Samsung Hl-r5078w Dlp Tv Owners Instructions

English - 71
Selecting the Sound Source
You can use this feature to hear sound from the main or sub (PIP) picture.
1
Press the MENU button.
Press the …or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Sound Select”, then
press the ENTER button.
Press the …or †button to
select “Main” or “Sub”, then
press the ENTER button.
Press the EXIT button to exit.
Sound
Mode : Custom√Equalizer√SRS TSXT :  Off√Multi-Track Options√Auto Volume :  Off√Internal Mute :...

Picture Control
English - 72
Freezing the Picture
Press the STILL button to freeze a moving picture. (Normal sound will
still be heard.) 
Press again to cancel.
NOTE
•In the PIP mode, the main and sub pictures are stilled at the same
time.
BP68-00513A-00Eng(054~075)  6/3/05  3:09 PM  Page 72 

English - 73
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically replaces the
noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue
Screen” mode to “Off”.
1
Press the MENU button.
Press the …or †button to
select “Setup”, then press 
the ENTER button.
2
Press the …or †button to
select “Blue Screen”, then
press the ENTER button.
3
Press the …or †button to
select “On” or “Off”, then
press the ENTER...

SAMSUNG
BP68-00513A-00Eng(054~075)  6/3/05  3:09 PM  Page 74 

Sound Control
BP68-00513A-00Eng(054~075)  6/3/05  3:09 PM  Page 75 

Sound Control
English - 76
Sound Control
You can control and customize the sound levels and settings of the TV with the remote control.
Adjusting the Volume
Press the VOL+ or VOL– button to increase or decrease the volume.
Using the MUTE Button
At any time, you can temporarily
cut off the sound.
Press the MUTE button on the
remote control.
The message “Mute” is displayed
and the sound cuts off.
To turn mute off, press the MUTE
button again or press either the
VOL+ or VOL– button.
Customizing the Sound...

English - 77
3
Press the œor √button to select a
particular item to be changed.
Press the …or †button to increase or
decrease the selected frequency.
Press the EXIT button to exit.
Notes
•If you make any changes to the equalizer settings, the sound mode is automatically switched 
to the custom mode. 
•L/R Sound Balance Adjustment
To adjust the sound balance of the L/R speakers.
•Bandwidth Adjustment (100, 300, 1K, 3K, 10K)
To adjust the level of different bandwidth frequencies.
Using Automatic Sound...

Sound Control
English - 78
Setting the SRS TSXT
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. Trusurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully compatible
with all multichannel formats.
1
Press the MENU button.
Press the …or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “SRS...

English - 79
Auto Volume
Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume
every time the channel is changed. “Auto Volume” automatically adjusts the volume of the desired
channel by lowering the sound output when the modulation signal is high or by raising the sound 
output when the modulation signal is low.
1
Press the MENU button.
Press the …or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Auto Volume”,...

Sound Control
English - 80
Choosing a Multi-Channel Sound (MTS) track
The digital-TV transmission system is capable of simultaneous transmission of many audio tracks 
(for example, simultaneous translations of the program into foreign languages).
The availability of these additional “multitracks” depends upon the program.
1
Press the MENU button.
Press the …or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Multi-Track Options”,
then press the ENTER button.
3...