Samsung Digimax U Ca5 Users Manual

91
Selecting Video out type
The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the
camera is connected. PAL mode can support only BDGHI.
Setting the Video Out Type
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [Video Out] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4....

92
Selecting Video out type
NTSC  : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,
Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway.
When using a TV as an external monitor, you will need to select the external or AV
channel of the TV.
There will be a digital noise on the external monitor, but it is not a malfunction.
If the image is not in the centre of the screen, use the...

93
Quick view
If you enable Quick View before capturing an image, you can view the image you just
captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is
possible only with still images.
Setting Quick View
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [Quick View] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu...

94
Setting up the Mycam menu
You can set up a start up image, start up sound and shutter sound. Every camera working
mode (with the exception of Voice recording mode) has the MyCAM menu.
The items indicated by                        are default settings.
Menu tab Main menu Sub menu Page
Off LOGO
User Image 1 User Image 2
Off Sound 1
Sound 2 Sound 3
Off Sound 1
Sound 2 Sound 3
S.Image
S.Sound
SH.Soundp.94
p.95
p.95
You can select the image that is first displayed on the LCD monitor whenever the camera is...

95
Start up sound
Shutter sound
Setting the Startup Sound
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Mycam]
menu tab.
3. Select the [S.Sound] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
You can select the sound that is activated whenever the camera is...

96
Important notes
Be sure to observe the following precautions!
This unit contains precision electronic components. Do not use or store this unit in the
following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
Do not leave this camera in...

97
Important notes
Caution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of
the image sensor.
- Pay attention not to get fingerprints or foreign substances on the surface of the lens.
If the digital camera is not used for a long period, an electric discharge can occur. 
It is a good idea to remove the batteries and the memory card if you do not intend using the
camera for an extended period of time.
If the camera is exposed to an...

98
Warning indicator
There are several warnings that may appear on the LCD display
Card Error !
Memory card error
Turn off the camera power and turn it on again
Insert the memory card again
Insert the memory card and format the memory card (p.86)
No Card !
A memory card is not inserted
Insert a memory card
The camera can’t recognise the memory card
Insert the memory card again
Turn off the camera power and turn it on again
Card Locked !
The memory card is locked
SD memory card : Slide the write protect...

99
Warning indicator
Please check the following
Before contacting a service centre
Low Light !
When taking pictures in dark places
Use a tripod and take pictures in Flash Photography mode
Set USB
[USB] sub menu and connected device are not matched.
Reconfigure [USB] in the [Setup] menu. 
Out Of Number
When selecting too many printing pages in the PictBridge menu. 
Select printing page within the limitation. 
The camera doesn’t switch on
There is low battery capacity
Insert charged battery
Batteries are...

100
Before contacting a service centre
Camera does not take images when pressing the Shutter button
The memory card is not inserted
After turning the camera off, insert a new memory card
There is insufficient memory capacity
Delete unnecessary image files
The memory card has not been formatted
Format the memory card (p.86)
The memory card is exhausted
Insert a new memory card
The memory card is locked
Refer to [Card Locked !] error message (p.98)
The camera’s power is off
Turn the camera power on
The...