Samsung Hl-r4667w, Hl-r5067w, Hl-r5667w, Hl-r6167w Dlp Tv Owners Instructions

							English - 51
Fine Tuning Analog Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1
Press the MENU button. 
Press the …or †button to
select “Channel”, then press
the ENTER button. 
2
Press the …or †button to
select “Fine Tune”, then press
the ENTER button.
3
Press the œor √button to
adjust the fine tuning.
4
To store the fine tuning 
setting in the TV’s memory,
press the ENTER button. 
To reset the fine tuning
setting, press the †button to
select “Reset”, then press the
ENTER button.
5
Press the EXIT button to exit.
NOTE
•Only analog TV 
channels can be fine
tuned.
Channel
Antenna : Cable√Auto Program√Add/Delete√Channel List√Favorite Channels√Name√LNA : Off√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Channel
▲ More
Fine Tune√Signal Strength√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Fine Tune
Cable   26 Not Fine Tuned
0
MoveEnterReturn
Reset
Fine Tune
Cable   26 Not Fine Tuned
3
AdjustSaveReturn
Reset
Fine Tune
Cable   26 Fine Tuned
3
AdjustSaveReturn
Reset
Analog
BP68-00469A-02(030~053)  9/2/05  10:36 AM  Page 51 
						

							Channel Control
English - 52
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) 
channels have either perfect reception quality or you will not receive them at all. So, unlike analog 
channels, you cannot fine tune a digital channel.
You can, however, adjust your antenna to improve the reception of available digital channels.
1
Press the MENU button.
Press the …or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or †button to
select “Signal Strength”, then
press the ENTER button.
If the signal strength meter
indicates that the signal is
weak, physically adjust your
antenna to increase the 
signal strength. Continue to
adjust the antenna until you
find the best position with 
the strongest signal. 
Press the EXIT button to exit.
Channel
Antenna : Cable√Auto Program√Add/Delete√Channel List√Favorite Channels√Name√LNA : Off√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Channel
▲ More
Fine Tune√Signal Strength√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Signal Strength
EnterReturn Input
Picture
Sound
Channel
Setup
Listings
OK
Digital
BP68-00469A-02(030~053)  9/2/05  10:36 AM  Page 52 
						

							Picture Control
BP68-00469A-02(030~053)  9/2/05  10:36 AM  Page 53 
						

							Picture Control
English - 54
Picture Control
You can select the type of picture which best corresponds to your viewing requirements.
Changing the Picture Standard
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the ENTER button
again to select “Mode”.
3
Press the ENTER button.
Press the …or †button to
select the desired picture
mode (Dynamic, Standard,
Cinema), then press the
ENTER button.           
Press the EXIT button to exit.
•Choose “Dynamic” for viewing the TV during the day or when
there is a bright light in the room.
•Choose “Standard” for the standard factory settings.
•Choose “Cinema” when viewing a movie.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Mode
Mode : Standard√Contrast 90
Brightness 50
Sharpness 65
Color 55
Tint        G 50 R 50
Color Tone :  Warm1
√Reset
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Mode
Mode : Standard
Contrast 90
Brightness 50
Sharpness 65
Color 55
Tint        G 50 R 50
Color Tone :  Warm1
Reset
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Dynamic
Standard
Cinema
BP68-00469A-02(054~073)  9/2/05  10:37 AM  Page 54 
						

							English - 55
1
Press the MENU button. 
Press the …or †button to
select “Picture”, then press the
ENTER button.
2
Press the ENTER button to
select “Mode”.
3
Press the ENTER button.  
Press the …or †button to
select the desired picture mode
(Dynamic, Standard, Cinema),
then press the ENTER button.   
4
Press the …or †button to
select a particular option
(Contrast, Brightness,
Sharpness, Color, or Tint), 
then press the ENTER button.
Press the œor √button to
decrease or increase the value
of a particular item.
Continued...
Customizing the Picture Settings
You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”,
“Tint”, and “Color Tone” according to personal preference. You can select “Standard” which 
automatically recalls your personalized picture settings.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Mode
Mode : Standard√Contrast 90
Brightness 50
Sharpness 65
Color 55
Tint        G 50 R 50
Color Tone :  Warm1
√Reset
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Mode
Mode : Dynamic√Contrast 100
Brightness 45
Sharpness 75
Color 60
Tint        G 50 R 50
Color Tone :  Cool1
√Reset
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Mode
Mode : Standard
Contrast 100
Brightness 45
Sharpness 75
Color 60
Tint        G 50 R 50
Color Tone :  Cool1
Reset
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Dynamic
Standard
Cinema
▲Contrast▼90•You can also select these
options (Contrast, Brightness,
Sharpness, Color, or Tint) by
pressing the …or †button.
NOTES
•“Tint” doesn’t operate in HDMI or 480p Component or higher modes.
•The Tint cannot be adjusted while watching Digital TV.
BP68-00469A-02(054~073)  9/2/05  10:37 AM  Page 55 
						

							Picture Control
English - 56
5
Press the ENTER button to return to
“Mode”.
Press the …or †button to select
“Color Tone”, then press the ENTER
button.
6
Press the …or †button to select a 
particular option(Cool2, Cool1, Normal,
Warm1, or Warm2), then press the
ENTER button.
Press the EXIT button to exit.
NOTE
•Color tone is not available in the “Cinema” picture mode.
7To return the factory defaults, select
“Reset” by pressing the …or †button. 
Press the ENTER button.
•The previously adjusted settings will
be reset to the factory defaults.
Resetting the Picture Settings to the Factory Defaults
Mode
Mode : Dynamic√Contrast 100
Brightness 45
Sharpness 75
Color 60
Tint        G 50 R 50
Color Tone :  Cool1
√Reset
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Mode
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Color 60
Tint        G 50 R 50
Color Tone :  Warm1
Reset
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Cool2
Cool1
Normal
Warm1
Warm2
Mode
Mode : Dynamic√Contrast 100
Brightness 45
Sharpness 75
Color 60
Tint        G 50 R 50
Color Tone :  Cool1
√Reset
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
BP68-00469A-02(054~073)  9/2/05  10:37 AM  Page 56 
						

							English - 57
Changing the Picture Size
You can select the picture size which best corresponds to your viewing requirements.
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
Press the …or †button to
select “Size”, then press the
ENTER button.
2
Press the œor √button to
select the screen format you
want, then press the ENTER
button.
Press the EXIT button to exit.
Alternate method
Press the P.SIZE button on the remote control repeatedly to select one
of the picture size settings.
•“16:9”: Sets the picture to 16:9 wide mode.
•“Panorama”: Use this mode for the wide aspect ratio of a 
panoramic picture.
•“Zoom1”:  Magnifies the size of the picture on screen. 
•“Zoom2”: Magnifies the size of the picture more than “Zoom1”. 
•“4:3”: Sets the picture to 4:3 normal mode. 
This is a standard TV screen size.
NOTES
•You can select only the 16:9 and 4:3 screen sizes in the DTV or Component (720p, 1080i) mode.
•When Double (     ,     ) mode has been set in PIP, the Picture Size cannot be set.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Size
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
16:9Panorama Zoom1 Zoom2 4:3
BP68-00469A-02(054~073)  9/2/05  10:37 AM  Page 57 
						

							Picture Control
English - 58
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction 
feature to help reduce any static and ghosting that may appear on the screen.
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “Digital NR”, then
press the ENTER button.
3
Press the …or †button to
select “Off” or “On”, then
press the ENTER button.
Press the EXIT button to exit.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Picture
Mode : Standard
Size : 16:9
Digital NR : On
DNIe Demo : Off
My Color Control
Film Mode : Off
PIP
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
OffOn
BP68-00469A-02(054~073)  9/2/05  10:37 AM  Page 58 
						

							English - 59
Viewing the DNIe Demonstration
This TV includes the DNIe function so as to provide a high visual quality.
If you set DNIe Demo to On, you can view an applied DNIe and a normal picture on the screen, 
for demonstration purposes. Using this function, you can view the difference in the visual quality.
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “DNIe Demo”, then
press the ENTER button.
3
Press the …or †button to
select “Off” or “On”, then
press the ENTER button.
Press the EXIT button to exit.
Alternate method
Press the DNIe button on the remote control repeatedly to select one
of the settings.
•On: Switches on the DNIe Demo mode.
•Off: Switches off the DNIe Demo mode.
NOTE
•DNIeTM(Digital Natural Image engine)
This feature brings you more detailed image with 3D noise
reduction, detail enhancement, contrast enhancement and
white enhancement.
DNIe Demo
DNIe OnDNIe Off
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Picture
Mode : Standard
Size : 16:9
Digital NR : On
DNIe Demo : Off
My Color Control
Film Mode : Off
PIP
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Off
On
BP68-00469A-02(054~073)  9/2/05  10:37 AM  Page 59 
						

							Picture Control
English - 60
Setting the My Color Control Mode
My Color Control allows you to adjust colors according to your preference, by adjusting skin, sky,
and grass tones using the predefined settings (“Blue”, “Green”, “Pink”, “Standard”, and “Custom”)
without affecting other colors on the screen.
Using the Easy Control Menu
1Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “My Color Control”,
then press the ENTER button.
3
Press the ENTER button to
select “Easy Control”.
Press the œor √button to
select one of the picture 
settings you want.
The original picture (before
adjustment) is shown
on the left side, while the
selected mode is shown
on the right side.
Press the ENTER button to
accept the selected mode.
Press the EXIT button to exit.
•“Blue”: Emphasizes Clear Blues.
•“Green”: Emphasizes Mild Greens.
•“Pink”: Emphasizes Warm Skin Colors.
•“Standard”: Standard Picture.
NOTE
•Changing the settings
in the “Detail Control”
menu (see next page)
will automatically set
the My Color Control
mode to “Custom”.
œ√
Easy Control
MoveReturnEnter
OriginalCustom
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Listings
My Color Control
Easy Control : Custom√Detail Control√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Listings
StandardCustom
BP68-00469A-02(054~073)  9/2/05  10:37 AM  Page 60