Samsung Digimax U Ca5 Users Manual

							111
Setting up the application software
If you select [Cancel] at step 14, a window for installing Digimax Reader will be displayed.
INFORMATION
15. The Software License Agreement window will be
displayed. 
If you agree to this, click [Yes], the window will then
move to the next step. 
If you disagree, click [No] and the installation program
will be canceled.
[Click !]
18. Digimax Viewer installation is successfully completed.
Click the [Finish] button to install Digimax Reader. 
* The system will not reboot even the [Yes, I want to
restart the computer now] option is selected.
* The real frame 18 can be different with the
illustration according to the system requirements.
17. A window will open, asking you to choose a folder to
which program icons will be added. 
Click [Next >] button.
[Click !]
[Click !]
16. A destination selection window will open. 
Click [Next >]. 
To copy to the files to another folder, click [Browse..]
and choose a folder you want.
[Click !]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							112
Setting up the application software
19. A window will be displayed as shown alongside.
Click the [INSTALL] button.
- Check the [MANUAL] button. Instructions for using
Digimax reader will be displayed.
- Click the [EXIT] button and Digimax reader
installation will be cancelled and a window for
installing PhotoImpression will be displayed. 
20. A window will open.
Click the [Next(N)>] button.
[Click !]
[Click !]
22. A destination selection window will open. 
Click [Next >].
To copy to the files to another folder, click [Browse...]
and choose a folder you want.
21. The Software License Agreement window will be
displayed. If you agree to this, click [Yes], the window
will then move to the next step. If you disagree, click
[No] and the installation program will be cancelled.
[Click !]
[Click !]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							113
Setting up the application software
26. The Software License Agreement window will be
displayed. 
If you agree to this, click [Yes], the window will then
move to the next step. 
If you disagree, click [No] and the installation program
will be canceled. 25. A Welcome window will be displayed.
Click the [Next >] button.
[Click !]
[Click !]
24. The PhotoImpression installation window will
be displayed as shown alongside.
Click the [OK] button.
[Click !]
23. Digimax Reader Installation is completed.
Click the [Finish] button and PhotoImpression
installation will be started. The system will not
reboot even if the [Yes, I want to restart the
computer now] option is selected. 
*The real frame 23 can be different with the illustration according to the system requirements.
[Click !]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							114
Setting up the application software
27. A destination selection window will open.
Click [Next >]. 
To copy to the files to another folder, click [Browse...] and
choose a folder you want.
28. The [Select Components] window will appear. 
Click [Next >] button.
29. A window will open, asking you to choose a folder to
which program icons will be added.
Click [Next >] button.
If you want to add the program icons to a different
folder, choose another folder, and then click [Next >]
button.
[Click !]
[Click !]
[Click !]
30. PhotoImpression Installation is completed.
Click the [Finish] button.
* The system will not reboot even if the [Yes, I want to
restart the computer now] option is selected. 
* The real frame 30 can be different with the illustration
according to the system requirements.
[Click !]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							115
31. To apply changes, you must restart the computer.
Select [Yes, I want to restart my computer now], and
then click [Finish]. 
[Click !]
Setting up the application software
33. Turn the camera power on.
[Found New Hardware Wizard] will open and the
computer will recognise the camera.
* If you have ever installed an image viewer program
or your OS is Windows XP, an image viewer
program will open.
If the image viewer program opens, the camera
driver was setup successfully.
32. After restarting the computer, connect the PC to the camera with the USB cable. 
34. If you can see [Removable Disk] under [My
computer], the camera driver installation was
successful.
Now you can transfer image files from the camera to
PC via the USB cable.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							116
Setting up the application software
If you have installed the camera driver, [Found New Hardware Wizard] may not open.
On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens
and a window asking you to select a driver file may appear. In this case, specify USB
Driver in the CD supplied. (for Windows 98 and 98 SE).
Before connecting the camera to the PC, You should first install the camera driver.
After installing the camera driver, you have to restart your PC.
If you connect the camera to the PC before installing the camera driver, the [Found New
Hardware Wizard] will open.
In this case, cancel the [Found New Hardware Wizard] and disconnect the camera.
Install the camera driver and connect the camera to the PC again.
Should the computer not find the camera driver after installation, please try one or more
of the following measures.
1. Delete the camera driver (p.120), and re-install the driver.
2. Refer to FAQ (p.129) to check for a possible solution to the problem.
3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host
Controller), download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com)
INFORMATION
Downloaded From camera-usermanual.com Samsung Manuals 
						

							117
Starting PC mode
If you connect the USB cable to a USB port on your PC and then turn on the power, the
camera will automatically switch to computer connection mode.
In this mode, you can download stored images to your PC through the USB cable.
Connecting the camera to a PC
1. In any mode with the exception of Voice Recording
mode, press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [USB] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Use the UP and DOWN buttons to select [Computer],
and then press the OK button.
[Using the USB cable with Cradle]
[Using the USB cable with Camera]
If you selected [Printer] in Step 4, when you connect the camera to your printer, the
[Connecting Printer] message will display and the connection will not be established.
In this case, disconnect the USB cable, and then follow the procedure from Step 2 and
onward.
If you insert the USB cable without inserting a memory card, [No Card!] message will display
and the camera is turned off. Please insert a memory card before inserting the USB cable. 
Back:Set : OK
Imprint
SoundComputer
USBPrinter
NORSetup
Downloaded From camera-usermanual.com Samsung Manuals 
						

							118
Starting PC mode
3. Select an image and press the right mouse
button.
4. A pop-up menu will open.
Click [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy] : copies files.
Downloading stored images
You can download the still images stored on the camera to your PCs hard disk and print
them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computers desktop display, select
[My computer] and double click [Removable Disk
DCIM 100SSCAM].
The image files will then be displayed.
5. Click a folder where you want to paste the file.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							119
Starting PC Mode
6. Press the right mouse button and a pop-up menu
will open. Click [Paste].
7. An image file is transferred from the camera to
your PC.
- By using [Digimax Viewer], you can see the stored images in the memory directly on the PC
monitor and you can copy or move the image files.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							120
Removing the USB Driver for Windows 98SE
To remove the USB driver, refer to the process shown below.
1. Trace [Start Settings] and click [Control Panel].
[Click !]
4. Uninstallation is complete. 
Click the [Finish] button and the window will
disappear. 2. Double-click [Add/Remove programs].
3. The [Add/Remove Programs Properties] window
will open. 
Click [Digimax U-CA5] and click the [Add/Remove]
button.
[Click !]
Downloaded From camera-usermanual.com Samsung Manuals