Samsung Hl-r5087w Dlp Tv Instruction Manual

Operation
2_BP68-00448A-01(18~31)  1/20/05  5:10 PM  Page 31 

Viewing the Menus
1
Press the MENU button.
The main menu is displayed.
There are six menu groups:
“Input”, “Picture”, “Sound”,
“Channel”, “Setup”, and
“Guide”.
2
Press the …or †button to
select an item you want 
in the menu. 
Press the 
œ, √or ENTER
button to display, change, 
or use the selected items.
Use the ENTER button to
enter items in the menu.
3
Press the EXIT button to exit.
Viewing the Display
Press the INFO button on the
remote control. 
The TV displays the current
channel, the status of...

English - 33
Selecting a Menu Language
1
Press the MENU button.
Press the 
…or †button to
select “Setup”, then press the
ENTER button.
2
Press the ENTER button to
select “Language”.
Press the 
…or †button to
select “English”, “Español”
or “Français”, then press the
ENTER button.
Press the EXIT button to exit.
Setup
Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√▼ More
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Guide
Setup
Language: English
Time
V-Chip
Caption...

Operation
English - 34
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and
cable channels. After the available channels are memorized, use the CH  and CH  buttons
to scan through the channels. This eliminates the need to change channels by entering the channel
digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing
the channels (automatic) and adding and deleting channels (manual).
1
Press the MENU...

4
Press the …or †button to select the
Antenna connection, then press the ENTER
button.
When selecting Cable TV system:
Press the ENTER button to start the auto
program. By default, the cable TV system
is set to “STD”.
If you want to select another type of 
cable system, press the 
œbutton and 
use the 
…or †button to select one of
Analog or Digital “STD”, “HRC” and
“IRC”. Press the ENTER button.
5
Press the √button to select “Start”, then
press the ENTER button to start the auto
program. The TV begins...

English - 36
Operation
Adding and Erasing Channels
You can add channels that were not memorized (or delete unwanted channels from memory).
1
Press the MENU button.
Press the 
…or †button to
select “Channel”, then press
the ENTER button. 
2
Press the …or †button to
select “Add/Delete”, then
press the ENTER button.
3
Repeatedly pressing the
ENTER button will alternate
between add channel and
delete channel.
Press the CH  or CH 
button to switch to the
appropriate channel, then
repeat above. 
Press the EXIT...

English - 37
Changing Channels
Using the Channel Buttons
When you press the CH  or CH  button, the TV changes channels in sequence. 
You will see all the channels that the TV has memorized. 
(The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
Using the Number Buttons
Use the number buttons to quickly switch to any channel.  
Using the “-” Button
The “-” button is used to select stations that broadcast both a digital and analog signal....

Operation
English - 38
Customizing Your Remote Control
Your TV comes equipped with a universal remote control. In addition to controlling the TV, the
universal remote control can also operate a VCR, Cable box, DVD, and Samsung Set-Top Box
(even if your VCR, Cable box and DVD are made by manufacturers other than Samsung). 
NOTE
•The remote control might not be compatible with all VCRs, DVD players and Cable boxes.
Setting Up Your Remote Control to Operate Your VCR (Cable box or
DVD player)
1
Turn off your...

English - 39
Remote Control Codes
VCR Codes
DVD Codes
Cable Box Codes
3_BP68-00448A-01(32~53)  1/20/05  5:11 PM  Page 39 

English - 40
Operation
Setting the Clock
Setting the clock is necessary in order to use the various timer features of the TV. Also,
you can check the time while watching the TV. (Just press the INFO button.)
1
Press the MENU button. 
Press the 
…or †button to
select “Setup”, then press 
the ENTER button.
2
Press the …or †button to
select “Time”, then press the
ENTER button.
Press the ENTER button to
select “Clock”.
3
Press the ENTER button to
select “Clock Mode”.
Press the 
…or † button to
select...