Samsung Hl-r5087w Dlp Tv Instruction Manual

English - 91
Important Notes About Parental Locks
Explanation of the MPAA and TV (FCC) Rating Systems:
TV (FCC) Age-Based Ratings
TV-MA
Mature audiences only. This program may
contain mature themes, profane language,
graphic violence and explicit sexual content.
TV-14
Parents strongly cautioned. This program may
contain sophisticated themes, sexual content,
strong language and more intense violence.
TV-PG
Parental guidance suggested. The program
may contain infrequent coarse language,
limited violence,...

English - 92
Special Features
Viewing Closed Captions (On-Screen Text Messages)
The Analog Caption function operates in either analog RF channel mode or external signal mode.
(Depending on the broadcasting signal, the Analog Caption function may operate on digital
channels.)
1
Press the MENU button.
Press the 
…or †button to
select “Setup”, then press
the ENTER button.
2
Press the …or †button to
select “Caption”, then press
the ENTER button.
3
Press the ENTER button to
select “Caption”.
Press the 
…or...

English - 93
4
Press the …or †button to select “Mode”,
then press the ENTER button.
Press the 
…or †button to select submenu
(CC1~CC4 or Text1~Text4) you want,
then press the ENTER button.
Press the EXIT button to exit.
NOTES
•The default is “CC1”.
CC1 : The Primary Synchronous Caption Service. These are captions in the 
primary language that must be in sync with the sound, preferably 
matched to a specific frame.
CC2 : The Special NonSynchronous Use Captions. This channel carries data 
that is intended...

English - 94
Special Features
Viewing Closed Captions (On-Screen Text Messages)
The Digital Captions function operates on digital channels.
1
Press the MENU button.
Press the 
…or †button to
select “Setup”, then press
the ENTER button.
2
Press the …or †button to
select “Caption”, then press
the ENTER button.
3
Press the ENTER button to
select “Caption”.
Press the 
…or †button to
select “On”, then press the
ENTER button.
4
Press the …or †button to
select “Mode”, then press
the ENTER button.
Press the 
…or...

English - 95
6
Press the …or †button to select “Size”,
then press the ENTER button.
Press the 
…or †button to select one you
want, then press the ENTER button.
Set other listed options below using the
same method as above.
Press the EXIT button to exit.
NOTES
•The availability of captions depends on the program being broadcast.
Alternate method
Press the CAPTION button on the remote
control repeatedly to select “On” or
“Off”.
Size
This option consists of “Default”, “Small”, “Standard”, and “Large”.
The...

English - 96
Special Features
Using the CableCARD
This menu works with a CableCARD provided by a local cable service provider.
Prior to accessing this menu, a CableCARD should be connected to the rear panel of the TV.
For detailed connection instructions refer to the “Connecting CableCARD” section on page 24 of
this manual.
Displaying CableCARD related information
To access information on Status, Pairing, Network Setup of the CableCARD provided by the
service provider in CableCARD menu.
1
Press the MENU...

English - 97
Using the CableCARD Setup Function
Sets up relevant CableCARD options.
CableCARD Reset
Resets CableCARD when the channels provided by CableCARD are not available.
1
Press the MENU button.
Press the 
…or †button to
select “Setup”, then press
the ENTER button.
2
Press the …or †button to
select “CableCARDTMSetup”,
then press the ENTER button.
3
Press the ENTER button to
select “CableCARDTMReset”.
Setup
Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√▼ More...

English - 98
Special Features
Channel List Reorganization
Deletes and reorganizes the channel list provided by CableCARD.
1
Press the MENU button.
Press the 
…or †button to
select “Setup”, then press
the ENTER button.
2
Press the …or †button to
select “CableCARDTMSetup”,
then press the ENTER button.
3
Press the ENTER button to
select “Channel List
Reorganization”.
Setup
Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√▼ More
MoveEnterReturn
Input
Picture
Sound
Channel...

Using the Guide
You can display a list of all channels or your favorite channels.
1
Press the MENU button.
Press the 
…or †button to
select “Guide”, then press
the ENTER button.
2
Press the …or †button to
select “Channel List” or
“Favorite Channel List”, then
press the ENTER button.
To toggle between your
favorite channels or all
channels, use the Yellow
button. 
Alternate method
Press the CH.LIST button
on the remote control to
display a list of channels.
•Red button: Press to display the previous...

English - 100
Special Features
Adding and Erasing Channels
1
Press the MENU button.
Press the 
…or †button to
select “Guide”, then press
the ENTER button.
2
Press the …or †button to
select “Edit Channel List”,
then press the ENTER button. 
3
Press the …or †button to
change channels you want
to add or delete.
Repeatedly pressing ENTER
button will alternate between
“Add” and “Delete”.
4
Press the MENU button to
exit.
Guide
Channel List√Edit Channel List√Favorite Channel List√
MoveEnterReturn
Input
Picture...