Samsung H03 User Manual

							Installation and Connection2-2
2-2 Connecting and Disconnecting the Battery
Connecting the Battery
 Align and fasten the grooves on the bottom of the projector with the counterparts on the battery.
 Push the top and back of the projector forward simultaneously until you hear a click.
Disconnecting the Battery
 Press the lock, marked [PUSH] , on the back of the battery.
 With the lock held down, lift the back of the projector.
Downloaded From projector-manual.com Samsung Manuals 
						

							2-3Installation and Connection
2-3 Zoom and Focus Adjustment 
Move the [FOCUS] slide bar left or right until the picture is clear.
 The size of your screen determines the dist ance you set your projector from the screen.
If you do not place your projector at the projection distance  specified in the Screen Size and Projection Distance table in 
Section 2-4, you will not be able to adjust the focus correctly.
 
FOCUS
Downloaded From projector-manual.com Samsung Manuals 
						

							Installation and Connection2-4
2-4 Screen Size and Projection Distance 
If the picture is not clear, adjust [FOCUS], or move the projector forward or backward.
SCREEN SIZE
Z (THROW DISTANCE)
M (DIAGONAL)X (HORIZONTAL)Y (VERTICAL)
INCHESCMINCHESCMINCHESCMINCHESCM
8.6 21.8 7.519.0 4.210.7 12.030.5
10 25.4 8.722.1 4.912.5 14.035.5
17.2 43.715.038.1 8.421.4 23.8 60.5
34.3 87.129.975.916.842.747.4120.5
57.2 145.3 49.9126.6 28.071.278.8200.1
85.5 217.2 74.5189.3 41.9106.5 117.7 299
90°
Z Y
X
M
Y
Z: Throw Distance
Projector
Screen: Side view Screen: Front view
Downloaded From projector-manual.com Samsung Manuals 
						

							2-5Installation and Connection
2-5 Ventilation openings
Ventilation openings
For the location of the ventilation openings, see the picture below: 
• Do not block the ventilation openings. Blocking the ventilation openings can cause your projector to overheat and may cause 
it to fail.
NAME DESCRIPTION
,  Exhaust vents
Air outtake vent
, ,  Intake vents
Air intake vent
Downloaded From projector-manual.com Samsung Manuals 
						

							Installation and Connection2-6
2-6 Supported Display Modes
2-6-1. PC Timing (D-Sub)
 All resolutions higher or lower than 854 x 480 are converted to 854 x 480 by the scaler chip in the projector. To obtain an 
optimal picture, the resolution from the PC should be similar to the projector (854 x 480).
 
2-6-2. AV Timing (VIDEO)
NTSC, NTSC 4.43, PAL, PA L60, PAL-N, PAL-M, SECAM
FORMATRESOLUTION
HORIZONTAL 
FREQUENCY
(KHZ)VERTICAL 
FREQUENCY  (HZ)PIXEL 
FREQUENCY  (MHZ)
 IBM  640 x 480  60Hz 31.469 59.9425.175
 VESA 800 x 600  60Hz 37.879 60.317 40
 VESA 1024 x 768  60Hz 48.363 60.004 65
 VESA 720 x 576 60Hz 35.91 59.95 32.75
EIA-861B  720 x 48060Hz 31.5 6027.027
 VESA 1280 x 800  60Hz 49.702 59.81 83.5
 VESA  1280 x 768 60Hz 47.776 59.87 79.5
 VESA  1280 x 720  60Hz 47.772 59.855 74.5
Downloaded From projector-manual.com Samsung Manuals 
						

							2-7Installation and Connection
2-7 Ports
2-7-1. Rear View
 Open the cover on the back of the projector. 
 The maximum memory capacity supported for a USB memory device is 16 GB.
(The maximum capacity supported for external memory is based on our factory test. Your experience may differ depending 
on the manufacturer of the memory device.)
 
ICONNAME
PC IN port
AV IN port
 Power port
 USB port
 Audio output port
PC IN AV IN
Downloaded From projector-manual.com Samsung Manuals 
						

							Installation and Connection2-7
2-7-2. Side View
 The maximum memory capacity supported for a MicroSD(HC) card is 32 GB.
(The maximum capacity supported for external memory is based on our factory test. Your experience may differ depending 
on the manufacturer of the memory device.)
 
ICONNAME
MicroSD(HC) card slot
FOCUS
Downloaded From projector-manual.com Samsung Manuals 
						

							2-8Installation and Connection
2-8 Connecting with a PC and Setting up the PC
2-8-1. Setting up the PC Environment 
Check the following items before connecting your PC to your projector.
1.Click the right mouse button on the Windows desktop, and then click [Properties]. 
The  dialog appears.
2. Click the [Settings] tab, and then set the . The optimal resolution for the projector is 800 x 600. For othe r 
resolutions supported by the projector, see the PC Timing Display Mode table in section 2-6.
 You do not have to change the  setup. 
3. Press the [Advanced] button. Another property window appears.
4. Click the [Monitor] tab and set the . For the refresh rate that matches the resolution you’ve chosen, see 
the refresh rate (60 Hz, 70 Hz, etc.) next to your selected resolution in the PC Timing Display Mode table in section 2-6. 
 Setting the refresh rate sets both the vertical and horizontal frequencies. 
5. Click the [OK] button to close the window, and then click the [OK] button on the  window to close that 
window.
6. Shut down the PC and connect it to the projector.
1
2
3
4
Downloaded From projector-manual.com Samsung Manuals 
						

							Installation and Connection2-8
• The setup process might vary depending on your type of computer or version of Windows. 
(For example, [Properties] appears instead  of [Properties (R)] as shown in 1.)
• This projector supports 32 bit color quality (per pixel) when it is used as a PC monitor.
• Projected images may differ from the images on your monitor depending on the monitor manufacturer or Windows  version.
• When connecting the projector to a PC, make sure that the PC setup complies with the display settings supported by  this projector. If it does not, you may have signal problems.
 
2-8-2. Connecting with a PC 
Make sure that your PC and projector are turned off.
1.Connect the D-Sub Gender Cable to [ PC IN] on the back of the projector and RGB on the PC.
Refer to PC Timing (D-Sub) in the Supported Display Modes section for information on supported input signals. 
2. Plug in the power cords of the projector and the PC.
 
Using the Projector 
1. Turn on the projector and select   
: .
If you cannot select  mode, check that the D-Sub Gender Cable is properly connected.
2. Turn on the PC, and then set the PC Environment (screen resolution, etc.) if necessary. 
3. Adjust the screen. 
RGB
PC IN AV IN
Downloaded From projector-manual.com Samsung Manuals 
						

							2-9Installation and Connection
2-9 Connecting to an AV Device
Make sure that the AV device and your projector are turned off.
1.Insert the 3RCA gender adaptor into the [ AV IN] port on the back of the projector.
2. Connect a video cable and audio cable to the 3RCA gender adaptor.
Refer to AV Timing (VIDEO) in the Supported Display Modes section for information on supported input signals.
3. Connect the video cable to the VIDEO OUT port on the AV device.
Connect the audio cable to the AUDIO OUT port on the AV device.
 Video and audio cables are sold separately. 
AUDIO OUT
VIDEO OUT
PC IN AV IN
Downloaded From projector-manual.com Samsung Manuals