Samsung Gusto 1 Owners Manual

							36Voice Commands SettingsYou can adjust the settings and preferences by opening Voice 
Commands menu. Using this menu, you can change the 
following Voice Command features:1.
From the Home screen, press and hold the
  Voice Recognition 
Key. 
– or –With the flip closed, press and hold the 
 Speakerphone Key
.
2.
Press the 
Right Soft Key
  
Settings
. Select a setting for 
customization:

: Choose 
On to have the phone read the text in a 
TXT message, or 
Off for no readout.
 Confirm Choices
: Choose whether the phone prompts you with a 
list of potential matches to your voice command. Select 
Automatic
, 
Always Confirm
, or Never Confirm
.
 Sensitivity
: Select a setting:
–More Sensitive
 if the phone frequently does not recognize names, 
numbers, or commands.
–Automatic
 for the default sensitivity level.
–Less Sensitive
 if the phone frequently recognizes a command even if 
you said nothing.
 Adapt Voice
: Train Voice Commands to recognize your voice.

: Select settings for voice command prompts.
–Mode
: Select the level of audio guidance you prefer, from 
Prompts
, 
Readout+Alerts
, Readout
, or To n e s  O n l y
.
–Audio Playback
: Control whether audio is played through the 
speakerphone or earpiece.
–Timeout
: Control how long the Voice Commands system listens for a 
command from you. Choose 
5 seconds
 or 10 seconds
.
 Key Settings
: Select the method for launching Voice Commands.
–Choose 
Voice Key Only
 to launch with the Voice Commands key(s).
–Choose 
Voice Key/Ear Mic
 to launch with the Voice Commands 
key(s), OR with headset controls when you attach an optional headset.
–Choose 
Voice Key/Flip
 to launch with the Voice Commands key(s), OR 
by flipping the phone open.
 About
: View information about Voice Commands.
Tip: For most settings, you can press the 
Left Soft Key
 Info for more 
information about the setting. 
						

							Call Functions       37
Fake CallUse Fake Call to have your phone ring with a fake call when you 
press the 
 Speakerphone Key 
4 times in a row.
Setting up Fake CallsEnable, and choose options, for Fake Calls.1.
From the Home screen, press   
MENU
 ➔ 
 Settings 
& Tools  
➔ Call Settings  
➔ Fake Call
.
2.
Follow these steps to set up Fake Calls: Enable Fake Calls
: In the Fake Call On/Off setting, choose 
On to 
enable the Fake Call feature.
 Set the Fake Call Timer
: Choose the length of time to elapse 
between the time you press the Speakerphone Key four times and 
the ringing of the Fake Call.  Choose 
5 seconds
, 10 Seconds
, 30 
Seconds
, 1 Minute
, or 3 Minutes
.
 Choose a Fake Call Voice
: Choose 
No Voice
 to have no audio 
through the earpiece when you answer a Fake Call, or 
Use Fake 
Call Voice
  to choose a sound to play through the earpiece when 
you answer a fake call.
 Fake Contact Info
: Enter fake contact information to appear in the 
phone’s display when a Fake Call is ringing, or choose Restricted to  
have the Fake Call appear to be from a Restricted number.
Initiating a Fake Call
From idle mode with the phone closed, press the 
 
Speakerphone Key 
4 times.
After the Fake Call Timer period elapses, your phone rings to 
notify you of the fake call. If you entered Fake contact Info, it 
appears on the screen, or “Restricted” appears. 
When you answer the Fake Call, you’ll hear the Fake Call Voice 
audio, if you selected it in Fake Call settings. 
						

							38Driving ModeWhen Driving Mode is enabled, your phone uses sounds to alert 
you to notifications, regardless of other phone or call settings.
For example, when you receive a call or message, your phone 
reads out the caller’s (or sender’s) name and number, and Call 
Alert sounds will play, even if you have set Master Volume to 
Sounds Off or Vibrate Only.Enabling Driving Mode with Voice Commands1.
From the Home screen, press and hold the
  Voice Recognition 
Key. 
– or –With the flip closed, press and hold the 
 Speakerphone Key
.
2.
At the audio prompt “
Please say a command
”, say “
Tu r n  
Driving Mode On
”.
Enabling Driving Mode in Settings1.
From the Home screen, press   
MENU
 ➔ 
 Settings 
& Tools 
➔ Sounds Settings 
➔ Driving Mode
.
2.
Choose 
On.  
						

							Entering Text       39
Section 4: Entering TextYour phone provides convenient ways to enter words, letters, 
punctuation, and numbers when you need to enter text. This 
section describes text input modes and entering characters or 
symbols, using the keypad.
Your phone offers these text entry modes:T9 Word
: English predictive text
Palabra
: Spanish predictive text
Abc/ABC/abc
: Standard text entry for phones
123: Numbers
Symbols
: Common text symbols
Quick Text
: Pre-entered phrases (text fields only)
Domain extensions
: Common internet phrases and symbols
Note: 
 Available text entry modes will depend on the type of field.
Changing the Text Entr y ModeWhile entering text, you can change the text entry mode to your 
preference.Tip: You can set a default Text Entry Mode. For more information, see “Messaging Settings” on page 55.
While entering text, press the 
Left Soft Key
  Entry 
Mode, then use the 
Directional Key
   to highlight a 
mode and press   to select the mode.
Note: 
 Available text entry modes will depend on the type of field. When you are entering text, the 
Right Soft Key
 shows the current text entry mode. 
						

							40Entering Text Using T9 WordT9 Word is a predictive text entry mode that recognizes common 
English words matching the sequence of your key presses and 
inserts the most common word into your text. T9 Word requires 
only one key press per letter of the word, and is much faster than 
traditional text entry.
To switch to T9 Word mode, press the 
Left Soft Key
 
 
Entry Mode
 ➔ T9 Word
.
While entering text:
Press the key for each letter only once.Enter the entire word before editing or deleting characters. Press 
 to backspace and clear one character, or press and hold 
to clear an entire word.
If T9 Word inserts the wrong word, press   to toggle between 
other matching words.Press   to switch between T9 Word (initial case), T9 word (lower 
case) and T9 WORD (upper case).To enter a space, press  .Press   once to enter a period, twice to enter 
:), or three times to 
enter 
:-).
Press and hold any key to enter the number on the key.
Entering Text using PalabraPalabra is a predictive text entry mode for Spanish that 
recognizes common words matching the sequence of your key 
presses and inserts the most common word into your text. 
Palabra requires only one key press per letter of the word, and is 
much faster than traditional text entry.
To switch to Palabra mode, press the 
Left Soft Key
 Entry Mode
 ➔ Palabra
.
While entering text:
Press the key for each letter only once.Enter the entire word before editing or deleting characters. Press 
 to backspace and clear one character, or press and hold 
to clear an entire word.
If Palabra inserts the wrong word, press   to toggle between 
other matching words.Press   to switch between PalabraT9 Word (initial case), palabra 
(lower case) and PALABRA (upper case).To enter a space, press  .Press   once to enter a period, twice to enter 
:), or three times to 
enter 
:-).
Press and hold any key to enter the number on the key. 
						

							Entering Text       41
Entering Text using Abc ModeAbc mode is standard text entry mode for mobile telephones.
To switch to Abc mode, press the 
Left Soft Key
 
 
Entry Mode
 ➔ Abc
.
While entering text:
Press the appropriate key once for the first letter on the key, twice for 
the second letter, three times for the third letter, and four times for the 
fourth letter.When the correct letter displays, pause briefly to advance to the next 
letter, or press another key.Press 
 to backspace to clear one character. Press and hold to 
clear an entire word.
Press   to switch between Abc (initial case), abc (lower case) 
and ABC (upper case).To enter a space, press  .Press   once to enter a period, twice for an ampersand “@”, 
three times for a question mark “?”, and four times for an exclamation 
mark “!”.Press and hold any key to enter the number on the key.
Entering NumbersUse 123 mode to enter numbers into a text field.
To switch to 123 mode, press the 
Left Soft Key
 
 
Entry Mode
 ➔ 123.
While entering numbers:
Press the appropriate key for each number.Press 
 to backspace to clear one number. Press and hold to clear 
multiple numbers in a string.
Entering SymbolsUse Symbols mode to enter common symbols into a text field.
To switch to Symbols mode, press the 
Left Soft Key
 
 
Entry Mode
 ➔ Symbols
.
To enter symbols:
Use the 
Directional Key
   to highlight a symbol, then press   
to insert it. 
There are three pages of symbols. Press the 
Left Soft Key
  
Prev
 to 
move to the previous page, or the 
Right Soft Key
 
 Next
 to move to 
the next page of symbols.
Tip: You can also press the key for the number corresponding to a symbol. 
						

							42Entering Quick TextUse Quick Text mode to insert pre-loaded messages into a text 
message, or to create and insert  your own Quick Text phrases.
To switch to Quick Text mode, press the 
Left Soft Key
 
 
Entry Mode
 ➔ Quick Text
.
While in Quick Text mode:
Press the 
Directional Key
   to highlight a  phrase, then press 
 to insert the Quick Text.
To erase a Quick Text phrase, use the 
Directional Key
  to 
highlight a  phrase, then press the 
Left Soft Key
 
 Erase
.
Press the 
Right Soft Key
 
 Options
 for these options:
–New
: Create a new phrase.
–Edit: Modify the highlighted phrase.
–Move
: Change the order of the phrases.
Entering Domain ExtensionsUse Domain Extensions to insert common internet symbols or 
phrases, such as @, .com, or .verizon.com.
To switch to Domain Extensions mode, press the 
Left Soft 
Key
  
Entry Mode
 ➔ Domain Extensions
.
While in Domain Extensions mode:
Press the 
Directional Key
   to highlight a phrase, then press 
 to insert the Domain Extension.
To erase a Domain Extension, use the 
Directional Key
  to 
highlight a phrase, then press the 
Left Soft Key
 
 Erase
.
Press the 
Right Soft Key
 
 New
  to create a new Domain Extension 
						

							Messaging       43
Section 5: MessagingThis section explains how to send and receive messages, and 
other features and functionality associated with messaging.Types of MessagesYour phone can send and receive:Text MessagesPicture MessagesVoice MessagesMobile IMsEmailChat 
Creating and Sending Text MessagesText Messages are simple messages containing text, which can 
be send to another mobile phone or to an Email address. Your 
phone also supports Enhanced Text Messages, which can 
contain specific types of pre-loaded attachments such as 
sounds, graphics, animations, and name cards.
Text messages are also known as SMS (Simple Messaging 
Service) messages.1.
From the Home screen, press the 
Left Soft Key
 
 
Message
 ➔ New Message
 ➔ TXT Message
. 
2.
At the 
NEW TXT MESSAGE
 screen, enter up to 10 recipients 
in the 
To :  fields:
Press the 
Right Soft Key
  
 Add to select recipients from:
–From Contacts
: Choose contacts from the Contacts List.
–Recent Calls
: Choose numbers from Recent Calls.
–Groups
: Choose a contacts Group.
Use the keypad to enter a recipient’s phone number, contact name, 
or Email address. As you enter characters, matching contacts 
display in a list. Use the 
Directional Key
   to highlight a 
contact, then press  . 
						

							443.
Use the 
Directional Key
   to move to the 
Te x t :
 field to 
compose your message. For more information about 
entering text, see “Entering Text” on page 39.
4.
While entering text, press the 
Right Soft Key
  
Options
 for 
these options:

: Insert a pre-loaded phrase. For more 
information, see “Entering Quick Text”
 on page 42.
 Save As Draft
: Save a copy of the message in the Drafts folder.

: Add a Graphic, Animation or Sound from media pre-loaded on 
your phone, a contact’s Name Card, or Contact Number/Email. 
(Text messages that only have Email addresses as recipients can 
only include a Contact Number/Email.)

: Change the Alignment, Font Size, Font Style, Text 
Color, and Background Color. (Not available for text messages that 
have Email addresses as recipients.)
 Priority Level
: Set the urgency of the message, to High or Normal.
 Callback #
: Include a callback number with the message. By 
default, this is your mobile telephone number, or you can enter a 
different number. For more information, see 
“Messaging 
Settings”
 on page 55.
 Cancel Message
: Cancel the message, with the option to save it 
in the Drafts folder.
5.
Press  
SEND
, or   to send the message.
Creating and Sending Picture MessagesNote: Only available within Verizon Wireless Enhanced Services Area.Picture Messages combine text, pictures, and sound, and can be 
sent to other mobile phones, to Email addresses, to your Online 
Album, or to a blog.
Picture Messaging is also known as MMS (Multimedia Messaging 
Service).1.
From the Home screen, press the 
Left Soft Key
 
  
Message
 ➔ New Message
 ➔ Picture Message
.  
2.
At the 
NEW PICTURE MSG
 screen, enter recipients:
Press the 
Right Soft Key
  
Add to select recipients from:
–From Contacts
: Choose contacts from the Contacts List.
–Recent Calls
: Choose numbers from Recent Calls.
–Groups
: Choose a contacts Group.
–To Online Album
: Send the message to your Online Album.
–To  B l o g s
: Send the message to a blog.
Use the keypad to enter a recipient’s phone number, contact name, 
or Email address. As you enter characters, matching contacts 
display in a list. Use the 
Directional Key
   to highlight a 
contact, then press  .
SENDSEND 
						

							Messaging       45 3.
Use the 
Directional Key
   to move to the 
Slides
 field. 
Pictures you attach are placed on 
Slides
. Use the 
Directional Key
 to navigate between slides, or press the 
Right Soft Key
  
Options
 to choose 
Add Slide
.
4.
Use the 
Directional Key
   to move to the 
Te x t :
 field, 
then compose your message. For more information about 
entering text, see “Entering Text” on page 39. While 
entering text, press the 
Right Soft Key
  
Options
 for these 
options:

: View the message before sending.
 Save As Draft
: Save a copy of the message in the Drafts folder.

: Insert a pre-loaded phrase.
 Priority Level
: Set the urgency of the message, to High or Normal.
 Add Slide/Remove Slide
: Add a second slide to the message, or 
delete the current slide from the message.
 Cancel Message
: Cancel the message, with the option to save it 
in the Drafts folder.
5.
Use the 
Directional Key
  to move to the 
Picture:
 field, 
then press the 
Left Soft Key
    
My Pics
 for these options:
Use the 
Directional Key
 
to highlight a picture from My 
Pictures, then press   to attach the picture, or press the 
Right 
Soft Key
  
Options
 for these options:
–Ta k e  P i c t u r e
: Launch Camera to capture a new picture.
–Get New Pictures
: Download new pictures.
–Rename
: Change the name of the highlighted picture.
–File Info
: View information about the highlighted picture.
While adding a picture, press the 
Right Soft Key
    
Options
 for 
these options:
–Preview
: View the message before sending.
–Save As Draft
: Save a copy of the message in the Drafts folder.
–Add Slide
: Insert a new slide for a new picture.
–Priority Level
: Set the urgency of the message, to High or Normal.
–Add Slide/Remove Slide
: Delete the current slide.
–Cancel Message
: Cancel the message, with the option to save it in 
the Drafts folder.