Samsung DLPTV HLN467w User Manual

							81
PC Display
80
Display ModesNOTEBoth screen position and size will vary, depending on the type of PC monitor and its resolution.
The table above shows all of the display modes that are supported:
*  The interlace mode is not supported.
*  The TV will operate abnormally if a non-standard video format is selected.NOTES •When this TV is used as a PC display, 32-bit color is supported (over 16 million colors).
•Your PC display screen might appear different, depending on the manufacturer (and depending
on your particular version of Windows). Check your PC instruction book for information about
connecting your PC to a TV display-monitor.
•Same modes as PC are supported for the signal input to the DVI jack. Only a separate sync 
signal is supported. 
How to Set up Your TV as a PC display“Auto Adjust” allows the TV to self-adjust to the incoming video signal. The values of fine,
coarse and position are adjusted automatically.
1
Press TV/VIDEO on the remote con-
trol. 
Move the joystick up or down to
select PC, then press the joystick to
enter. 
2
Press the Menu button. 
Move the joystick down to 
select “PC”, then press the
joystick to enter.
2
Move the joystick down to
select “Auto Adjust”.   
3
Press the joystick to enter.
Resolution
640x350
720x400
720x400
640x480
640x480
640x480
640x480
640x480
800x600
800x600
800x600
800x600
800x600
832x624
1024x768
1024x768
1024x768
1920x1080i
1280x720p
720x483pTo t a l
800x449
900x449
936x446
800x525
864x525
832x520
840x500
832x509
1024x625
1056x628
1040x666
1056x625
1048x6321
1152x667
1344x806
1328x806
1312x800
2200x1125
1650x750
858x525Hor. Freq
31.47 kHz
31.47 kHz
37.93 kHz
31.47 kHz
35.00 kHz
37.86 kHz
37.50 kHz
43.27 kHz
35.16 kHz
37.88 kHz
48.08 kHz
46.87 kHz
53.67 kHz
49.73 kHz
48.36 kHz
56.40 kHz
60.02 kHz
33.75 kHz
45.00 kHz
31.47 kHzPolarity
P
N
N
N
N
N
N
N
N/P
P
P
P
P
N
N
N
P
X
X
XVer. Freq
70.00 Hz
70.00 Hz
85.00 Hz
60.00 Hz
66.70 Hz
72.80 Hz
75.00 Hz
85.00 Hz
56.30 Hz
60.30 Hz
72.20 Hz
75.00 Hz
85.10 Hz
74.60 Hz
60.00 Hz
70.10 Hz
75.00 Hz
60.00 Hz
60.00 Hz
60.00 HzPixel Clock
25.175 MHz
28.322 MHz
35.5 MHz
25.175 MHz
30.24 MHz
31.5 MHz
31.5 MHz
36 MHz
36 MHz
40 MHz
50 MHz
49.5 MHz
56.25 MHz
57.284 MHz
65 MHz
75 MHz
78.75 MHz
74.25 MHz
74.25 MHz
27 MHzSep
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0Com
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
x
x
xSOG
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x Polarity
N
P
P
N
N
N
N
N
N/P
P
P
P
P
N
N
N
P
X
X Mode
VGA
SVGA
XGA
DTV 
						

							Changing the Position of the Image (Moving left, right, up and down)After connecting the TV to your PC, adjust the position of screen if it is not well-aligned.
1
Press TV/VIDEO on the remote con-
trol. 
Move the joystick up or down to
select PC, then press the joystick to
enter. 
2
Press the Menu button. 
Move the joystick down to 
select “PC”, then press the
joystick to enter.
3
Move the joystick down to
select “Position”, then press
the joystick to enter.
Adjust the position of screen
by using the joystick button.
Press the Menu to exit. 
NOTE•If a PC signal is input to DVI, you can’t adjust the quality and
position of picture. 
To Initialize the Screen Position and Picture Quality AdjustmentAfter steps 1~2 above are completed, move the joystick down to
select Recall. Press the joystick to initialize the screen position and
picture quality. NOTE•When ‘Recall’ is active, the TV screen will become black and return to
the original view about five seconds later. (This is a normal opera-
tion.)
83
Picture Quality AdjustmentThe purpose of picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost
and fine tune again.  After the noise has been reduced, re-adjust the picture so that it is aligned
on the center of screen.
Frequency Adjustment1
Press TV/VIDEO on the remote
control. 
Move the joystick up or down to
select PC, then press the joystick to
enter. 
2
Press the Menu button. 
Move the joystick down to 
select “PC”, then press the
joystick to enter.
3
Move the joystick down to
select “Coarse”.   
Remove picture noise (vertical
stripes) on the screen by mov-
ing the joystick right or left. 
(If frequency is not set proper-
ly, then vertical stripes will
appear on the screen). 
Fine tuning4
Move the joystick down to
select “Fine”.   
Remove picture noise (vertical
stripes) on the screen by mov-
ing the joystick right or left. 
(If phase is not set properly,
the picture may be blurry.) 
Press the Menu to exit. 
PC Display
82 
						

							85
PC Display
84
Changing the Screen Size (PC mode)When you press the ASPECT button on the remote control, the TV’s screen mode choices appear
in sequence.  The screen displays in this order: Wide(TV), Wide(PC),Expand, Normal.     
The name of the screen mode will be displayed at the bottom of the TV screen.
Wide (TV)Scales the picture to the size of the TV
screen regardless of the aspect ratio of the
input source.Wide (PC)Scales the picture to 92% of the screen
regardless of the aspect ratio of the input
source.ExpandScales the picture to the aspect ratio
of the input source.NormalDisplays the picture as it is without chang-
ing the aspect ratio of input source.
Aspect Supported settingsNOTES • In VGA (640x480) and SVGA (800x600) modes, the Wide(TV), Wide (PC), Expand and
Normal screen modes are available.
• In XGA (1024x768) mode, the Wide (TV), Wide (PC) and Expand screen modes are available.
Aspect
Wide(TV)
Wide(TV) 
➝Wide(PC)
Wide(TV) ➝Wide(PC) 
➝Expand
Wide(TV) 
➝Wide(PC) 
➝Normal
Wide(TV) 
➝Wide(PC) 
➝Expand 
➝Normal Source (PC/DVI)
1920 x 1080i
1280 x 720
1024 x 768
720 x 483 (480p)
Others 
						

							Appendix
SAMSUNG 
						

							Appendix
8889
Troubleshooting Before you call a service technician, please scan this list of problems and possible solutions. 
It may save you time and money.  
• The display panel used for the DLP Projection TV is composed of many tiny pixels. These, pixels
may occasionally appear on the screen.
Care and MaintenanceWith proper care, your TV will give you many years of service. Please follow these guidelines to
get the maximum performance from your TV.Placement•Do not put the TV near extremely hot, cold, humid or dusty places.
•Do not put the TV near appliances that create magnetic fields.
•Keep the ventilation openings clear.•Place the TV on a flat and level surface.
(Raising one of it’s corners may cause the picture to tilt.)Liquids•Do not handle liquids near or on the TV. Cabinet•Never open the cabinet or touch the parts inside.
•Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals.
•Do not put heavy objects on top of the cabinet.
•This DLP Projection TV projects the image onto a large screen by applying an optical 
system. If you place the TV set face down, it might cause a problem because dirt, 
or some other contaminant may become attached to the inside of the TV set. Temperature•If your TV is suddenly moved from a cold to a warm place, unplug the power cord for at least
two hours so that moisture that may have formed inside the unit can dry completely.Using the TV in Another CountryIf you plan to take your TV to a foreign country, please be aware of the different television systems
that are in use around the world. A TV designed for one system may not work properly with anoth-
er system due to differences in the TV channel frequencies.Specifications
Problem   Possible SolutionPoor picture quality. Try another channel.
Adjust the antenna.
Check all wire connections.Poor sound quality or no sound. Try another channel.
Adjust the antenna.
Make sure the “Mute” button is off.No picture or sound. Try another channel.
Press the TV/Video button.
Make sure the TV is plugged in.
Check the antenna connections.No color or wrong colors. Make sure the program is broadcasted in color.
Adjust the picture settings.Picture rolls vertically. Adjust the antenna.
Check all wire connections.
If you are using a VCR, check the tracking.Erratic operation, or  Unplug the TV for 30 seconds, then try again.
intermittent failure.Remote control failure. Press the “Mode”button to put your remote control
into “TV” mode. 
Make sure the remote has batteries.TV won’t switch on. Make sure the wall outlet is working.
Make sure the remote has batteries.
Model
Voltage
Frequency of Operation
Power Consumption
Dimension
(W x D x H)
Weight
HLN4365W/HLN437W
AC 120V 
60Hz
200 watts1029 x 399 x 755 mm
40.5 x 15.7 x 29.7 inches30.5 Kg / 67.2 lbsHLN5065W/HLN507W
AC 120V 
60Hz
200 watts
1184 x 444 x 859 mm
46.6 x 17.5 x 33.8 inches35.2 Kg / 77.6 lbsHLN617W
AC 120V 
60Hz
200 watts
1436 x 489 x 1021mm
56.5 x 19.3 x 40.2 inches46.2 Kg / 101.9 lbsHLN467W
AC 120V 
60Hz
200 watts
1047 x 399 x 779 mm
40.6 x 15.7 x 30.6inches33.5 Kg / 73.8 lbsHLN567W
AC 120V 
60Hz
200 watts
1268 x 461 x 924mm
49.9 x 18.1 x 36.4 inches41.5 Kg / 91.5lbs 
						

							91
Memo
90