Samsung Digimax U Ca401 Users Manual

71
Specification
Type 1/2.5 CCD
Effective Pixels Approx. 4.0 Mega –pixel
Total Pixels Approx. 4.2 Mega –pixel 
SHD Lens f=5. 8mm  
(35mm film equivalent : 35mm)
F No. F.3.2
Still Image mode: 1.0X~ 4.0X,
Play mode: 1.0X~8.0X
Optical ViewfinderOptical virtual image viewfinder
LCD Monitor 1.5 color TFT LCD
Type TTL Auto Focus
Normal: 60cm ~ infinity, 
Macro: 6cm ~ 60cm
Type Mechanical and Electronic shutter
Speed Normal Mode: 4~ 1/2,000 sec.(Night Scene:  8~1/2,000 sec.)
Control Program AE Metering (Multi....

72
Specification
Internal memory: 32MB flash memory
External memory (optional):MS Duo (Upto128MB guaranteed) 
Still Image: JPEG (DCF), DPOF, EXIF
Movie Clip: AVI (MJPEG)    Audio : WAV
2272: 2272X1704, 2048: 2048X1536,
1600: 1600X1200, 1024: 1024X768, 640: 640X480 
2272 : Super fine 14, Fine 28, Normal 43
2048 : Super fine 16, Fine 35, Normal 53
1600 : Super fine 29, Fine 58, Normal 80
1024 : Super fine 67, Fine 142, Normal 165
640 : Super fine 159, Fine 306, Normal 360
* These figures are measured under...

73
Software Notes
Please ensure that you read the instruction manual carefully before use.
The attached software is a camera driver and image editing software tool for Windows.
Under no circumstances should all or part of either the software or the user manual be
reproduced.
Copyrights for software are licensed only for use with a camera.
In the unlikely event of a manufacturing fault, we will repair or exchange your camera. 
We cannot, however, be held responsible in any way for damage caused by...

74
About the software
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following
window should automatically run.
Before connecting the camera to the PC,
you should first install the camera driver.
Camera driver : This enables images to transfer between the camera and PC.
This camera uses the USB Storage Driver as the camera driver. You can use the camera as
a USB card reader. After installing the driver and connecting this camera to the PC, you can
find [Removable Disk] in...

75
To use this camera with a PC, install the application software first. After this has been done, the
stored images in the camera can be moved to the PC and can be edited by an image editing
program.
You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
Setting up the application software
Close other programs before installing the application software.
Before installing the application software, disconnect the USB...

76
Setting up the application software
If you select [Exit] at the step 3, the application program installation will be cancelled.
INFORMATION 
If you select [Cancel] at step 4, a window for installing PhotoImpression will be displayed.
INFORMATION 
3. A window for which you can select application
software will be displayed. Select the
application program and click the [Install]
button. 
Refer to page.74 for more information about
the application program.
4. Install Digimax Viewer. 
Click [Next >]...

77
Setting up the application software
8. Digimax Viewer installation is successfully
completed. Click the [Finish] button to install
PhotoImpression.The system will not reboot
even the [Yes, I want to restart the computer
now] option is selected.
*The frame 8 may not appear according to the
system requirements.
9. Digimax Viewer Installation is completed. 
The PhotoImpression installation window will
be displayed as shown alongside.
Click the [OK] button.
If you click [Cancel] in Step 9, the...

78
Setting up the application software
12. A destination selection window will open.
Click [Next >]. To copy to the files to another
folder, click [Browse...] and choose a folder
you want.
13. The [Select Components] window will appear.
Click [Next >] button.
14. A window will open, asking you to choose a
folder to which program icons will be added.
Click [Next >] button. 
If you want to add the program icons to a
different folder, choose another folder, and
then click [Next >] button.
[Click!]
[Click!]...

79
Setting up the application software
17. After restarting the computer, connect the PC to the camera with the USB cable.
18. Turn the camera power on. [Found New
Hardware Wizard] will open and the computer will
recognize the camera.
If you have ever installed an image viewer
program or your OS is Windows XP, an image
viewer program will open. 
If the image viewer program opens, the camera
driver was setup successfully.
19. If you can see [Removable Disk] under [My
computer], the camera driver...

80
Setting up the application software
If you have installed the camera driver, [Found New Hardware Wizard] may not open.
On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens
and a window asking you to select a driver file may appear. In this case, specify the [USB
Driver] folder on the supplied software CD.
When connecting the camera to your PC, it is recommended that you use an AC power
adapter.
Before connecting the camera to the PC, You should first install the camera...