Samsung Hl-r5078w Dlp Tv Owners Instructions
Have a look at the manual Samsung Hl-r5078w Dlp Tv Owners Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English - 31 Selecting a Menu Language 1 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. 2 Press the ENTER button to select “Language”. Press the …or †button to select “English”, “Español” or “Français”, then press the ENTER button. Press the EXIT button to exit. Setup Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More MoveEnterReturn Input Picture Sound Channel Setup Listings Setup Language: English Time V-Chip Caption Menu Transparency: Medium Blue Screen : Off Color Weakness ▼ More MoveEnterReturn Input Picture Sound Channel Setup Listings English Español Français BP68-00513A-00Eng(030~053) 6/3/05 3:07 PM Page 31
Operation English - 32 Memorizing the Channels Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH/PAGE and CH/PAGE buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual). 1 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. 2 Press the ENTER button to select “Antenna”. Press the …or †button to select “Air” or “Cable”, then press the ENTER button. 3 Press the …or †button to select “Auto Program”, then press the ENTER button. Selecting the Video Signal Source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or cable system). Channel Antenna: Cable Auto Program Add/Delete Channel List Favorite Channels Name LNA : Off ▼ More MoveEnterReturn Input Picture Sound Channel Setup Listings Channel Antenna : Air√Auto Program√Add/Delete√Channel List√Favorite Channels√Name√LNA : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Listings Channel Antenna : Air√Auto Program√Add/Delete√Channel List√Favorite Channels√Name√LNA : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Listings Air Cable BP68-00513A-00Eng(030~053) 6/3/05 3:07 PM Page 32
English - 33 4 Press the …or †button to select the Antenna connection, then press the ENTER button. When selecting Cable TV system: Press the ENTER button to start the auto program. By default, the cable TV system is set to “STD”. If you want to select another type of cable system, press the œbutton and use the …or †button to select Analog or Digital “STD”, “HRC” or “IRC”. Press the ENTER button. 5 Press the √button to select “Start”, then press the ENTER button to start the auto program. The TV begins memorizing all available stations. Press the ENTER button at any time to interrupt the memorization process. Press the EXIT button to exit. •Air : “Air” antenna signal Cable : “Cable” antenna signal Air+Cable : “Air” and “Cable” antenna signals •If the CableCARD is inserted into the “CableCARD” slot on the rear panel, “Cable” and “Air+Cable” are not available. •STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Auto Program MoveEnterReturn Input Picture Sound Channel Setup Listings Auto Program EnterReturn Auto Program in progress Cable Channel 26•The TV must be connected to an antenna in order to receive digital TV signals. Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control. Stop Select the antennas to memorize. Air Cable Air+Cable Auto Program MoveEnterReturn Input Picture Sound Channel Setup ListingsStart Select the cable system. Analog Digital STD✔ HRC IRC STD✔ HRC IRC StartStart Start Auto Program EnterReturn Input Picture Sound Channel Setup Listings Select the cable system. Analog Digital STD✔ HRC IRC STD✔ HRC IRC Start Move NOTE •All available DTV and analog channels are automatically stored in memory. •When the Cable card is inserted, you do not need to save channels. BP68-00513A-00Eng(030~053) 6/3/05 3:07 PM Page 33
Operation English - 34 Adding and Erasing Channels You can add channels that were not memorized (or delete unwanted channels from memory). 1 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. 2 Press the …or †button to select “Add/Delete”, then press the ENTER button. 3 Repeatedly pressing the ENTER button will alternate between add channel and delete channel. Press the CH/PAGE or CH/PAGE button to switch to the appropriate channel, then repeat above. Press the EXIT button to exit. Channel Antenna : Cable√Auto Program√Add/Delete√Channel List√Favorite Channels√Name√LNA : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Listings Channel Antenna : Cable√Auto Program√Add/Delete√Channel List√Favorite Channels√Name√LNA : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Listings Add/Delete EnterMoveReturn Cable 26Not In Memory Press ENTER to add the channel. Add/Delete EnterMoveReturn Cable 26In Memory Press ENTER to delete the channel. Add Delete BP68-00513A-00Eng(030~053) 6/3/05 3:07 PM Page 34
English - 35 Changing Channels Using the Channel Buttons When you press the CH/PAGE or CH/PAGE button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.) You will not see channels that were either erased or not memorized. Using the Number Buttons Use the number buttons to quickly switch to any channel. Using the “-” Button The “-” button is used to select stations that broadcast both a digital and analog signal. For example, for channel 7-1 (digital), press “7”, then “ -”, then “1”. For channel 7-2 (analog), press “7”, then “ -”, then “2”. Using the Previous Channel Press the PRE-CH button. The TV changes to the last channel you were watching. Press the CH/PAGE or CH/PAGE button to change channels. Press the number buttons to go directly to a channel. For example, to select channel 27, press “2,” then “7.” The TV will change channels when you press the second number. NOTE •HD indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a Analog standard definition signal. DTV Air 7- 1 English Picture Mode Standard Sound Mode Standard MTS English Caption On V-Chip Off 12:00 am Air 7-2 Mono Picture Mode Standard Sound Mode Standard MTS Stereo Caption On V-Chip Off 12:00 am BP68-00513A-00Eng(030~053) 6/3/05 3:07 PM Page 35
Operation English - 36 Customizing Your Remote Control Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal remote control can also operate a VCR, Cable box, DVD, and some Samsung Set-top boxes (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung). NOTE •The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes. Setting Up Your Remote Control to Operate Your VCR (Cable box or DVD player) 1 Turn off your VCR (Cable box or DVD player). 2 Press the MODE button to switch the remote control to the VCR (CABLE or DVD) mode. The remote control has five modes: TV, STB, VCR, CABLE, and DVD. 3 On your Samsung remote control, press the SET button. 4 Enter 3 digits of the VCR (Cable box or DVD player) code listed on next page for your brand of VCR (Cable box or DVD player). Make sure you enter 3 digits of the code, even if the first digit is a “0”. (If more than one code listed, try the first one.) 5 Press the POWER button. Your VCR (Cable box or DVD player) should turn on. If your VCR (Cable box or DVD player) turns on, your remote control is now set correctly. If your VCR (Cable box or DVD player) does not turn on, repeat steps 2, 3, and 4, but try one of the other codes listed for the brand of your particular VCR (Cable box or DVD player). 6 Once your remote control is set up, press the MODE button any time you want to use the remote to operate your VCR (Cable box or DVD player). NOTES •When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP, PLAY/PAUSE, and FF) will still operate your VCR (or DVD player). •When your remote control is in the STB, VCR, CABLE, or DVD mode, the volume buttons still control your TV’s volume. BP68-00513A-00Eng(030~053) 6/3/05 3:07 PM Page 36
English - 37 Remote Control Codes VCR Codes DVD Codes Cable Box Codes BP68-00513A-00Eng(030~053) 6/3/05 3:07 PM Page 37
Operation English - 38 Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) 1 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. 2 Press the …or †button to select “Time”, then press the ENTER button. Press the ENTER button to select “Clock”. 3Press the ENTER button to select “Clock Mode”. Press the …or † button to select “Manual”, then press the ENTER button. 4Press the …or †button to select “Clock Set”, then press the ENTER button. 5Press the œor √button to move to “Month”, “Day”, “Year”, “Hour”, “Minute”, or “am/pm”. Set the clock you want by pressing the …or † button, then press the ENTER button. Press the EXIT button to exit. Option 1: Setting the Clock Manually •You can set the month, day, year, hour and minute directly by pressing the number buttons on the remote control. Setup Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More MoveEnterReturn Input Picture Sound Channel Setup Listings Time --/ --/ ----/ -- : -- -- Clock√Sleep Timer : Off√On Timer : Inactivated√Off Timer : Inactivated√ MoveEnterReturn Input Picture Sound Channel Setup Listings Clock --/ --/ ----/ -- : -- -- Clock Mode :Auto Clock Set Time Zone DST : No MoveEnterReturn Input Picture Sound Channel Setup Listings Clock --/ --/ ----/ -- : -- -- Clock Mode : Manual√Clock Set√Time Zone√DST : No√ MoveEnterReturn Input Picture Sound Channel Setup Listings Clock Set MoveAdjustReturn Input Picture Sound Channel Setup Listings Enter the current date and time. HourMinute am/pm-- -- -- MonthDay Year▲--------▼ Manual Auto NOTE •The current time will appear every time you press the INFO button. BP68-00513A-00Eng(030~053) 6/3/05 3:07 PM Page 38
English - 39 Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. 2 Press the …or †button to select “Time”, then press the ENTER button. Press the ENTER button to select “Clock”. 3 Press the ENTER button to select “Clock Mode”. Press the …or †button to select “Auto”, then press the ENTER button. 4 Press the …or †button to select “Time Zone”, then press the ENTER button. Press the …or †button to highlight the time zone for your local area (and to move the highlight to the appropriate time zone on the map of the United States), then press the ENTER button. 5 Press the …or †button to select “DST”(Daylight Saving Time), then press the ENTER button. Press the …or †button to select “Yes” or “No”, then press the ENTER button. Press the EXIT button to exit. •When you set up Auto Time, the set time may not be correct depending on the broadcasting station and signal. If there is a difference between the real time and set time, please set the time manually. Setup Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More MoveEnterReturn Input Picture Sound Channel Setup Listings Time --/ --/ ----/ -- : -- -- Clock√Sleep Timer : Off√On Timer : Inactivated√Off Timer : Inactivated√ MoveEnterReturn Input Picture Sound Channel Setup Listings Clock --/ --/ ----/ -- : -- -- Clock Mode: Auto Clock Set Time Zone DST : No MoveEnterReturn Input Picture Sound Channel Setup Listings Clock --/ --/ ----/ -- : -- -- Clock Mode : Auto Clock Set Time Zone DST : No MoveEnterReturn Input Picture Sound Channel Setup Listings Time Zone MoveEnterReturn Input Picture Sound Channel Setup Listings Atlantic Eastern Central Mountain Pacific Alaska HawaiiSelect the time zone where you locate. Manual Auto Ye s No BP68-00513A-00Eng(030~053) 6/3/05 3:07 PM Page 39
Operation English - 40 Setting the On/Off Timer 1 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. 2 Press the …or †button to select “Time”, then press the ENTER button. Press the …or †button to select “On Timer”, then press the ENTER button. Press the …or †button to adjust “Hour”, then press the √button to move to the next step. Set other items using the same method as above. To activate On Timer with the setting entered, set Activation to “Yes” by pressing …or † button. When finished, press the MENU button to return. 3 Press the …or †button to select “Off Timer”, then press the ENTER button. Press the …or †button to adjust “Hour”, then press the √button to move to the next step. Set other items using the same method as above. To activate Off Timer with the setting entered, set Activation to “Yes” by pressing …or † button. When finished, press the EXIT button to exit. Setup Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More MoveEnterReturn Input Picture Sound Channel Setup Listings Time 1/ 1/ 2005/ 12 : 00 am Clock√Sleep Timer : Off√On Timer : Inactivated√Off Timer : Inactivated√ MoveEnterReturn Input Picture Sound Channel Setup Listings •You can set the hour, minute, channel, and volume directly by pressing the number buttons on the remote control. On Timer MoveAdjustReturn Input Picture Sound Channel Setup ListingsEnter the On Timer options. ChannelVolume Activation310 No Hour Minute am/pm Antenna▲12 00 am Air▼ Off Timer MoveAdjustReturn Input Picture Sound Channel Setup ListingsEnter the Off Timer options. Hour Minute am/pm Activation▲12 00 am No▼ NOTE •Auto Power Off When you set the timer “On”, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer “On” mode and prevents overheating or leakage, which may occur if a TV is on for too long (when you are on vacation, for example). BP68-00513A-00Eng(030~053) 6/3/05 3:07 PM Page 40