Samsung HL-S4265W Dlp Tv Owners Instructions

English - 111
Viewing the Current Resolution
You can get the resolution information of your PC.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the …or †button to
select “Setup”, then press
the ENTER button.
3
Press the …or †button to
select “PC”, then press the
ENTER button.
The resolution information
is displayed on the screen.
Press the EXIT button to exit.
NOTE
•To change the resolution, see pages 105~106.
Setup
Language : English√Time√Game Mode : Off√V-Chip√Caption√Menu...

PC Display
English - 112
Initializing the Picture Settings
You can replace all picture settings with the factory default values.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the …or †button to
select “Setup”, then press
the ENTER button.
3
Press the …or †button to
select “PC”, then press the
ENTER button.
4
Press the …or †button to
select “Image Reset”, then
press the ENTER button.
The picture settings are
replaced with the factory
default values.
Press the EXIT button to...

Appendix
BP68-00586F-00Eng(104~113)  3/30/06  7:18 PM  Page 113 

Appendix
English - 114
Replacing the Lamp
•Why do I need to replace the lamp?
The lamp used in a DLP TV has a limited lifespan. For the best screen quality it needs to be 
replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new.
•When do I need to replace it?
It should be replaced when the screen becomes darker, less clear or when all three LEDs on the
front (TIMER, LAMP, & STAND BY/TEMP) are flashing.
•Check before lamp replacement 
1. The lamp must be the...

English - 115
• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves.
1
Unplug TV, then use a 
screwdriver to remove the 
screws.
2
Remove the Lamp cover.
3
Remove the Lamp cover duct
holding the locker and pulling
it out.
4
Remove the screw securing
the Lamp by using a
screwdriver.
5
Separate the Lamp from the
engine by holding the handle
and pulling it out.
NOTES
•Be sure the replacement Lamp is the same type.
•After replacing the lamp, align the lamp cover with the groove and...

Appendix
English - 116
Troubleshooting 
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these
troubleshooting tips apply, then call your nearest Samsung authorized service center.
Possible Solution
Try another channel. Adjust the antenna.
Check all wire connections.
Try another channel. Adjust the antenna.
Make sure the MUTE button is off.
Try another channel. Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections....

English - 117
Cleaning and Maintaining Your TV
Please follow these guidelines to get the maximum performance from your TV.
Placement
•Do not put the TV near extremely hot, cold, humid or dusty places.
• Do not place the TV near appliances with electric motors that create mag\
netic fields, such as 
vacuum cleaners.
• Keep the ventilation openings clear; do not place the TV on a soft surface, such as cloth or 
paper.
• Place the TV in a vertical position only.
Liquids
•Do not handle liquids near or on the...

This page is intentionally
left blank.
BP68-00586F-00Eng(114~119)  3/30/06  7:19 PM  Page 118 

This page is intentionally
left blank.
BP68-00586F-00Eng(114~119)  3/30/06  7:19 PM  Page 119 

BP68-00586F-00
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG 
customer care center.
Country
CANADA
U.S.ACustomer Care Center 

1-800-SAMSUNG (7267864)
1-800-SAMSUNG (7267864)Web Site
www.samsung.com/ca
www.samsung.com
Address
Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
Samsung Electronique Canada Inc., Service à la Clientèle
55 Standish Court Mississauga, Ontario L5R...