Samsung Digimax U CA5 User Manual

							71
Starting the slide show
Images can be displayed continuously at pre-set intervals.
You can view the slide show by connecting the camera to an external monitor.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [Slide]
menu tab.
Start the slide show: The slide show can start only in the
[Start] menu.
1. Use the Up/Down buttons to select the [Start] menu.
2. Press the OK button to start the slide show.
- Press the Pause button to pause the slide show.
- Press the Pause button (              ) again to resume the slide show.
- To stop the slide show, press the play & pause button, and then press the LEFT or RIGHT
button.
Setting play interval: Set the slide show play interval.
1. Select the [Interval] sub menu by pressing the UP/DOWN button and press the RIGHT
button.
2. Use the Up/Down buttons to select the desired interval.
3. Press the OK button to save the configuration.
Repeat setting : setting the slide show to repeat after the first cycle.
1. Use the Up/Down buttons to select the [Repeat] menu and press the Right button.
2. Use the Up/Down buttons to select the desired sub menu.
[On] selected : The slide show is repeated until cancelled.
[Off] Selected : The slide show is closed after one cycle.
3. Press the OK button to save the configuration.
The loading time depends on the image size and quality.
While the slide show is playing, only the first frame of a MOVIE file is displayed.
INFORMATION
Slide
Move :  Set:OK
Start
Interval 1 sec
Repeat Off


Downloaded From camera-usermanual.com Samsung Manuals 
						

							72
Starting the slide show
Protecting images
Configure slide show effects: Unique screen effects can be used for the slide show.
1. Select the [Effect] sub menu by pressing the UP/ DOWN button and press the RIGHT
button.
2. Use the Up/Down Button to select the type of effect.
[Cancel]  : Normal display.
[Effect 1] : Image is displayed slowly.
[Effect 2] : Image is displayed slowly from the centre
outwards.
[Effect 3] : Image moves from the top left.
[Effect 4] : The image slides diagonally from top left to
bottom right. 
3. Press the OK button to confirm the setting.
This is used to protect specific shots from being accidentally erased (Lock).
It also unprotects images that have been previously protected (Unlock).
Protecting Images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [Protect]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Select ] : Selection window for an image to be
protected/released is displayed.
- Up/Down/Left/Right : Select an image
- Zoom W/T Button : Protect/release the image
- Menu Button : Your changes will be saved and
the menu will disappear.
[All Pics] : Protect/release all saved images
- Zoom W/T Button : Protect/release the images
- Menu Button : Your changes will be saved and
the menu will disappear.
Back:Set : OK
IntervalCancel
Repeat Effect1
EffectEffect2Slide
Protect
Exit: MENU  Move : 
Select
All Pics


Set:OK WUnlockT
Set:OK WUnlockT
Downloaded From camera-usermanual.com Samsung Manuals 
						

							73
Protecting images
- If you protect an image, the protect icon will be displayed
on the LCD monitor. (An unprotected image has no
indicator)
- An image in LOCK mode will be protected from the
delete function or [Delete] functions, but will NOT be
protected from the [Format] function.
Deleting images
Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be
deleted. Remember that this will permanently delete unprotected images. 
Important shots should be stored on a computer before deletion takes place. The startup
image is stored in the cameras internal memory (i.e., not on the memory card) and it will not
be deleted even if you delete all files on the memory card.
Deleting images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [Delete]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Select ]: Selection window for an image to delete is
displayed.
- Up/Down/Left/Right : Select an image
- Zoom T Button : Select the image for deletion.
(       mark)
- OK Button : Press the OK Button to display the
confirmation message. Select the
[Delete] menu and press the OK
button to delete       marked
images. 
[All Pics] : Displays confirmation window. Select the
[Delete] menu and press the OK button to
delete all unprotected images. If there aren’t
protected images, all the images are deleted
and a [No Image!] message will display. 
4. After deletion, the screen will be changed to the play
mode screen.
Del:OK Select:T
Del:OK
Delete?
Delete
Cancel
Confirm:OK
Delete
Exit: MENU  Move : 
Select
All Pics


Downloaded From camera-usermanual.com Samsung Manuals 
						

							74
Resize
Change the resolution (size) of pictures taken. Select [User image] to save an image to be
the start-up image. The resized image will have a new file name.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [Resize]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
A large sized image can be resized to a smaller sized image, but not vice versa.
Only JPEG images can be resized. Movie clip(AVI) and Voice recording(WAV) files can’t
be resized.
You can change the resolution of only those files compressed in the JPEG 4:2:2 format.
The resized image will have a new file name. The [User Image] image is stored not on the
memory card but on the internal memory.
Only two [User Image] images can be saved. If you save a new [User Image] image, the
existing startup image will be deleted in order.
If the memory capacity is insufficient to store the resized image, a [Card Full!] message
will display on the LCD monitor and the resized image will not be stored.
INFORMATION
Resize2272X1704 2048X1536 1600X12001024X768640X480User image
2592 O O O O O O
2272 X O O O O O
2048 X X O O O O
1600 X X X O O O
1024 X X X X O O
640 X X X X X O
Image Resize Types
Exit: MENU                  Move : 2272X1704
2048X1536
1600X1200
Resize


Downloaded From camera-usermanual.com Samsung Manuals 
						

							75
Rotating an image
You can rotate the stored images by various degrees. Once the playback of the rotated
picture is finished, it will switch back to the original state.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [Rotate]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button.
4. Press the OK button and the rotated image will be displayed. 
If you display the rotated image on the LCD monitor, empty spaces may appear to the left
and right of the image. [Right 90˚] : Rotate picture
in a clock-wise direction[Left 90˚] : Rotate picture in a
counter-clock-wise direction[180˚] : Rotate picture 180
degrees
[Horizontal] : Rotate picture
horizontally[Vertical] : Rotate picture
vertically 
DPOF 
DPOF(Digital Print Order Format) allows you to embed printing information on your memory
card’s MISC folder. Select the pictures to be printed and how many prints to make.
The DPOF indicator will display on the LCD monitor when an image that has DPOF
information plays back. Images can then be printed on DPOF printers, or at an increasing
number of photo labs.
This function is not available for Movie clips and Voice recording files.
Exit: MENU  Move : 
Right 90˚
Left 90˚
180˚Rotate


Downloaded From camera-usermanual.com Samsung Manuals 
						

							76
DPOF : Standard
Images (except for movie clips and voice file) are printed as index type.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [Index] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button.
If [No] is selected : Cancel the index print setting.
If [Yes] is selected : The image will be printed in index
format.
5. Press the OK button to confirm the setting.
DPOF : Index
This function allows you to embed print quantity information on a stored image.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [Standard] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Select] : Selection window for an image to print is
displayed.
- Up/Down/Left/Right: Select an image to print.
- Zoom W/T Button: Select the number of prints.
[All Pics] : Configure number of prints for all pictures
except movie and voice files.
- W/T button : Select a number of prints
[Cancel] : Cancel the print setup.
5. Press the OK button to confirm the setting.
If an image carries DPOF instructions, the DPOF
indicator (         ) will show.
Set:OK W0 Prints T
Set:OK W0 Prints T
DPOF
Exit: MENU  Move : 
Standard Select
Index No
Size Select


DPOF
Back:Set : OK
Standard
Index No
Size Yes 
Downloaded From camera-usermanual.com Samsung Manuals 
						

							77
DPOF : Print size
You can specify the print size when printing images stored on the memory card.
The [Size] menu is available only for DPOF 1.1 compatible printers.
Setting the Print Size
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [Size] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Select] : Selection window for an image to be changed
printed size is displayed.
- Up/Down/Left/Right : Select an image.
- Zoom W/T Button : Change the print size.
- OK button : Your changes will be saved and the menu
will disappear.
[All Pics] : Change print size of all saved images.
- W/ T button : Select a print size
- OK button : Confirm the changed setting.
[Cancel] : Cancel all of the print size settings.
* DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7,
8X10
Set:OK WCancel       T
Set:OK WCancel           T
DPOF
Back:Set : OK
StandardSelect
Index All Pics
SizeCancel
Downloaded From camera-usermanual.com Samsung Manuals 
						

							78
[Using the USB cable with Cradle]
[Using the USB cable with Camera]
PictBridge
You can use the USB cable to connect this camera to a printer that supports PictBridge (sold
separately) and print the stored images directly. Movie clips and voice files cannot be printed. 
Setting up the camera for connection with the printer
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select [Setup] menu
tab.
3. Select [USB] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select [Printer] menu by pressing the UP/ DOWN button
and press the OK button.
Connecting the Camera to a Printer
Using the USB cable with Cradle : Connect the camera and the cradle. Connect the cradle to
a printer’s USB port with the supplied USB cable. 
Using the USB cable with Camera : 
Connect the camera to a printer’s USB port with the supplied USB cable.
If you selected [Computer] in Step 4, when you connect the camera to your printer, the
[Connecting Computer] message will display and the connection will not be established.
In this case, disconnect the USB cable, and then follow the procedure from Step 2 and
onward.
Setup
Back:Set : OK
Sound
USBComputer
LampPrinter
NOR
Downloaded From camera-usermanual.com Samsung Manuals 
						

							79
PictBridge: Picture Selection
Select pictures to print
1. The [Images] menu will appear.
2. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
When [One Pic] is selected : The PictBridge function will
be applied only to the
picture currently displayed.
When [All Pics] is selected : The PictBridge function will
be applied to all pictures,
excluding movie clips and voice files. Images : Select the pictures to be printed.
Printer Setup : Setting up printing(Auto Set/ Custom Set)
Print : Printing pictures
DPOF Print : Printing the DPOF files
Reset : Initializing the PictBridge functions
You can set up the following settings from the PictBridge menu.
[When [One Pic] is selected] [When [All Pics] is selected]
- Press the Up/Down button to select the number of prints. 
- Use the Left/Right button to select another picture and select the number of prints for
another picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number of prints.
Setting the Number of Copies to Print
- Select [One Pic] or [All Pics]. A screen where you can set the number of copies to print will
appear as shown below.
Images
Move:

0
Exit:Shutter Set:OK
10
PREV NEXT
0
Exit:Shutter Set:OK
One Pic
All Pics
Downloaded From camera-usermanual.com Samsung Manuals 
						

							80
PictBridge: Print Setting
Menu
Size Setting the size of the printing paperAuto, Postcard, 4X6, 2L, A4, Letter, A3 
Setting the number of pictures to be 
printed on a sheet of paper
Type Setting the quality of the printing paper Auto, Plain, Photo, Fastphot
QualitySetting the quality of the picture to be printedAuto, Draft, Normal, Fine
Date Setting whether to print the date Auto, Off, On
File Name Setting whether to print the file name Auto, Off, On
AUTO SET
1. Use the LEFT and RIGHT buttons to select the 
[Auto Set] menu tab.
2. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
[No] : [Custom Set] values are kept.
[Yes] : All values in the [Custom Set] are automatically
changed.
Some menu options are not supported in all manufacturer and printer models. If not
supported, the menus are still displayed in the LCD, but are not selectable.
If the setting values are not changed in the automatic/manual setting, the setting values are
automatically kept.
Custom Set : You can select the Paper Size, Print Format, Paper Type, Print Quality, Date
Print, and File Name Print menus for printed pictures.
Function Sub menu
The menus you can set up are as follows:
Auto Set
Move:

Custom Set
Back:Set : OK
Size Auto
LayOut Postcard
Type 4X6
Auto, Full, 1, 2, 4, 8, 9, 16 Layout 1. Use the LEFT and RIGHT buttons to select the 
[Custom Set] menu tab.
2. Use the UP and DOWN buttons to select the desired
submenu value, and then press the RIGHT button.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button. 
No
Yes
Downloaded From camera-usermanual.com Samsung Manuals