Home > Samsung > Digital Camera > Samsung Digimax U Ca501 Users Manual

Samsung Digimax U Ca501 Users Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Samsung Digimax U Ca501 Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							31
    +/- button
    ISO: You can select the ISO sensitivity when taking pictures. 
    The speed or specific light-sensitivity of a camera is rated by ISO numbers.
    Selecting an ISO Sensitivity
    1. Press the +/- button, and then use the UP and DOWN
    buttons to select the ISO icon(         ). The ISO menu bar
    will appear as shown.
    2. Use the LEFT and RIGHT buttons to select the desired
    ISO sensitivity value.
    - AUTO : The cameras sensitivity is
    automatically changed by variables
    such as lighting value or subject brightness.
    - 100, 200, 400 : You can increase the shutter speed while the same amount of light is
    present, by increasing the ISO sensitivity. However, the image may be
    saturated in high luminance. The higher the ISO value, the higher the
    camera’s sensitivity to light is and therefore the greater its capacity to take
    pictures in dark conditions. However, the noise level in the image will
    increase as the ISO value increases, making the image appear coarse. 
    3. When you press the +/- button again, the value you set will be saved and ISO setup mode
    will end.
    Using the Custom White Balance
    White balance settings may vary slightly depending on the shooting environment. 
    You can select the most appropriate white balance setting for a given shooting environment by
    setting up the custom white balance.
    1. Select the CUSTOM (          ) menu of the White Balance
    and press the OK button. 
    2. Place a sheet of white paper in front of the camera so that
    the LCD monitor shows only white, and then press the
    SHUTTER button.
    3. Press the OK button and your custom white balance value
    is stored. 
    - The custom white balance value will be applied, starting
    with the next picture you take.
    - The user configured white balance will be remain
    effective until it is overwritten.
    [ White paper ]
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							32
    +/- button
    2) Setting up the shutter speed and aperture value
    1. In night scene mode, press the +/- button. A screen
    appears as shown to the right. 
    2. Use the LEFT and RIGHT buttons to set the shutter
    speed. Use the UP and DOWN buttons to set the aperture
    value. 
    3. Press the +/- button again. The value you set will be
    saved and the mode will switch to Night scene mode.
    Press the SHUTTER button to take the picture.
    Setting up the shutter speed and aperture value : 
    This camera automatically adjusts the shutter speed and aperture values to the shooting
    environment. However, in Night scene, you can set the shutter speed and aperture values to
    your preference. Press the +/- button after selecting the Night scene mode. 
    1) Selecting the Night scene Mode
    1. Slide the MODE switch to select Still Image mode (          ).
    2. Press the MENU button.
    3. Use the LEFT and RIGHT buttons to select the [MODE]
    menu tab. Press the UP and DOWN buttons to select the
    [SCENE] menu and press the RIGHT button. Press the
    UP and DOWN button to select the [NIGHT] menu.
    4. Press the MENU button. The menu will disappear and the
    mode will switch to Night scene mode.
    MODEAUTO
    PROGRAM
    SCENE
    BACK :
    2560
    NIGHT
    PORTRAIT
    LANDSCAPE
    SET : OK
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							33
    LCD button
    [ Image & full information ] [ Image & basic information ] [ LCD off ]
    You can check the recording status in the LCD monitor.
    Pressing the LCD button in the RECORDING (STILL
    IMAGE, MOVIE CLIP) mode will change the display as
    shown below.
    If the LCD monitor is turned off, the camera status lamp will light up.
    Pressing the
    LCD buttonPressing the
    LCD button
    Pressing the LCD button
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							34
    Using the LCD monitor to adjust the camera settings
    Menu tab Main menu Sub menu Camera working mode Page
    AUTO
    PROGRAM
    NIGHT
    PORTRAIT
    LANDSCAPE
    TEXT
    FIREWORKS
    2560X1920(P)
    1600X1200(M)
    640X480(E)
    2048X1536
    1024X768
    640X480
    320X240
    S.FINE
    FINE
    NORMAL
    15FPS
    24FPS
    MULTI
    SPOT
    You can use the menu on the LCD monitor to set up recording functions. In any mode with
    the exception of VOICE RECORDING mode, pressing the MENU button displays the menu
    on the LCD monitor.
    The menu will not be displayed on the LCD monitor in the following circumstances:
    - When another button is being operated.
    - While image data is being processed. 
    - When there is no battery capacity.
    When the menu is showing on the LCD monitor, it is not possible to operate the shutter
    button i.e. capture an image. To capture an image, simply cancel the menu display by
    pressing the MENU button.
    INFORMATION
    The following functions are available, depending on the mode you have selected.
    The items indicated by                       are default settings.
    MODE
    SIZE
    QUALITY
    METERINGS
    C
    E
    N
    Ep.36
    p.37
    p.38
    p.39
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							35
    Using the LCD monitor to adjust the camera settings
    * Menus are subject to change without prior notice.
    Menu tab Main menu Sub menu Camera working mode Page
    SINGLE
    2, 4 ,8 SHOTS
    NORMAL
    B&W
    SEPIA
    RGB
    OFF
    1 ~ 9
    SOFT
    NORMAL
    VIVID
    SHOOTING
    EFFECT
    P.FRAME
    SHARPNESS
    MYSET p.39
    p.40
    p.41
    p.42
    p.43
    CANCEL
    MYSET1,2,3LOAD
    SAVE
    MYSET1,2,3
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							36
    How to use the menu
    3. Use the UP and DOWN buttons to select a sub menu.
    4. Select a sub menu, and then the value you set will be saved. Press the MENU button and
    the menu will disappear. 1. Turn on the camera and press the MENU button. A menu for each camera mode
    appears. However, there is no menu for Voice Recording mode (          ).
    2. Use the LEFT and RIGHT buttons to navigate through the menus.
    Press the LEFT or
    RIGHT button.Press the LEFT or
    RIGHT button.
    Mode
    Press the UP or
    DOWN button.Press the UP or
    DOWN button.
    MODE
    AUTO
    PROGRAM
    SCENE
    2560
    [ STILL IMAGE mode ]
    MODEAUTO
    PROGRAM
    SCENE
    2560
    MODEAUTO
    PROGRAM
    SCENE
    2560MODEAUTO
    PROGRAM
    SCENE
    2560
    SIZE2560X1920
    2048X1536
    1600X1200
    1024X768
    PQUALITYS. FINE
    FINE
    NORMAL
    P25601
    2560
    MODEAUTO
    PROGRAM
    SCENE
    MOVE :NIGHT
    PORTRAIT
    LANDSCAPE
    CHANGE : 
    2560
    
    
    You can select the desired Still Image mode.
    AUTO : Use this for shooting basic still images.
    PROGRAM : Selecting the automatic mode will configure
    the camera with optimal settings. You can still
    manually configure all functions except the
    aperture value and shutter speed.
    SCENE : Use the menu to easily configure optimal
    settings for a variety of shooting situations.
    [NIGHT] - Use this for shooting still images at
    night or in other dark conditions.
    [PORTRAIT] - To take picture of a person.
    [LANDSCAPE] - Scenery with green woods or blue sky. 
    [TEXT] - Use this mode to shoot a document.
    [FIREWORKS] - Firework scenes.
    * When [NIGHT], [FIREWORKS] scene mode are selected, it is possible that camera shake
    will occur. If you think this will happen, use a tripod.
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							37
    Size
    You can select the image size appropriate for your application.
    The higher the resolution, the lower the number of available shots will be because high
    resolution images require more memory than lower resolution images.
    The selectable image sizes in the AUTO mode are listed below.
    - P(2560 X 1920) : For printing the image
    - M(1600X1200) : For saving the image to a PC
    - E(640X480) : For sending the image by e-mail
    INFORMATION
    SIZE
    2560X1920
    2048X1536
    1600X1200
    1024X768
    P
    [ STILL IMAGE mode ]
    SIZE
    640X480
    320X240
    [ MOVIE CLIP mode ]
    2560
    320
    FPS
    15NOR
    Mode  
    Icon2560 2048 1600 1024 640 640 320
    Size2560X1920 2048X1536 1600X1200 1024X768 640X480 640X480 320X240
    STILL IMAGE modeMOVIE CLIP mode
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							38
    Quality
    2048
    QUALITY
    S. FINE
    FINE
    NORMAL
    2048
    FRAME RATE
    15 FPS 15 F
    24 FPS
    320 NORP25601
    [ STILL IMAGE mode ] [ MOVIE CLIP mode ]
    You can select the compression ratio appropriate for your application of the captured images.
    The higher the compression ratio, the lower the picture quality.
    Mode  
    Icon 15F 24F
    Sub menu S.FINE FINE NORMAL 15FPS 24FPS
    File Format jpeg jpeg jpeg avi avi
    STILL IMAGE mode MOVIE CLIP mode
    S.FINE is the highest quality and NORMAL is the lowest setting.
    Choose the setting appropriate for your needs.
    This file format complies with the DCF(Design rule for Camera File system).
    JPEG (Joint Photographic Experts Group) : JPEG is the image compression standard
    developed by the Joint Photographic Experts Group. This type of compression is most
    commonly used for compressing photos and graphics because it can compress the files
    efficiently without damaging the data.
    INFORMATION
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							39
    Metering
    If you cannot obtain suitable exposure conditions, you can change the metering method to
    take brighter pictures.
    MULTI(            ) : Exposure will be calculated based on
    an average of the available light in the
    image area. However, the calculation
    will be biased towards the centre of the
    image area. This is suitable for general
    use.
    SPOT(            ) : Only the rectangular area in the centre
    of the LCD monitor will be metered for
    light. This is suitable when the subject in the center is exposed correctly,
    regardless of the back lighting. 
    The default metering mode is Multi pattern metering.
    If the subject is not the centre of the focus area, do not use the spot metering as this may
    result in an exposure error. In this circumstance, It is better to use exposure
    compensation.
    INFORMATION
    Continuous shot
    Select the number of pictures in continuous shooting.
    - [SINGLE] : Take one picture only 
    - [2, 4, 8 SHOTS] : Take the set number of pictures with one
    push of the shutter. Continuous shooting
    mode is cleared after one shooting.
    2048
    SHOOTING
    SINGLE
    2 SHOTS
    4 SHOTS
    8 SHOTS
    NOR
    [ PROGRAM mode ]
    2048
    METERINGMULTI
    SPOT
    2560 NOR1
    1
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							40
    Continuous shot
    By using the camera’s digital processor, it is possible to add special effects to your images.
    [ PROGRAM mode ][ MOVIE CLIP mode ]
    NORMAL : No effect is added to the image.
    B & W : Converts the image to black and white.
    SEPIA : Captured images will be stored in a sepia tone 
    (a gradient of yellowish brown colours).
    RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the
    images to be captured.
    2048
    EFFECTNORMALNORB & W
    SEPIA
    RGB
    2048
    EFFECTNORMALNORB & W
    SEPIA
    RGB
    640
    Effect
    * High resolution and picture quality increases file saving time, which increases stand-by time.
    * If the [2, 4, 8 SHOTS] sub menu is selected, the flash will be off automatically.
    * If you change the image size and quality after selecting the number of continuous shots, the
    [SHOOTING] sub menu will be changed to the [SINGLE] automatically.
    1FPS
    24
    Available maximum number of continuous shots, by image size/ quality type
    (Unit : shot)
    S.FINE FINE NORMAL
    2560x1920 2 2 2
    2048X1536 2 2 2
    1600X1200 2 2 4
    1024X768 4 8 8
    640X480 8 8 8
    quality
    size
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    All Samsung manuals Comments (0)

    Related Manuals for Samsung Digimax U Ca501 Users Manual