Samsung Digimax U Ca3 Users Manual

11
Identification of features
Front & Top
Back & Bottom
Mode switch
Viewfinder
Auto Focus
lamp
Microphone
Strap eyeletSpeaker
Lens
Power button 
Flash
Shutter button
Function lamp
LCD
monitor ViewfinderCamera status lamp
WIDE/THUMBNAIL button
TELE/Digital zoom button
+&-/ DELETE button
USB/ AV 
connection terminal
DC input
connection point
Tripod socket LCD button
PLAY mode
button
* When using the digital zoom to take a picture, the composition of the picture may be different
depending on whether you are...

12
Identification of features
Voice recording modeA movie clip can be recorded for as long as the available
recording time of the memory capacity allows.
Image size and type are listed below.
- Image size : 320X240, 160X120 
- Movie clip file type : *.mov (MPEG4)
A voice recording can be recorded for as long as the
available recording time of the memory capacity allows.
(Max: 1 hour)
- File type : *.wav(G. 711)
Movie clip mode
You can select the desired working mode by using the mode switch located on...

13
Identification of features
Still image mode
There are two ways in which to provide the camera with power. You can use batteries or
alternatively, you can use an AC(100 ~ 250V) Adapter (DC 3.3V 2.0A).
We recommend using batteries for a digital camera.
(use batteries that are within a year of their date of manufacture) The batteries are listed below.
Non rechargeable batteries : Duracell CP-1 battery
Rechargeable batteries : Digimax power pack (SLB-1037)
Battery pack : Digimax Battery Pack (SBP-3603)...

14
Connecting to a Power Source
Important information about battery usage
Do not recharge the non rechargeable batteries. This may cause an explosion.
Please remove the batteries if the camera will not be used for long periods.
Batteries can lose power over time and are prone to leaking if kept inside the camera.
Low temperatures (below 0) can affect the performance of the batteries and you may
experience reduced battery life.
Batteries will usually recover at normal temperatures.
During extended use of...

15
Connecting to a Power Source
Using the batteries: If the camera does not turn on after you have inserted batteries, please
check whether the batteries are inserted with the polarity(+ and-). 
The Digimax Battery Pack is a rechargeable external Li-ion
battery for use with most digital cameras. These optional
battery packs provide long lasting power and their operating
performances are much improved over Ni-MH and Alkaline
batteries. This is due to the mass storage lithium ion cell.  
Refer to the...

16
Precautions on Using the Memory Stick Duo
Do not insert the Memory Stick Duo on its own into a Memory Stick-compatible device.
Do not insert the Memory Stick Duo adapter into a Memory Stick-compatible device without
attaching the Memory Card Duo to the adapter. Using it without the Memory Stick Duo may
adversely affect the device into which it is inserted.
Be sure to check the proper direction of insertion before use .
Insert the Memory Stick Duo all the way into the Memory Stick Duo adapter. 
If the...

17
Precautions on Using the Memory Stick Duo
Maintenance of the Memory Stick Duo
(Hereafter the Memory Stick Duo is referred to as the Memory Card.) 
Be sure to format the memory card (see p. 66) if you are using a newly
purchased memory for the first time, if it contains data that the camera
cannot recognize, or if it contains images captured with a different camera.
Turn off the camera power whenever the memory card is being inserted or removed.
Repeated use of the memory card will eventually reduce...

18
Inserting the memory card
1. Turn off the camera’s power and pull the memory card
cover in the direction of the arrow to open.
2. Have the front of the memory card facing toward the front
of the camera (lens) and the card pins toward the back of
the camera (LCD monitor), and then push the memory
card into the card slot until you hear a click.
3. To close, push the card cover until you hear a click. If the
memory card does not slide in smoothly, do not attempt to
insert it by force. Check the direction...

19
When Using the Camera for the First Time
If the camera is turned on for the first time, a menu will be displayed to set date, time and
language in the LCD monitor. This menu will not be displayed after setting up the date, time
and language. Set up the date, time and language before using this camera. 
Setting up the date, time and date type
1. Select the [DATE.TIME] menu by pressing the UP/DOWN
button and press the RIGHT button.
2. Select the desired sub menu by pressing the UP/ DOWN/
LEFT/ RIGHT...

20
LCD monitor indicator
The LCD monitor displays information about the shooting functions and selections.
[ Image & Full Status ]
No. Description Icons Page
1Batteryp.15
2Recording modep.12~13
3Camera shake warningp.23
4Flashp.29
5Self-timerp.30
6 Voice memop.26
7 Macrop.27
8 Meteringp.40
9 Auto focus frame
10 Time01:00 PM p.19, 67
11 Date2003/01/01 p.19, 67
12 Exposure compensationp.31
13 
White Balancep.32
Downloaded From camera-usermanual.com Samsung Manuals