Samsung Digimax V5 User Manual

							101
Setting up the application software
7. A window will open, asking you to choose
a folder to which program icons will be
added. Click [Next >] button. 
If you want to add the program icons to a
different folder, choose another folder, and
then click [Next >] button.
If you click [Cancel] in Step 9, the PhotoImpression installation will be canceled and the
Restart Computer window will appear.
INFORMATION
[Click!]
8. Digimax Viewer installation is successfully
completed. Click the [Finish] button to
install PhotoImpression.The system will
not reboot even the [Yes, I want to restart
the computer now] option is selected.
*The frame 8 may not appear according to
the system requirements.
[Click!]
9. Digimax Viewer Installation is completed. 
The PhotoImpression installation window
will be displayed as shown alongside. 
Click the [OK] button.
[Click!]
10. A Welcome window will be displayed.
Click the [Next >] button.
[Click!]
11. The Software License Agreement
window will be displayed. If you agree to
this, click [Yes], the window will then
move to the next step. If you disagree,
click [No] and the installation program will
be canceled.
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							102
Setting up the application software
12. A destination selection window will open.
Click [Next >]. To copy to the files to
another folder, click [Browse...] and
choose a folder you want.
[Click!]
13. The [Select Components] window will
appear. Click [Next >] button.
[Click!]
14. A window will open, asking you to choose
a folder to which program icons will be
added. Click [Next >] button. 
If you want to add the program icons to a
different folder, choose another folder,
and then click [Next >] button.
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							103
Setting up the application software
15. Installation is complete. To apply
changes, you must restart the computer.
Select [Yes, I want to restart my
computer now], and then click [Finish].
16. After restarting the computer, connect the PC to the camera with the USB cable.
18. If you can see [Removable Disk] under
[My computer], the camera driver
installation was successful. 
Now you can transfer image files from the
camera to PC via the USB cable.
[Click!]
17. Turn the camera power on. [Found New
Hardware Wizard] will open and the
computer will recognize the camera.
If you have ever installed an image viewer
program or your OS is Windows XP, an
image viewer program will open. 
If the image viewer program opens, the
camera driver was setup successfully.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							104
Setting up the application software
If you have installed the camera driver, [Found New Hardware Wizard] may not open.
On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens
and a window asking you to select a driver file may appear. In this case, specify Digimax
V5 V5000 Driver in the CD supplied. (for Windows 98 and 98 SE).
When connecting the camera to your PC, it is recommended that you use an AC power
adapter.
Before connecting the camera to the PC, You should first install the camera driver.
After installing the camera driver, you have to restart your PC.
If you connect the camera to the PC before installing the camera driver, the [Found New
Hardware Wizard] will open.
In this case, cancel the [Found New Hardware Wizard] and disconnect the camera. Install
the camera driver and connect the camera to the PC again.
Should the computer not find the camera driver after installation, please try one or more of
the following measures.
1. Delete the camera driver (p.108), and re-install the driver.
2. Refer to FAQ (p.114) to check for a possible solution to the problem.
3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host
Controller), download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com)
INFORMATION
Downloaded From camera-usermanual.com Samsung Manuals 
						

							105
Starting PC Mode
The camera driver must be installed before using PC mode.
To save battery power, it is recommended that you use an AC adapter (Optional) when
connecting the camera to a computer.
INFORMATION
If you connect the USB cable to a USB port on your PC and then turn on the power, the
camera will automatically switch to computer connection mode.
In this mode, you can download stored images to your PC through the USB cable.
The LCD monitor is always turned off in PC mode.
The auto focus lamp will illuminate when the files are transferring via the USB connection.
Connecting the camera to a PC
1. Turn the PC power on.
2. Turn the camera power on.
3. In any mode other than Voice Recording mode, press
the MENU button.
4. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
5. Select the [USB] menu by pressing the UP/ DOWN
button and press the RIGHT button.
6. Use the UP and DOWN buttons to select
[COMPUTER], and then press the OK button.
7. Press the menu button twice and the menu will disappear.
8. Connect the PC and the camera via the USB cable.
- Insert the small plug of the USB cable into the camera USB connection terminal.
- Insert the large connector of the USB cable into the USB port of the PC.
- The plugs must be firmly inserted.
Disconnecting the camera and PC : Refer to page 110 (Removing the removable disk).
If you selected [PRINTER] in Step 6,
when you connect the camera to your
computer, the [CONNECTING...]
message will be displayed on the LCD
monitor and the connection will not be
established. In this case, disconnect the
USB cable, and then follow the procedure
from Step 3 and onward.
SETUPQ. VIEW
RESET
USB
BACK:
SET:OK
COMPUTER
PRINTER
NOR 2560
Downloaded From camera-usermanual.com Samsung Manuals 
						

							106
Starting PC Mode
3. Select an image and press the right mouse
button.
4. A pop-up menu will open.
Click [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy] : copies files.
Downloading stored images
You can download the still images stored on the camera to your PCs hard disk and print
them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computers desktop display, select
[My computer] and double click [Removable
Disk 
DCIM 100SSCAM].
The image files will then be displayed.
5. Click a folder where you want to paste the file.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							107
Starting PC Mode
6. Press the right mouse button and a pop-up
menu will open. Click [Paste].
7. An image file is transferred from the camera to
your PC.
- By using [Digimax Viewer], you can see the stored images in the memory directly on the PC
monitor and you can copy or move the image files.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							108
Removing the USB Driver for Windows 98SE
To remove the USB driver, refer to the process shown below.
1. Trace [Start Settings] and click [Control Panel].
[Click !]
4. Uninstallation is complete. 
Click the [Finish] button and the window will
disappear.
[Click !]
2. Double-click [Add/Remove programs].
3. The [Add/Remove Programs Properties] window
will open. Click [Digimax V5 V5000] and click the
[Add/Remove] button.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							109
Removable Disk
To use this camera as a Removable Disk, install (p.99) the USB Driver.
1. Before turning the camera power on, connect the camera to the PC with the USB cable.
2. Click [Removable Disk] under [My computer] or [Windows Explorer].
3. Image files stored in the Removable Disk (DCIM 
100SSCAM) can be transferred to the
PC.
Important information whilst using the Removable Disk
The [Removable Disk] indicator will not show when the camera power is off or the USB
cable is removed.
We recommend that you should copy the images to the PC to view them. Opening
images directly from the removable disk may be subject to unexpected disconnection.
When uploading images from the PC to the camera, ensure that the uploaded file names
are not the same as those already stored on the memory. 
When you upload a file that is not taken by this camera to Removable Disk, the [FILE
ERROR!] message will be displayed on the LCD monitor in the PLAY mode, and nothing
is displayed in THUMBNAIL mode.
The auto focus lamp will blink, when a file is
transferred (copy or deletion) between the PC and
the camera. Do not remove the USB cable until
the lamp stops blinking. To remove the USB cable
in Windows 2000/ME/XP, use the [Unplug or Eject
Hardware] icon on the task bar.
INFORMATION
Downloaded From camera-usermanual.com Samsung Manuals 
						

							110
Removing the removable disk
[Click!]
[Double-click!]
[Click!]
[Click!]
Windows 98SE
1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you
have to wait until the lamp illuminates.
2. Unplug the USB cable.
Windows 2000/ME/XP
(The illustrations may be different from the real display in accordance with the Windows O/S.)
1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you
have to wait until the lamp illuminates.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
3. The [Unplug or Eject Hardware] window will
open. Select the [USB Mass Storage Device]
and click the [Stop] button.
4. The [Stop a Hardware device] window will
open. Select the [SAMSUNG Digimax V5
USB Device] and click the [OK] button.
5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.
Downloaded From camera-usermanual.com Samsung Manuals