the …or †button to
select “Channel”, then press
the ENTER button....

English - 57
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve
the reception (a low-noise preamplifier boosts the incoming signal).
1
Press the MENU button.
Press the …or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or †button to
select “LNA”, then press the
ENTER button.
3
Press the …or †button to
select “On” or “Off”, then
press the ENTER button.
4
Press the EXIT button to exit.
NOTES
•LNA functions only when antenna...

SAMSUNG
BP68-00586F-00Eng(048~059)  3/30/06  7:14 PM  Page 58 

Picture Control
BP68-00586F-00Eng(048~059)  3/30/06  7:14 PM  Page 59 

Picture Control
English - 60
Picture Control
You can select the type of picture which best corresponds to your viewing requirements.
Changing the Picture Standard
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the ENTER button
again to select “Mode”.
3
Press the ENTER button.
Press the …or †button to
select the desired picture
mode (Dynamic, Standard,
Movie, Custom), then press
the ENTER button.           
Press the EXIT button to exit.
Alternate...