Samsung Digimax V5 User Manual

41
MF buttonIf the aperture value or shutter speed is out of the limit of
application, the value that is displayed on the LCD monitor will
show as red. However, you will still be able to take a picture.
Please adjust the shutter speed and aperture value so that
the red warning turns white (normal) before taking the picture.+/- buttonRGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to
be captured. Setting RGB Values
1. Press the +/- button, and then use the UP and...

42+/- buttonSelecting an ISO Sensitivity
1. Press the +/- button, and the use the UP and DOWN
buttons to select the ISO icon(          ). The ISO menu bar
will appear as shown.
2. Use the LEFT and RIGHT buttons to select the desired
ISO sensitivity value.
- AUTO : 
The cameras sensitivity is automatically changed by
variables such as lighting value or subject brightness.
- 50, 100, 200, 400 : 
You can increase the shutter speed while the same amount of light is present, by
increasing the ISO sensitivity....

43
+/- buttonUsing the Custom White Balance
White balance settings may vary slightly depending on the shooting environment. 
You can select the most appropriate white balance setting for a given shooting environment
by setting up the custom white balance.
1. Select the CUSTOM (          ) menu of the White
Balance.
2. Place a sheet of white paper in front of the camera so
that the LCD monitor shows only white, and then press
the SHUTTER button.
3. Your custom white balance value is stored.
- The custom...

44+/- buttonLong Time shutter : This camera automatically adjusts the shutter speed and aperture values
to the shooting environment. However, in NIGHT SCENE mode, you can
set the shutter speed and aperture values to your preference.Adjusting the shutter speed and aperture values
1. Select the NIGHT SCENE mode by rotating the mode
dial.
2. Press +/- button and Long Time shutter menu
(LT, For selecting shutter speed and aperture value) will
be displayed.
3. Configure the Long Time shutter value with the...

45
LCD button
[ Image & full information ]
[ Image & basic information ]
[ LCD off ]
You can check the recording status in the LCD monitor. 
Toggle the LCD button in shooting mode (except in voice
recording mode) to display the next LCD information
displayed.If the LCD monitor is turned off, the mode dial lamp will light up.
Pressing the
LCD buttonPressing the
LCD button
Pressing the LCD button
Downloaded From camera-usermanual.com Samsung Manuals 

46Using the LCD monitor to adjust the camera settingsYou can use the menu on the LCD monitor to set up recording functions. In any mode with the
exception of VOICE RECORDING mode, pressing the MENU button displays the menu on the
LCD monitor.The following functions are available, depending on the mode you have selected.Menu tab Main menu Sub menu Camera working mode Page 
2560X19202272X1704 2048X1536 1600X12001024X768640X480640X480320X240TIFFS. FINEFINENORMAL30FPS15FPSMULTI
SPOT
The menu will not be...

47
Using the LCD monitor to adjust the camera settings
EFFECT SHOOTING
SHARPNESS
SCENEASMp.50
p.51
p.52
p.52
p.53
* Menus are subject to change without prior notice.
Menu tab Main menu Sub menu Camera working mode Page 
SINGLE2 SHOTS4 SHOTS8 SHOTSNORMALB & WSEPIASOFTNORMALVIVIDASM
PORTRAIT CHILDREN
LANDSCAPE
CLOSE-UP
SUNSET
DAWN
BACKLIGHT FIREWORKS
BEACH&SNOW
Downloaded From camera-usermanual.com Samsung Manuals 

48How to use the menu3. Use the UP and DOWN buttons to select a sub menu.
4. Select a sub menu, and then press the OK button. 
The value you set will be saved and the menu will disappear. 1. Turn on the camera and press the MENU button. A menu for each camera mode appears.
However, there is no menu for Voice Recording mode (       ).
2. Use the LEFT and RIGHT buttons to navigate through the menus.
AUTO
Press the UP or
DOWN button.
SIZE
2560X1920 2560
2272X1704
2048X1536
1600X1200
SIZE
2560X1920
2272X1704...

49
Quality 
You can select the compression ratio appropriate for your application of the captured images.
The higher the compression ratio, the lower the picture quality.Mode  IconSub menu TIFF S.FINE FINE NORMAL 30FPS 15FPS
File Format tiff  jpeg jpeg jpeg avi avi
STILL IMAGE mode MOVIE CLIP mode
TIFF
TIFF is the highest quality and NORMAL is the lowest setting. 
Choose the setting appropriate for your needs.TIFF format is an uncompressed image file format for an expert. If you take a picture with
the...

50Metering
If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter
pictures.MULTI(          ) : 
Exposure will be calculated based on an
average of the available light in the image
area. However, the calculation will be
biased towards the centre of the image
area. This is suitable for general use.
SPOT(          ) : Only the rectangular area in the center
of the LCD monitor will be metered for
light. This is suitable when the subject
in the center is exposed...