Samsung Flight 2 User Manual

							Changing Your Settings       57
Editing the Outdoor - Message Profile1.
Touch  
➔ Settings 
➔ Sound Profile 
➔ Outdoor
.
Touch   to the right of the radio button.
2.
Touch the drop-down menu (upper-right of the screen) and 
select 
Message.
3.
Touch the 
Message alert type
 field, select one of the 
following and touch 
Save
:

: the phone rings using the ring melody selected in the Ring 
tone menu.

: the phone vibrates but does not ring.
 Vibration & Melody
: the phone vibrates and plays a melody 
simultaneously.

: the phone is silent and does not play a melody or vibrate.
4.
Touch the 
Message alert tone
 field, then touch to select 
Message tone 1 
through
 Message tone 6
 and touch 
Save
.
5.
Touch the 
Message alert repetition
 pull-down and select 
one of the followi ng options and touch 
Save
:

: repeats the message alert once.

: repeats the message alert periodically.
6.
Drag the 
Alert tone volume
 slider to the volume level you 
desire (range is 1 through 7).
7.
Touch the 
Vibration pattern
 field, then touch to select 
Vibration 1
 through
 Vibration 3 
and touch 
Save
.
8.
Touch 
Save
 to return to the Sound Profile menu.
Editing the Outdoor - Phone Profile1.
Touch  
➔ Settings 
➔ Sound Profile 
➔ Outdoor
.
Touch   to the right of the radio button.
2.
Touch the drop-down menu (uppe r-right of the screen) and 
select 
Phone.
3.
Touch the 
Keypad tone
 pull-down and select one of the 
following tones and touch 
Save
:

 Glossy

4.
Touch the 
Power-on type
 field, select one of the following 
and touch 
Save
:

: the phone rings using the ring melody selected in the Ring 
tone menu.

: the phone vibrates but does not play a melody.
 Vibration & Melody
: the phone vibrates and plays a melody 
simultaneously.

: the phone is silent and does not play a melody or vibrate. 
						

							585.
Touch the 
Power-off type
 field, select one of the following 
and touch 
Save
:

: the phone rings using the ring melody selected in the Ring 
tone menu.

: the phone vibrates but does not ring.
 Vibration & Melody
: the phone vibrates and plays a melody 
simultaneously.

: the phone is silent and does not play a melody or vibrate.
6.
Drag the 
Phone sound volume
 slider to the volume level you 
desire (range is 0 through 7).
T ouch 
Save
 to return to the Sound Profile menu.
Display and Light SettingsIn this menu, you can change va rious settings for the display or 
backlight.1.
From Idle mode, touch   
➔ Settings
 ➔ Display and 
Light
.
2.
Select one of the following options:WallpaperWidgetFont typeGreeting message
BrightnessBacklight time
WallpaperThis menu allows you to change the background image displayed 
on the Main screens.1.
From Idle mode, touch   
➔ Settings
 ➔ Display and 
Light
 ➔ Wallpaper.
2.
Touch a panel that corresponds  to the Main screen that 
you want to change.
3.
Touch 
Pictures
, scroll through the pi ctures, and touch the 
name area of a picture to view a full screen image.
4.
Touch one of the following options:Set: assigns the current image as the new wallpaper image that 
appears for the Main screen selected.

: allows you to rotate the image clockwise 90 degrees for 
each touch.
5.
Touch 
 to the right of a picture name to 
immediately apply it as wallpaper. 
						

							Changing Your Settings       59
WidgetAllows you to select which widget applications will appear 
docked within the Widget Bar on the Idle screen.
For more informat ion, refer to “Widgets”  on page 24.Font TypeYou can select the text style for the informational text displayed 
on your phone.1.
From Idle mode, touch   
➔ Settings
 ➔ Display and 
Light
 ➔ Font type
.
2.
Select 
Ty p e 1
, Ty pe 2
, or 
Ty p e 3
 and touch 
Save
.
Greeting MessageIn this menu you enter the text which displays on the main 
screen when the phone powers on.1.
From Idle mode, touch   
➔ Settings
 ➔ Display and 
Light
 ➔ Greeting message.
2.
Touch the screen to disp lay the virtual keyboard.
3.
Touch and hold   to erase the current greeting 
message.
4.
Use the on-screen keypad to enter a new greeting.
5.
Touch 
OK.
6.
Touch 
Save
 to save the new greeting.
BrightnessAllows you to adjust the displa y brightness for the LCD to see 
better within different lighting conditions.1.
From Idle mode, touch   
➔ Settings
 ➔ Display and 
Light
 ➔ Brightness.
2.
Drag the 
Level
 slider to the bright ness level you desire 
(range is 1 through 5).
3.
Touch 
Save
.
Note: 
Modifying this setting will impact your battery life.
Backlight TimeThe backlight turns the screen on  using a preset brightness level. 
When the time (set in this feat ure) runs out, the touch screen 
turns off. The phone can also be  set to lock when the Backlight 
time runs out. For more  information, refer to “Locking and 
Unlocking the Phone”   on page 18.1.
From Idle mode, touch   
➔ Settings
 ➔ Display and 
Light
 ➔ Backlight time. 
						

							602.
Touch one of the backlight time
s to set the amount of time 
the phone’s touchscreen remains lit without activity. 
Options include: 
8 Seconds
, 15 Seconds
, 30 Seconds
, 
1 Minute
, 3 Minutes
, or 
10 Minutes
).
3.
Touch 
Save
.
Note: 
Modifying this setting will impact your battery life.
Time and DateThis menu allows you to change  the current time and date 
displayed.1.
From Idle mode, touch   
➔ Settings
 ➔ Time and date
.
2.
Touch the 
Automatic time update
 drop-down list and select 
one of the following:
Automatic
: the phone automatically updates the time and date 
according to the current time zone using the network service.
Prompt first
: you are prompted before a time change is applied.
Manual only
: you need to manually set the time and date 
according to the current time zone using the Set time menu.
3.
Touch the 
Time zone 
field to assign a  new time zone:
Touch a corresponding area of the world map.–Major cities in each zone are displayed upon selection.
–Current time zones are based upon Greenwich Mean Time.
To u c h  
 to set daylight savings time.
To u c h  
OK to save the new setting.
4.
Touch 
12H
 (12 hour) or 
24H
 (24 hour) from the 
Time format
 
field.
5.
Touch the 
Time
 field then adjust the 
Hour
 and 
Minute
 
values:
To u c h  
Hour
 or Minute
 and touch numbers (Keypad mode).
– or –Use the 
+ and 
- buttons or quickly slide your fingertip over the 
numbers to scroll through their available values (Jog mode).
Touch either 
AM or PM.
To u c h  
Set to complete the assignment.
6.
Touch the 
Date format
 pull-down list and  select the format 
in which you want th e date to display.
7.
Touch the 
Date
 field then adjust the 
Month
, Day, and 
Ye a r
 
values:
To u c h  
Month
, Day, or 
Ye a r
 and touch numbers (Keypad mode).
– or –Use either the 
+ and 
- buttons or quickly slide your fingertip over the 
numbers to scroll through their available values (Jog mode).
Off 
						

							Changing Your Settings       61
To u c h  
Set to complete the assignment.
8.
Touch 
Save
 to store all the new time and date settings.
Phone SettingsTo customize various phone settings:
From Idle mode, touch   
➔ Settings
 ➔ Phone
.
LanguageThis menu allows you to select a display language for Text 
language and Text Input mode. Ch oose from Automatic, English, 
Français, and Español.1.
From Idle mode, touch   
➔ Settings
 ➔ Phone
 ➔ 
Language
.
2.
Touch the 
Screen text
 drop-down list, touch one of the 
following select ions and touch 
Save
:

(uses the language set on your SIM card).
 English


3.
Touch the
 Input language
 drop-down list, touch one of the 
following select ions and touch 
Save
:
 English 

4.
Touch   to return to the Phone settings page.
Vibration FeedbackYou can set the level of vibration 
intensity that occurs when you 
touch the screen.1.
From Idle mode, touch   
➔ Settings
 ➔ Phone
 ➔ 
Vibration feedback
.
2.
Drag the 
Vibration intensity 
slider to the intensity level you 
desire (range is 0 through 4).
3.
Touch 
Save
.
Quick AccessUse the Quick Access feature to select an application to launch 
when you open the slide  while in the Idle mode.1.
From Idle mode, touch   
➔ Settings
 ➔ Phone
 ➔ 
Quick access
.
2.
Touch the radio button next to 
Off or an application name. 
Application choices are:
 Messaging
 Create new message 
						

							62


3.
Touch 
Save
.
Motion DetectionThe Motion Detection feature can be used to temporarily mute 
the current sound, and the sound pr ofile is not changed, if you 
turn over the phone.1.
From Idle mode, touch   
➔ Settings
 ➔ Phone
 ➔ Motion 
Detection
.
2.
Touch 
On to activate the Motion Detection feature or touch 
Off to deactivate it.
3.
Touch 
Save
.
For more information on using Motion Detection on your phone, 
see the following:
To mute the ringer - 
see 
“Other Answering Options”
 on page 35.
To mute an alarm - see 
“Turning Off an Alarm”
 on page 147.
To start or restart a timer - see 
“Timer”
 on page 152.
Touch Panel Auto-LockThe Touch Panel Auto-Lock featur e locks your phone when the 
Backlight turns off. To modify this feature, follow these steps:1.
From Idle mode, touch   
➔ Settings
 ➔ Phone
.
2.
Touch 
On or Off from the 
Touch panel auto-lock 
field.
For more information, refer to  “Locking and Unlocking the 
Phone”   on page 18.
SecurityThe Security feature enables you to restrict the use of your phone 
by others and to restri ct the types of calls.
Various codes and passwords are used to protect the features of 
your phone.
From Idle mode, touch   
➔ Settings
 ➔ Phone
 ➔ 
Security
.
Lock PhoneWhen the Lock Phone feature is en abled, the phone is locked and 
you must enter the 4 to 8 digit phone password each time the 
phone is switched on.Note: 
You will be prompted to create a password the first time this feature is enabled.
To change the phone password, see  “Change Phone Password” 
on page 64. Once you enter the correct password, you can use 
the phone until you switch it off.
Touch 
On or Off from the 
Lock Phone
 field. 
						

							Changing Your Settings       63
Lock SIM CardWhen the Lock SIM Card feature is enabled, your phone only 
works with the current SIM. You must enter the lock code to 
unlock the SIM so you can use a different SIM card. Once you 
have entered the lock code, yo u are asked to confirm your 
password.
Touch 
On or Off from the 
Lock SIM Card
 field.
Note: 
This lock code is typically the last four digits of the current phone  number or can be obtained from an AT&T customer service representative.
Check PIN CodeWhen the Check PIN Code feature is enabled, you must enter 
your PIN each time you switch  on the phone. Consequently, any 
person who does not have your PIN cannot use your phone 
without your approval.
Touch 
On or Off from the 
Check PIN Code
 field.
Note: 
You can obtain your PIN from an AT&T customer service representative.
Lock ApplicationsUsing this menu, you can lock  your applications and media 
content (apps, messages, images, and sounds) from being 
accidentally accessed, altered or deleted. Once you lock the  content, you must enter the phone’s password to access the 
associated menus.
Note: 
The first time you access the password screen, you will be prompted to create a password.1.
Touch the 
Lock applications
 field.
2.
Touch the box next to each appl
ication you want to lock or 
touch 
Select All
 to select all applications.
Applications include: Messaging, My stuff, Recent calls, Address 
Book, Calendar, Memo, IM, and Tasks.To u c h  
Save
 to store your new selections.
3.
Enter a new password (during the first use) using the 
on-screen keypad into the 
New Password
 field and touch 
Confirm
.
4.
Enter the new password again and touch 
Confirm
.
Note: 
To change this password, see  “Change Phone Password” on page 64.
Fixed Dialing ModeFDN (Fixed Dial Number) mode, if  supported by your SIM card, 
restricts your outgoi ng calls to a limited set of phone numbers. 
When this feature is enabled, you can make calls only to phone  
						

							64numbers stored in the FDN list on the SIM card. For more 
information, refer to “FDN Mode”  on page 86.1.
Touch 
On or Off from the 
Fixed dialing mode
 field.

: you can only call phone numbers stored in the Fixed Dial 
Contacts. You must enter your PIN2 to continue this configuration. 
You can obtain your PIN2 from AT&T’s customer service 
department.

: you can call any number.
2.
Use the on-screen keypad to enter your PIN2 Code and 
touch 
Confirm
.
Note: 
The PIN2 code is provided by AT&T. Entering an incorrect PIN2 code  can cause the phone to lock, at which point, you will have to call AT&T customer service for assistance.
Change Phone PasswordThe Change Password feature allo ws you to change your current 
phone password to a new one.  You must enter the current 
password before you can specify a new one.1.
Touch the 
Change phone password
 field.
2.
Enter the current phone  password and touch 
Confirm
.
Note: 
Initially, the phone will not have a password assigned, and step 2 will 
not be necessary. Once a password is assigned, all steps are necessary.3.
Enter the new password and touch 
Confirm
.
4.
Re-enter the same  password and touch 
Confirm
.
Note: 
If you change your password, be sure to write it down and keep it in a 
safe place. If you forget your password, your phone will require AT&T customer service to have it unlocked.
Change PIN CodeThis feature allows you to change  your current PIN, provided that 
the Check PIN Code feature is en abled. The Check Pin Code field 
must be active befo re you can access this function (page 63). 
						

							Changing Your Settings       65
Note: 
This code is provided by AT&T. Entering an incorrect code can cause the phone to lock, at which point, you will have to call AT&T customer service for assistance.1.
If the Check PIN Code feature  has not been enabled, touch On from the 
Check PIN code
 field.
2.
Touch the
 Change PIN code
 field.
3.
Enter your current PIN code and touch 
Confirm
.
4.
Enter the new PIN code and touch 
Confirm
.
5.
Re-enter (reconfirm) the same code and touch 
Confirm
.
Change PIN2 codeThe Change PIN2 code feature allo ws you to change your current 
PIN2 to a new one. You must first enter the current PIN2 
(obtained from AT&T)  before you can specify a new one. Once 
you have entered a new PIN2, yo u are asked to confirm it by 
entering it again.Note: 
Not all SIM cards have a PIN2. If your SIM card does not have a PIN2, this menu does not display.1.
Touch the 
Change PIN2 code
 field.
2.
Use the on-screen keypad to enter your PIN2 code and 
touch 
Confirm
.
3.
Enter the new PIN2 code and touch 
Confirm
.
4.
Re-enter (reconfirm) th e same code and touch 
Confirm
.
APN ControlThis feature allows you to turn  control of Access Point Names 
(APN) On or Off. APNs are a method by which you can access 
advanced communication using  your handset. This advanced 
communication can include in stant messaging, multimedia 
messaging, email, and Internet  access. Turning On APN Control 
requires the PIN2 code.1.
Touch 
On or Off from the 
APN Control
 field.
2.
Use the on-screen keypad to enter your PIN2 code and 
touch 
Confirm
.
Press   to return to the pr evious Phone settings page.
Reset PhoneYou can easily reset your phone to  its default settings. To reset 
your phone:1.
From Idle mode, touch   
➔ Settings
 ➔ Phone 
➔ Reset 
Phone
.
2.
At the 
All settings reset to factory defaults. Continue?
 
prompt, touch 
Ye s to reset or 
No to cancel. 
						

							663.
Enter your phone password
, if prompted, and touch Confirm
.
4.
After the phone settings have been reset, the 
Reset done
 
confirmation displays.
Once your phone resets to it s default settings for those 
selected options, it automatically restarts in order to 
incorporate the new settings.
Note: 
User Data, such as contacts, messages, pictures, videos, and music, is not deleted.
Restore PhoneThe Restore Phone option is the  same as the Reset Phone option 
described above in that all settings are reset to factory defaults. 
However, with the Restore Phone option, all user data is deleted.Warning!: 
All User Data such as contacts, messages, pictures, videos, and  music will be deleted. Ensure that you remove your MicroSD card 
if applicable because it will be erased with the Restore Phone option.
Airplane ModeAirplane Mode allows you to use  many of your phone’s features, 
such as Games, Voice note, and so on, when you are in an 
airplane or any other area where making calls or receiving calls 
or data is prohibited. When your  phone is in Airplane Mode, it 
cannot send or receive any calls or access online information. 
The Airplane Mode icon ( ) ap pears in place of the signal 
strength indicator when active.1.
From Idle mode, touch   
➔ Settings
 ➔ Phone
.
2.
Touch  On or  Off from the 
Airplane Mode
 field.
Call Settings
From Idle mode, touch   
➔ Settings
 ➔ Calls
.
Adjusting the General Call Settings1.
Touch 
General
 and select from the following options:
 Show my number
: allows you to select how your caller ID is 
handled when an outgoing call is initiated. This is what others see 
on their Caller ID screen. This value can be made blank if you do not 
want your number displayed to other users.
 Auto reject
: allows you to set up and add numbers to a Reject List, 
which causes those numbers to be automatically sent to voice mail.
–Touch either 
On or Off to activate or deactivate the function.
–If active (On), touch the 
Reject list Add Number 
field to enter or 
search for numbers.