Samsung Digimax U CA5 User Manual

101
Before contacting a service centre
The camera buttons do not operate
Camera malfunction
Remove /re-insert batteries and switch the camera on
A card error has occurred while the memory card is in the camera.
Incorrect memory card format
Re-format the memory card 
The images dont play back
Incorrect file name (Violation of DCF format)
Do not change the image file name
Colour of image is different to the original scene 
White balance setting is incorrect
Select appropriate White balance
Images are too...

102
Specifications
Type 1/2.5 CCD
Effective Pixel Approx. 5.13 Mega-pixel  
Total Pixel Approx. 5.25 Mega-pixel
SHD Lens f = 5.8 ~ 17.4mm    
(35mm film equivalent : 35 ~ 105 mm)
F No. F2.8 ~ F4.8
Still Image mode : 1.0X ~ 5.0X     
Play mode : 1.0X ~  10.1X (depends on image size)
LCD Monitor 1.8 colour TFT LCD (118,080 dot)
Type TTL auto focus
Normal : 80cm ~ infinity
Macro : 5 ~ 80cm (Wide), 50 ~ 80cm (Tele)
Auto Macro : 5cm ~ infinity (Wide), 50cm ~ infinity (Tele)
Type Mechanical and Electronic...

103
Specifications
2592 : 2592x1944,  2272 : 2272x1704,    
2048 : 2048x1536,  1600 : 1600x1200, 
1024 : 1024x768,  640 : 640x480
2592 : Super fine 11,   Fine 21,   Normal 33
2272 : Super fine 14,   Fine 26,   Normal 40
2048 : Super fine 17,  Fine 33,   Normal 50
1600 : Super fine 30,  Fine 51,   Normal 75
1024 : Super fine 60,  Fine 106,   Normal 129
640 : Super fine 121,  Fine 165,   Normal 202
* These figures are measured under Samsung’s standard
conditions and may vary depending on shooting...

104
Software Notes
Please ensure that you read the instruction manual carefully before use.
The attached software is a camera driver and image editing software tool for Windows.
Under no circumstances should all or part of either the software or the user manual be
reproduced.
Copyrights for software are licensed only for use with a camera.
In the unlikely event of a manufacturing fault, we will repair or exchange your camera. 
We cannot, however, be held responsible in any way for damage caused by...

105
About the software
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following
window should automatically run.
Before connecting the camera to the PC,
you should first install the camera driver.
Camera driver : This enables images to transfer between the camera and PC.
This camera uses the USB Storage Driver as the camera driver. You can use the camera as
a USB card reader. After installing the driver and connecting this camera to the PC, you can
find [Removable Disk]...

106
About the software
Be sure to check the system requirements before installing the driver.
You should allow 5~10 seconds for running the automatic setup program according to the
capability of the computer. If the frame does not show, run the [Windows Explorer] and
select [Samsung.exe] in the CD-ROM Drive root directory.
INFORMATION
Digimax Reader : Text recognition program
You can save an image file that was captured in the TEXT mode as a text file with this
program. This software is only compatible...

107
Setting up the application software
To use this camera with a PC, install the application software first.
After this has been done, the stored images in the camera can be moved to the PC and can be
edited by an image editing program.
You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. Click the [Install] menu in the Autorun frame.
The camera driver is installed automatically.
Close other programs before installing...

108
6. The Software License Agreement window will be
displayed. If you agree to this, select [I accept the
agreement] and click [Next>] button. the window will
then move to the next step. If you disagree, select [I do
not accept the agreement] and click [Cancel] button.
The installation program will be cancelled.
The XviD codec is distributed according to the GNU General Public License and everyone
can copy, distribute and change this codec. For more information, see the License
documents. 
[Click !]
4....

109
Setting up the application software
7. The XviD information window will display. 
Click the [Next>] button. 
8. The destination selection window will open. 
Click [Next >] button.
To copy to the files to another folder, click [Browse...]
and choose a folder you want.
[Click !]
[Click !]
10. The [Select Additional Tasks] window will display. 
Select the additional tasks and click the [Next>] button. 
9. A window will open, asking you to choose a folder to
which program icons will be added. 
Click...

110
Setting up the application software
11. The XviD codec is ready to install. 
Click the [Install] button.
[Click !]
12. Installation is complete.
Click the [Finish] button.
[Click !]
If you select [Exit] at step 13, the application program installation will be cancelled.
INFORMATION 
13. A window where you can choose the program
you want to install will appear. Click [Install].
For information on application software, please
refer to page 105, 106.
14. The [Digimax Viewer 2.1] installation window
will...