Samsung HL-R6767W Dlp Tv Owners Instructions

							1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the …or †button to
select “Setup”, then press
the ENTER button.
3
Press the …or †button to
select “PC”, then press the
ENTER button.
4
Press the …or †button to
select “Auto Adjustment”,
then press the ENTER button.
The picture quality and
position are automatically
adjusted, and the picture
returns to original view
about a few seconds later.
Press the EXIT button to exit.
English - 131
Setup
Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Setup
▲ MorePC√Port Selection: G-Link√Function Help: Off√CableCARDTM√CableCARDTMSetup√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
PC
Image Lock√Position√Auto Adjustment
Image Reset
Resolution       : 1024 x 768, 60Hz
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Adjusting the Picture Quality and Position Automatically
This feature allows the TV to self-adjust to the incoming video signal. The values of fine, coarse and
position are adjusted automatically.
Auto Adjustment in Progress
Please Wait.i
BP68-00469B-00(124~143)  9/13/05  3:12 PM  Page 131 
						

							PC Display
English - 132
Changing the Picture Size (PC Mode)
You can select the picture size which best corresponds to your viewing requirements.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
Press the …or †button to
select “Size”, then press the
ENTER button.
3
Press the œor √button to
select the screen format you
want, then press the ENTER
button.
Press the EXIT button to exit.
NOTES
•The “WidePC” and “4:3” modes are recommended for the 
PC mode.
•
In VGA (640x480), SVGA (800x600) and XGA(1024x768) modes,
the “Wide TV”, “Wide PC” and “4:3” modes are available.
•In XGA (1024x768) mode, the “WideTV” mode is available.
•“WideTV”: Scales the picture to the size of the TV screen 
regardless of the aspect ratio of the input source.
•“4:3”: Displays the picture as it is without changing the aspect
ratio of input source.
•“WidePC”: Scales the picture to 92% of the TV screen, 
regardless of the aspect ratio of the input source. The picture 
position (     ,     ) and size (     ) adjustment are available by
pressing the …/†/œ/√button.
Alternate method
Press the P.SIZE button on the
remote control repeatedly to
change the picture Size.Picture Size
16:9 ➝ 4:3
WideTV ➝ WidePC ➝ 4:3
16:9 ➝ 4:3
16:9 ➝ Zoom1➝ Zoom2 ➝ 4:3
WideTV ➝ WidePC ➝ 4:3 Source (PC)
1920 x 1080i
1280 x 720 (PC Mode)
1280 x 720 (DTV Mode)
720 x 483 (480p)
Others
Picture
Mode : Standard√Size : WidePC√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Size
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
WideTVWidePC 4:3
BP68-00469B-00(124~143)  9/13/05  3:12 PM  Page 132 
						

							English - 133
Viewing the Current Resolution
You can get the resolution information of your PC.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the …or †button to
select “Setup”, then press
the ENTER button.
3
Press the …or †button to
select “PC”, then press the
ENTER button.
The resolution information
is displayed on the screen.
NOTE
•To change the resolution, see pages 127~128.
Setup
Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Setup
▲ MorePC√Port Selection: G-Link√Function Help: Off√CableCARDTM√CableCARDTMSetup√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
PC
Image Lock√Position√Auto Adjustment
Image Reset
Resolution       : 1024 x 768, 60Hz
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
BP68-00469B-00(124~143)  9/13/05  3:12 PM  Page 133 
						

							PC Display
English - 134
Initializing the Picture Settings
You can replace all picture settings with the factory default values.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the …or †button to
select “Setup”, then press
the ENTER button.
3
Press the …or †button to
select “PC”, then press the
ENTER button.
4
Press the …or †button to
select “Image Reset”, then
press the ENTER button.
The picture settings are
replaced with the factory
default values.
Press the EXIT button to exit.
Setup
Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Setup
▲ MorePC√Port Selection: G-Link√Function Help: Off√CableCARDTM√CableCARDTMSetup√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
PC
Image Lock√Position√Auto Adjustment
Image Reset
Resolution       : 1024 x 768, 60Hz
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Image Reset is completed.i
BP68-00469B-00(124~143)  9/13/05  3:12 PM  Page 134 
						

							Appendix
BP68-00469B-00(124~143)  9/13/05  3:12 PM  Page 135 
						

							Appendix
English - 136
PIP Settings
O:PIP and swap operate
▲:PIP operate and swap doesn’t operate
X:PIP doesn’t operate
Replacing the Lamp
•Why do I need to replace the lamp?
The lamp used in a DLP TV has a limited lifespan. For the best screen quality it needs to be 
replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new.
•When do I need to replace it?
It should be replaced when the screen becomes darker, less clear or when all three LEDs on the
front (TIMER, LAMP, & STAND BY/TEMP) are flashing.
•Check before lamp replacement 
1. The lamp must be the same code number and type. 
2. The lamp type is indicated on the right side of the TV. It is also indicated on the lamp case. 
3. After checking the code number for the lamp, give the code number to the store where you 
purchased the TV or to a Samsung Service center. 
•Caution
1. Replace with the correct code numbered lamp to avoid damage to the TV. 
2. Turn the power off and wait for 30 minutes before replacing the lamp as it will be hot. 
3. Do not touch the glass part of the lamp with your bare hands nor insert any foreign object
inside the cover as it may cause poor screen quality, electric shock or fire.
4. Do not place the old lamp near flammable objects or within the reach of children. 
5.  Be sure to connect this TV directly to an AC wall outlet. If the TV’s AC plug is connected to a
cable box or other source, it will not allow for proper cool down time. 
SubMain
ATSC  QAM  NTSC  AV1  AV2  AV3  S-Video1  S-Video2  S-Video3  Component1  Component2  HDMI  PC   D-Net
X
X
▲
▲
▲
▲
▲
▲
▲
▲
▲X
X
▲
▲
▲
▲
▲
▲
▲
▲
▲X
X
O
O
O
O
O
O
O
O
OX
X
O
X
O
O
O
O
O
O
OX
X
O
O
X
O
O
O
O
O
OX
X
O
O
O
X
O
O
O
O
OX
X
O
O
O
O
X
O
O
O
OX
X
O
O
O
O
O
X
O
O
OX
X
O
O
O
O
O
O
X
O
OX
X
O
O
O
O
O
O
O
X
OX
X
O
O
O
O
O
O
O
O
XX
X
▲
▲
▲
▲
▲
▲
▲
▲
▲X
X
▲
▲
▲
▲
▲
▲
▲
▲
▲▲
▲
▲
▲
▲
▲
▲
▲
▲
X
XATSC
QAM
NTSC
AV1
AV2
AV3
S-Video1
S-Video2
S-Video3
Component1
Component2
BP68-00469B-00(124~143)  9/13/05  3:12 PM  Page 136 
						

							English - 137
• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves.
1
Unplug TV, then use a 
screwdriver to remove the 
screws.
2
Remove the Lamp cover.
3
Remove the screw securing
the Lamp by using a 
screwdriver.
4
Separate the Lamp from the
engine by holding the handle
and pulling it out.
5
To reinstall the Lamp, follow
these steps in reverse order.
NOTES
•Be sure the replacement Lamp is the same type.
•After replacing the lamp, align the lamp cover with the groove and secure the screws.
•The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective 
circuit).
BP68-00469B-00(124~143)  9/13/05  3:12 PM  Page 137 
						

							Appendix
English - 138
Troubleshooting 
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these
troubleshooting tips apply, then call your nearest Samsung authorized service center.
Possible Solution
Try another channel.
Adjust the antenna.
Check all wire connections.
Try another channel.
Adjust the antenna.
Make sure the MUTE button is off.
Try another channel. Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
Check that the Mute feature is off.
Make sure the program is broadcasted in color.
Adjust the picture settings.
Adjust the antenna.
Check all wire connections.
If you are using a VCR, check the tracking.
Unplug the TV for 30 seconds, then try operating it
again.
Press the MODE button to put your remote control 
into TV mode.
Make sure the remote has batteries.
Make sure the wall outlet is working.
Make sure the TV is plugged in.
Make sure the remote has batteries.
Please check the digital signal strength and input
antenna.
There is a sound when both Air and Cable are set to
“Yes” in the TV Guide On ScreenTMSetup.
The sound is made by the TV trying to receive TV
Guide On Screen
TMdata in Standby mode, and is not
a defect. 
Set up the Antenna (Air)/Cable according to the 
connection status in the TV Guide On Screen
TMSetup.
Problem
Poor picture quality.
Poor sound quality.
No picture or sound.
No color, wrong colors or tints.
Picture rolls vertically.
The TV operates erratically.
Your remote control does not 
operate your TV.
The TV won’t switch on.
Digital broadcasting screen 
problem.
There is a “clicking” sound
repeatedly in Standby mode. 
BP68-00469B-00(124~143)  9/13/05  4:24 PM  Page 138 
						

							English - 139
Possible Solution
The visual qualities of digital channels may vary
depending on the original production method (analog
or digital).       
➔ Classification by the information displayed when 
switching channels.
➔ If the original production method is digital: High 
visual quality program.
➔ If the original production method is analog: The 
digital program displayed on the screen is 
originally an analog program which has been 
converted. The visual quality is of an SD grade.
The HD caption that appears when switching channels
or when pressing the Information button on the remote
control means the selected channel is simply a digital
channel. If the broadcasting station converts an 
analog signal into digital and transmits the signal, 
the visual quality may not be perfect. 
(Applied to Set Top Box built-in model only.)
•The display panel used for the DLP TV is composed of many tiny pixels.
These pixels may occasionally appear on the screen.
Problem
The visual qualities of digital 
channels vary.
Although the TV caption shows HD,
the visual quality is not satisfactory.
BP68-00469B-00(124~143)  9/13/05  3:12 PM  Page 139 
						

							Appendix
English - 140
Cleaning and Maintaining Your TV
With proper care, your TV will give you many years of service. Please follow these guidelines to 
get the maximum performance from your TV.
Placement
•Do not put the TV near extremely hot, cold, humid or dusty places.
•Do not place the TV near appliances with electric motors that create magnetic fields, such as 
vacuum cleaners.
•Keep the ventilation openings clear; do not place the TV on a soft surface, such as cloth or 
paper.
•Place the TV in a vertical position only.
Liquids
•Do not handle liquids near or on the TV. Liquids that spill into it can cause serious damage.
Cabinet
•Never open the cabinet or touch the parts inside.
•Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals.
•Do not put heavy objects on top of the cabinet.
•This DLP TV projects the image onto a large screen by applying an optical system. 
If you place the TV set face down, it might cause a problem because dirt, or some other 
contaminant may become attached to the inside of the TV set. 
Temperature
•If your TV is suddenly moved from a cold to a warm place, unplug the power cord, and allow 
at least two hours for moisture that may have formed inside the unit to dry completely.
BP68-00469B-00(124~143)  9/13/05  3:12 PM  Page 140