Samsung Digimax U CA401 User Manual

11
Identification of features
Front & Top
Back
Shutter button
Function
Lamp Viewfinder
DC input
connection
point USB/ AV
connection
terminal Flash
Lens Power button 
Microphone
LCD monitorViewfinderAutofocus lamp(Green)Flash status lamp(Red)
Play mode /
LCD button
Strap eyeletMode switch
Speaker
Zoom W button
(Thumbnail)
Zoom T button
(Digital zoom)
* When using the digital zoom to take a picture, the composition of the picture may be different
depending on whether you are using the LCD monitor or the...

12
Identification of features
Voice recording modeA movie clip can be recorded for as long as the available
recording time of the memory capacity allows.
Image size and type are listed below.
- Image size : 640X480, 320X240 
(User selectable)      
- Movie clip file type : *.avi (MJPEG)
A voice recording can be recorded for as long as the
available recording time of the memory capacity allows.
(Max : 1 hour)
Voice recording file type : *.wav
Movie clip mode
You can select the desired working mode by...

13
Identification of features
Still image mode
You can select from AUTO(          ), Night(       ), 
MYSET(       ), TEXT(       ) modes. 
Lamp
Type Function Lamp Camera Status Lamp LCD Monitor
When turning on the
powerBlue lamp blink and then turns off when
the camera is ready to take a pictureGreen lamp blinks X 
When the camera is in focus (when the
SHUTTER button is pressed halfway)X Green lamp lights upAutofocus mark
lights up green
When the camera is out of focus (when
the SHUTTER button is...

One LED blinks Two LEDs blink Three LEDs turn on
Charging 0% charged. About 50% charged. About 100% charged.
14
Following function lamp indicates charging status of the rechargeable battery.
Connecting to a Power Source
Function lamp display 
(Blue LED)
If the function lamp display does not work even after inserting the rechargeable battery and
connecting the power supply, please double-check the rechargeable battery polarity. (p. 16)
Please do not connect the AC adapter after inserting a...

15
Connecting to a Power Source
Important information about battery usage
When the camera is not used, turn off the camera power.
Please do not charge the non rechargeable battery. It may cause an explosion or fire.
Please remove the batteries if the camera will not be used for long periods.
Batteries can lose power over time and are prone to leaking if kept inside the camera.
Low temperatures (below 0) can affect the performance of the batteries and you may
experience reduced battery life.
Batteries...

16
Connecting to a Power Source
Using the batteries
Battery status Battery indicator
The batteries are fully
charged.Prepare new batteries.There is no battery capacity.
Replace with new batteries.
There are 3 indicators for battery condition that are displayed on the LCD monitor.
Removing the battery
1. Turn off the camera power. Open the battery chamber
cover and unlock the battery by pushing the battery lock
lever. The battery will pop up slightly.
2. Remove the battery in the direction indicated and...

17
Precautions on Using the Memory Stick Duo
This camera operates only with a Memory Stick Duo.
Some models of Memory Stick Duo media do not have the write-protect switch (B).
Card pins(A)
Write
protect
switch(B)
Label(C)
[ Memory Stick Duo ]Front Back
Do not touch the card pins (part A)
with your fingers or with metal objects.
Do not press hard when writing on the
label (part C).
If you insert the Memory Stick Duo
into the Memory Stick Duo adapter,
you will be able to use it with  a
Memory...

18
Precautions on Using the Memory Stick Duo
Maintenance of the Memory Stick Duo
(Hereafter the Memory Stick Duo is referred to as the Memory Card.) 
The camera comes with 32MB of internal flash memory, allowing you to store images and
movie clips in the camera. However, you can expand the memory capacity by using an
optional memory card so that you can store more images and movie clips. 
Be sure to format the memory card (see p. 58) if you are using a newly purchased memory
for the first time, if it...

19
Inserting the memory card
1. Turn off the camera power and pull the battery chamber
cover in the direction of the arrow to open.
2. Have the front of the memory card face toward the front of
the camera (lens) and the card pins toward the back of the
camera(LCD monitor), and then push the memory card into
the card slot until you hear a click.
3. To close, push the battery chamber cover until you hear a
click. If the memory card does not slide in smoothly, do not
attempt to insert it by force. Check the...

20
LCD monitor indicator
No. Description  Icons  Page
1 Battery p.16
2 Recording mode p.12~13
3 Camera shake warning p.23
4 Flash p.28
5 Self-timer p.29
6 Macro p.26
7 Metering p.36
8 Exposure compensationLTp.40
9  Auto focus frame
10  Time 01:00 PM p.59 ~ 60
11  Date 2004/05/01 p.59 ~ 60
12  MS DUO indicator p.19
13 White Balance p.37
14 ISO p.36
The LCD monitor displays information about the shooting functions and selections.
[ Image & Full Status ]
Downloaded From camera-usermanual.com Samsung Manuals