Samsung H710 User Manual

							Owners InstructionsSP-H700/H710/H500
Downloaded From projector-manual.com Samsung Manuals 
						

							Connections and Source Setup
Before Connections............................................22
Connecting to Video Equipment
Connecting to VCR/Camcorder/Cable Box ..........23
Connecting to DVD ............................................24
Connecting to the Digital TV Receiver..................25
Setting up the External Input Source................26
Naming the External Connections....................27
Preparation
Features and Design..............................................4
Caution on Lamp Use and Replacement..............5
Projector and Accessories 
Front/Upper Side and Accessories ........................8
Rear Side and Cables ........................................10
Remote Control Buttons ....................................11
Operating the Remote Control............................12
Installation and Basic Adjustments
Installation and Turning On  ..............................14
Zooming and Focus Adjustment..........................16
Leveling with Adjustable Feet ............................17
Using the Lens Shift Dial ....................................18
Screen Size and Projection Distance....................19
Preparation
Table of Contents
2
Table of Contents
Setup
Flipping/Reversing the Projected Image........44
Light Setting........................................................45
Correcting Vertical Keystone............................46
Test Patterns......................................................47
Restoring the Factory Default Settings............48
Information..........................................................49
Picture Adjustment 
Selecting Picture Mode......................................30
Custom Settings of the Picture..........................31
Changing the Color Standard............................32
Selecting and Adjusting Color Temperature....33
Gamma Correction..............................................34
Saving Custom Picture Settings........................35
Setting up DNle..................................................36
Selecting Picture Size..........................................37
Screen Position Adjustment..............................39
Film Mode............................................................40
Overscan..............................................................41
Still Picture..........................................................42
Downloaded From projector-manual.com Samsung Manuals 
						

							Preparation
Table of Contents
3
Menu Option
Setting the Language..........................................52
Setting the Menu Position..................................53
Setting the Menu Translucency..........................54
Setting the Menu Display Time..........................55
Selecting Quick Menu..........................................56
Connecting to PC
Before Connecting to PC....................................58
Setting up the PC Environment..........................59
Connecting to PC..................................................60
Automatic Picture Adjustment..........................62
Frequency Adjustment........................................63
Fine Tuning with the Phase Adjustment..........64
Zooming the Screen............................................65
Reset the PC........................................................66
Troubleshooting
Before Contacting Service Personnel................68
Other Information
Storage and Maintenance..................................72
Purchasing Optional Parts..................................73
Structure of Screen Menu..................................74
Lamp Replacement..............................................77
RS-232C Connection and Control......................78
Specifications......................................................80
Remote Control Specifications..........................81
Downloaded From projector-manual.com Samsung Manuals 
						

							Preparation
Features and Design
4
Features and Design
SP-H700/SP-H710: DLPTMHD2+
DMD panel capable of 1280x720  resolution
SP-H500: DLPTMED2+
DMD panel capable of 1024x576 resolution
5X-speed color wheel designed to reduce digital artifacts
250W Lamp designed to improve luminance
Optical engine adopting advanced DLP technology
Quality picture tuning focused on improving color - this unit aims at
realizing color coordinates that meet broadcasting standards on
video production.
Vivid colors
The airflow and fan installation structure are optimized to minimize
fan noise and beam leakage.
Minimized fan noise and light leakage
Five types of input ports including a DVI-D (compatible with HDCP)
port, two Component ports improve connection to external
peripherals.
Various Input Ports
This unit allows adjustment of each input port.
The unit has a reference pattern that can be used for positioning and
adjustment.
The remote control is backlit to improve usability in a dark
environment.
User adjustments
Downloaded From projector-manual.com Samsung Manuals 
						

							Caution on Lamp Use and Replacement
Preparation
Caution on Lamp Use and Replacement
5
The Projector lamp changes in nature depending on time of use and
using environment. Refer to the installation and other
recommended operational sections of the user’s manual to avoid
rapid degradation of performance and deterioration of picture
quality. The projector lamp requires regular replacement.
Free servicing will be offered within 90 days after purchasing of the
product and within 300 hours of product use, if the problem is due
to a defective lamp.
You can check the lamp use time by pressing the INFObutton on
the remote control.
Projector Lamp
Unplug the power cord before replacing the lamp.
Inside of the projector is very hot. Cool off the projector for at least
an hour after turning off.
Contact your dealer to purchase a lamp for replacement. 
(Ultra violets from the lamp can damage your eyes.)
Turn off the power of the lamp before replacement or repair.
(Due to the high-pressure of the lamp, it is possible to explode.)
When the lamp is broken, be careful not to be hurt by glass pieces.
Refer to the manual for proper handling.
Caution on Lamp Replacement
This projector produces intense light. Do not stare light source
directly. 
Do not touch the exhaust vent during operation. It can be very hot.
Do not expose the unit to rain or moisture.
Caution on Lamp Use
Downloaded From projector-manual.com Samsung Manuals 
						

							Downloaded From projector-manual.com Samsung Manuals 
						

							Preparation
Projector and Accessories............................8
Installation and Basic Adjustments..........14
VISUAL REALISM
Downloaded From projector-manual.com Samsung Manuals 
						

							Front/Upper Side 
PROJECTOR AND ACCESSORIES
Front/Upper Side and Accessories
Preparation
Projector and Accessories
8
1 1Indicators-TEMP (Red LED)-LAMP (Blue LED)-STAND BY (Blue LED)Refer to page 9 for details.
2 2Remote Control Signal Receiver
3 3Focus RingUsed for Focus Adjustment.
4 4Lens
5 5Adjustable FeetYou can adjust the screen position by moving
up and down the adjustable feet.
6 6Zoom KnobUsed to enlarge or reduce image size.
7 7MENUUsed to open the on-screen Menu.
8 8POWERUsed to turn the projector on or off.
9 9SOURCEUsed to select input signals from the external
sources.
1 10
0Select and Move ButtonUsed to select an menu item, and to move the
cursor.
1 11
1LENS SHIFT DialYou can adjust screen images up and down
within the lens range.
Remote Control/
2 Batteries Power Cable  Owners Instructions
1
2
3
4
5
6
7891011
Accessories
Downloaded From projector-manual.com Samsung Manuals 
						

							Preparation
Projector and Accessories
9
: Turned On      : Flashing      : Turned Off
STANDBY LAMP TEMPInformation
If you press the POWERbutton on the remote control or projector, the screen
appears within 30 seconds.
The projector is in normal operating condition.
The projector is warming up after 
POWERbutton has been pressed.
The 
POWERbutton is pressed to turn off the projector, and the cooling system is
in operation to cool off inside of the projector. (Lasts for about 1 minute and 30
seconds) 
Refer to measure 1 below if the cooling fan inside the projector is not in normal
operation condition.
Refer to measure 2 below if the lamp cover protecting the lamp unit is not closed
properly.
Power is turned off automatically when temperature inside of the projector goes
beyond the control limit. Refer to measure 3.
Refer to measure 4 below if the life span of the lamp is running out or a problem
with the lamp is detected.
When the cooling fan system is
not in normal operating condition.
When the lamp cover protecting
the lamp unit is not properly
closed or the sensor system is not
in normal operating condition.
When temperature inside of the
projector becomes too high.
The lamp is malfunctioning after
abnormal power off or restarting
right after turning off the projector.
When brightness of the picture
screen degrades or image
deterioration is found.Unplug and plug the cord and restart the projector. If the
problem does not disappear, contact a dealer or service
personnel near you.
Check the screw on the bottom side of the projector. If you
do not find any problem, contact a dealer or service
personnel near you.
Adjust the position of the projector following the
installation instructions of this manual and cool off the
projector before restarting it. If the problem does not
disappear, contact a dealer or service personnel near you.
Power off the projector and cool it off for some time before
restarting it.
Check how long the lamp has been used on Information
and contact a dealer or service personnel near you for lamp
replacement.Measure 1
Measure 2
Measure 3
Measure 4
Indicator Information
Classification State Measures
Clearing Indicator Problems 
NOTE
This Projector uses a cooling fan system to keep the unit from overheating. 
Operation of the cooling fan may cause noise, which does not affect the product performance. 
No exchange or refund for the noise concern.
Downloaded From projector-manual.com Samsung Manuals 
						

							Preparation
Projector and Accessories
10
PROJECTOR AND ACCESSORIES
Rear Side and Cables
Rear Side
Power CordConnected to the wall
outlet ∏. 
Video (COMPOSITE) Cable Connected to the
connection port ˇ.
S-Video CableConnected to the
connection port ´.
Component CableConnected to the
connection port ’.
PC Video CableConnected to the
connection port Ø.
DVI-D CableConnected to the
connection port ˆ.
1 1Remote Control Signal Receiver 
2 2S-VIDEO Input port
3 3COMPOSITE Input ports
4 4RS-232C port
5 5DVI Input port
6 6PC Input port
7 7AC Power Input
8 8Power Switch
9 9Component Input port
12345
7
6
98
Cables
Downloaded From projector-manual.com Samsung Manuals