Samsung E105 User Manual

							Display                                                                                       
 18
To activate or deactivate use of the service light, set the 
Service Light menu option (Menu 5.2.6). 
						

							Getting Started 
19
Getting Started
Installing the SIM Card
When you subscribe to your service provider’s network, you are 
provided with a plug-in SIM card loaded with your subscription 
details, such as your PIN, any optional services available and so 
on.
Note: The plug-in SIM card and its contacts can be easily damaged 
by scratches or bending, so be careful when handling, inserting or 
removing the card. Keep all SIM cards out of the reach of small 
children.
1. If necessary, switch off the phone by holding down the   key 
until the power-off image is displayed.
2. Remove the battery. To do so:
 ●Pull the catch above the battery toward the top of the phone 
and hold it in that position.
 ●Lift the battery away, as shown.
3. Slide the SIM card into the SIM card socket so that it locks the 
card into position.  Make sure that the notched corner is top left 
and the gold contacts of the card face into the phone. 
						

							Getting Started                                                                                       
 20
Note: When you need to remove the SIM card, slide it, as shown, 
and take it out of the socket. 
						

							Getting Started 
21
4. Place the battery back, taking care to match the tabs on the 
battery with the grooves on the phone.
5. Press the battery down until it clicks into place.  Make sure that 
the battery is properly installed before switiching on the power.
Charging the Battery
Your phone is powered by a rechargeable Li-ion battery.  A 
travel charger comes with your phone for charging the battery.   
						

							Getting Started                                                                                       
 22
Use only approved batteries and chargers.  Ask your local 
Samsung dealer for further details.
The travel charger allows you to use the phone while the 
battery is charging, but this causes the phone to charge more 
slowly.
Note: You must fully charge the battery before using your phone for 
the first time.  A discharged battery is fully recharged in 
approximately 200 minutes.
1. With the battery in position on the phone, plug the connector of 
the travel charger into the jack at the bottom of the phone.
2. Plug the charger into a standard AC wall outlet.
3. When charging is finished, unplug the charger from the power 
outlet and from the phone by pressing the gray tabs on both 
sides of the connector and pulling the connector out. 
						

							Getting Started 
23
Note: You must unplug the charger before removing the battery from 
the phone during charging; otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time 
remain, you will hear a warning tone and a message repeats at 
regular intervals on the display.  When the battery level gets 
too low, the phone turns off automatically.
Switching the Phone On or Off
1. Open the phone.
2. Hold down the 
 key until the phone turns on.
3. If the phone asks you to enter the phone password, enter the 
password and press the OK soft key.  The phone password is 
preset to “00000000” at the factory.  For further details, 
“Access Codes” on page 115.
4. If the phone asks for a PIN, enter the PIN and press the OK soft 
key.  For further details, “Access Codes” on page 115.
The phone searches for your network and, after finding it, the 
idle screen, illustrated below, appears on both displays.  Now, 
you can make or receive a call. 
						

							Getting Started                                                                                       
 24
Note: The display language is preset to English at the factory.  To 
change the language, use the Language menu option.  For further 
details, see page 87.
5. When you wish to switch the phone off, hold down the 
 key 
until the power-off image displays. 
						

							Call Functions 
25
Call Functions
Making a Call
When the idle screen is displayed, key in the area code and 
phone number, and press the  key.
Note: If you have checked the Auto Redial option in the Extra 
Settings menu (Menu 5.7.1), the number is redialed automatically 
up to ten times when the person does not answer the call or is 
already on the phone.
Making a International Call
1. Press and hold down the 0 key.  
The + character appears.
2. Key in the country code, area code and phone number and press 
the  key.
Correcting the Number
Ending a Call
When you have finished your call, briefly press the  key.
To clear... Then...
The last digit 
displayedPress the   key. 
Any other digit in 
the numberPress the 
Left or Right key until the cursor 
is immediately to the right of the digit to be 
cleared. Press the   key. You can also 
insert a missing digit simply by pressing the 
appropriate key.
The whole display Hold down the   key for more than one 
second. 
						

							Call Functions                                                                                       
 26
Redialing the Last Number
The phone stores the numbers you dialed, received or 
missed.To recall any of these numbers, proceed as follows.
1. If you have typed any characters on the display, clear the display 
by holding down the   key for more than one second.
2. Press the   key to display a list of the last numbers in the 
order in which the calls were made.
3. Use the Up and Down keys to scroll through the numbers until 
the required number is highlighted. 
Making a Call from the Phonebook
You can store frequently-dialed phone numbers with a name in 
the SIM card or the phone memory, using the phonebook. You 
then simply select the required name to recall the associated 
number. For further details on the Phonebook features, refer to 
page 35.
Adjusting the Volume
During a call, if you want to adjust the earpiece volume, use the 
 keys on the left side of the phone. Press the  key to 
increase and the  key to decrease the volume.
In idle mode, you can adjust the key volume using the Up and 
Down keys.
4.To... Then...
Dial the number 
highlightedPress the   key.
Edit the number 
highlightedPress the 
Options soft key select Edit option and change the number 
as required. 
						

							Call Functions 
27
Answering a Call
When somebody calls you, the phone rings and shows the 
incoming call animation. 
If the caller can be identified, the caller’s phone number or 
name, if stored in your phonebook, is displayed.
1. If necessary, open the phone and press the   key or the 
Accept soft key to answer the incoming call.
2. If the 
Anykey Answer option in the Extra Settings menu  is 
checked, you can press any key to answer a call except for the 
 key and the Reject soft key.
If the Active Folder option in the Extra Settings is checked, 
yuo can answer the call simply by opening the phone.
Note: You can answer a call while using the phonebook or menu 
features.
Viewing Missed Calls
If you are unable to answer a call for any reason, you can find 
out who was calling you, provided that this service is available. 
This option provides the ability to call the person back, if 
necessary. The number of missed calls is displayed on the idle 
screen immediately after a call was missed.
To view the missed call immediately
1. Press the View soft key.
2. The number corresponding to the most recent missed call is 
displayed, if available.
To.... Then press the...
Scroll through the missed 
callsUp or Down key.
Call the number displayed  key.