Samsung Digimax U CA5 User Manual

11
Identification of features
Back
Top
You can recharge your rechargeable battery, print a captured image and download images
with the cradle. (Refer to page 15, 78, 117)
Battery holder
Memory card slot
Battery chamber Battery chamber coverFLASH/
LEFT button
MENU/ OK button
Macro / DOWN button
Play & Pause button
SELF-TIMER/
REMOTE/
RIGHT button
Voice memo/ UP button
Side/ 5-function button
Cradle
Camera connection
terminal
USB port
AV connection terminalDC input
connection point
Downloaded From...

12
Identification of features
Still image mode
You can select from AUTO(          ), MANUAL(         ) or
SCENE mode. In SCENE mode, you can select the NIGHT,
PORTRAIT, CHILDREN, LANDSCAPE, CLOSE UP, TEXT
RECOGNITION, SUNSET, DAWN, BACKLIGHT,
FIREWORKS and BEACH&SNOW scene menu.
Voice recording modeA movie clip can be recorded for as long as the available
recording time of the memory capacity allows.
Image size and type are listed below.
- Image size : 640X480, 320X240, 160X128 (user selectable)  
-...

13
Identification of features
Mode icons
Function lamp & Self-timer lamp
Function Description
Power onThe lamp blinks and turns off when the camera is ready to take a picture
The lamp blinks while saving the image data and turns off when the
camera is ready to take a picture
While movie recording The lamp blinks at a 2-second interval
While voice recording The lamp blinks at a 2-second interval
Transmitting Data The lamp blinks
For the first 8 seconds, the lamp blinks at 1 second intervals.
For the final...

14
Connecting to a Power Source
If you have access to a mains supply, using an SAC-41 (for both Charger and AC adapter)
allows the camera to be used for long periods of time.Plug the SAC-41 (for both Charger and
AC adapter) into the connection point (DC IN 4.2V) on the camera. 
* Insert the rechargeable batteries when using an SAC-41 (for both Charger and AC adapter). 
Using the SAC-41(for both Charger and AC adapter)
[Using the AC adapter with Cradle] [Using the AC adapter with Camera]
Important...

15
Connecting to a Power Source
Charging with the camera
- Insert the rechargeable battery into the
battery chamber. 
- Put the SAC-41 (for both Charger and AC
adapter) into your power socket and DC
input connection point of the camera.
Always turn off the power before taking the SAC-41 (for both Charger and AC adapter)
out of the mains supply.
As with all mains powered devices, safety is important. Ensure that neither the camera
nor adapter comes into contact with water or metallic materials.
Please...

16
Connecting to a Power Source
If the charging LED of the SAC-41 does not turn
on or blink after inserting the rechargeable battery,
please check whether the batteries are inserted
correctly.
Please check the battey charging status with
the charging LED of SAC-41. 
Important information about battery (SLB-1137) charging
Charging LED
If there is a charging error, please check all the power connections are in place.
A USB cable for transmitting data cant be used for charging the rechargeable battery....

17
Connecting to a Power Source
Using the batteries: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity(+/-).
1. Open the battery chamber
cover by pushing in the
direction of the arrow.2. Insert the batteries taking
note of the polarity (+ / -).3. To close the battery
chamber cover, push it
until it clicks.
Battery status Battery indicator
The batteries are fully
chargedPrepare new batteriesThere is no battery...

18
Instructions on how to use the memory card
Be sure to format the memory card (see p.86) if you are using a newly purchased memory for
the first time, if it contains data that the camera cannot recognise, or if it contains images
captured with a different camera.
Turn off the camera power whenever the memory card is being inserted or removed.
Repeated use of the memory card will eventually reduce the memory card’s performance.
Should this be the case, you will need to purchase a new memory card. 
Wear...

19
Instructions on how to use the memory card
Dont remove the memory card when the function lamp is blinking as this may cause
damage to data in the memory card.
INFORMATION
[ SD (Secure Digital) memory card ]
Write
protect
switch
Label
Card
pins
The camera can use SD Memory Cards and MMC (Multi Media Cards). Please consult the
enclosed manual for using the MMC Cards.
The SD memory card has a write protect switch
that prevents image files from being deleted or
formatted. By sliding the switch to the...

20
Inserting the memory card
3. To close, push the battery chamber cover until you hear
a click. If the memory card does not slide in smoothly,
do not attempt to insert it by force. Check the direction of
insertion, and then insert it correctly. Do not insert the
memory card the wrong way round. Doing so may
damage the memory card slot. 2. Have the front of the memory card facing toward the
front of the camera (lens) and the card pins toward the
back of the camera (LCD monitor), and then push the
memory...