Samsung DLP TV HL-R5668W User Manual

English - 41
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes).
1
Press the MENU button. 
Press the …or †button to
select “Setup”, then press 
the ENTER button.
2
Press the …or †button to
select “Time”, then press the
ENTER button.
Press the …or †button to
select “Sleep Timer”, then
press the ENTER button.
3
Press the …or †button to
adjust “Minute”.
4
Setting the Timer sets the
Activation to “Yes” 
automatically.
Press the EXIT button to...

English - 42
Operation
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment,
such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable).
Setting the Signal Source
1
Press the MENU button. 
Press the ENTER button to
select “Input”.
2
Press the ENTER button to
select “Source List”.
Press the …or †button to
select a signal source, then
press the ENTER button.
Alternate method
Press the SOURCE button on the
remote control repeatedly to...

English - 43
Assigning Names to External Input Mode
This feature enables you to name the input source you have connected.
1
Press the MENU button. 
Press the ENTER button to
select “Input”.
2
Press the …or †button to
select “Edit Name”, then
press the ENTER button.
3
Press the …or †button to
select a signal source to
edit, then press the ENTER
button.
4
Press the …or †button to
select the external device :
VCR, DVD, D-VHS, Cable
STB, HD STB, Satellite STB,
PVR STB, AV Receiver, DVD
Receiver, GAME,...

SAMSUNG
BP68-00520A-00Eng(030~053)  6/3/05  3:52 PM  Page 44 

Channel Control
BP68-00520A-00Eng(030~053)  6/3/05  3:52 PM  Page 45 

Channel Control
English - 46
Selecting Your Favorite Channels
You can store your favorite channels for each available input source (such as TV and CATV). 
This allows you to quickly and easily find frequently watched channels by pressing the FAV.CH button on
the remote control.
To Store Your Favorite Channels:
1
Press the MENU button. 
Press the …or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or †button to
select “Favorite Channels”,
then press the ENTER button.
Press the …or †...

English - 47
Viewing the Channel Lists
You can display a list of all channels or your favorite channels.
1
Press the MENU button.
Press the …or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or †button to
select “Channel List”, then
press the ENTER button.
3
Press the …or †button to
select “All” or “Favorite”,
then press the ENTER button.
Press the CH/PAGE  or
CH/PAGE button to 
display the previous or 
next channel list page.
Alternate method
Press the CH.LIST button
on the...

Channel Control
English - 48
Adding and Erasing Channels
1
Press the MENU button.
Press the …or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or †button to
select “Channel List”, then
press the ENTER button.
3
Press the …or †button to
select “Edit”, then press the
ENTER button. 
4
Press the …or †button to
change channels you want 
to add or delete.
Repeatedly pressing ENTER
button will alternate between
“Add” and “Delete”.
Press the …or †button to select the favorite channel you...

English - 49
Labeling the Channels
Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”,
“PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear below the channel number.
1
Press the CH/PAGE  or CH/PAGE  button to tune to the
channel that will be labeled. 
2
Press the MENU button. 
Press the …or †button to
select “Channel”, then press
the ENTER button....

English - 50
Channel Control
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve
the reception (a low-noise preamplifier boosts the incoming signal).
1
Press the MENU button.
Press the …or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or †button to
select “LNA”, then press the
ENTER button.
3
Press the …or †button to
select “On” or “Off”, then
press the ENTER button.
4
Press the EXIT button to exit.
NOTES
•LNA functions...