Samsung Digimax S800 User Manual

							
]50
^
DPOF : Print size
Copy To Card

ˆThis enables you to copy image files, movie clips and voice recording files to the
memory card.

ƒCopying to the Memory Card
1. Press the play mode button and press the menu
button.
2. Select the [COPY TO CARD] menu tab by
pressing the LEFT / RIGHT button.
3. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
- [No] : Cancels Copy to Card.
- [Yes] : All images, movie clips and voice recording files saved in the internal
memory are copied to the memory card after the [Processing!]
message is displayed. After copying has been completed, the
screen will return to play mode.
ƒWhen this menu is selected without inserting a memory card, you can select
the [COPY TO CARD] menu but the menu can’t be run.

ƒIf there is not enough space available in the memory card to copy saved
images in the internal memory (20MB), the [COPY TO CARD] command
will copy only some of the images and display [Memory Full!] message.
Then the system will return to the playback mode. Please be sure to delete
any unnecessary files to free up space before inserting the memory card
into the camera.

ƒWhen you move the images that are stored in the internal memory by doing
[COPY TO CARD] to the card, the next number of file names will be created
in the card to avoid duplication of the file name. 
- When the [Reset] of the [File] setup menu is set : The copied file names
start from after the last stored file name. 
- When the [Series] of the [File] setup menu is set : The copied file names
start from after the last captured file name. After completing [COPY TO
CARD], the last stored image of the last copied folder is displayed on the
LCD monitor. INFORMATION
COPY TO CARD
Exit:MENU         Move:   


No
Yes

ˆYou can specify the print size when printing images stored on the memory card.
The [Size] menu is available only for DPOF 1.1 compatible printers.

DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10 
ƒSetting the Print Size
1. Press the play mode button and press the menu
button.
2. Press the LEFT / RIGHT button and select the
[DPOF] menu tab.
3. Select the [Size] menu by pressing the UP /
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
[Select] : Selection window for an image to be
changed printed size is displayed.
- 
Up / Down / Left / Right : 
Select an image.
- Zoom W / T Button : Change the print size.
- OK button : Your changes will be saved
and the menu will
disappear.
[All Pics] : Change print size of all saved images.
- W / T button : Select a print size
- OK button : Confirm the changed setting.
[Cancel] : Cancel all of the print size settings.
ƒDepending on the manufacturer and print model, canceling the printing may
take a little longer for the printer to process.INFORMATION 
Set:OK
W
Cancel      

T
DPOF
Standard
Index
SizeBack:
Set:OK
Select
All Pics
CancelSet:OK W

Cancel      

T
Downloaded From camera-usermanual.com Samsung Manuals 
						

							
]51
^
On Screen Display information PictBridge

ˆYou can use the USB cable to connect this camera to a printer that supports
PictBridge (sold separately) and print the stored images directly. Movie clips and
voice files cannot be printed.

ƒSetting up the camera for connection with the printer
1. In any mode with the exception of Voice Recording
mode, press the MENU button.
2. Press the LEFT / RIGHT button and select
[SETUP] menu tab.
3. Select [USB] menu by pressing the UP / DOWN
button and press the RIGHT button.
4. Select [Printer] menu by pressing the UP / DOWN
button and press the OK button.
SETUP
Format
Date&Time
Imprint
Sound
USB Back:
Set:OK
Computer
Printer
[Using the USB cable with Cradle][Using the USB cable with Camera]

ˆYou can check shooting information about the displayed image.

ƒHow to select the type of information you want to see
1. Press the play mode button and press the menu
button.
2. Select the [OSD INFORMATION] menu tab by
pressing the LEFT / RIGHT button.
3. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
OSD INFORMATIONExit:MENU         Move:   


Full
Basic
OSD Off

ˆConnecting the Camera to a Printer

ƒUsing the USB cable with Cradle (Optional) : 
Connect the camera and the cradle. Connect the cradle to a printer’s USB
port with the supplied USB cable. 

ƒUsing the USB cable with Camera : 
Connect the camera to a printer’s USB port with the supplied USB cable.
[Full] [Basic] [OSD Off]
ISO : 50
Av : F 2.8
Tv : 1/30
Flash : On
3264 X 2448
2006/01/01
Downloaded From camera-usermanual.com Samsung Manuals 
						

							
]52
^
PictBridge : Picture Selection
PictBridge : Print Setting
Exit:Shutter Set:OK

ƒSetting the Number of Copies to Print
- Select [One Pic] or [All Pics]. A screen where you can set the number of copies
to print will appear as shown below.
PREV

NEXT
0
Exit:Shutter Set:OK
0
AUTO SET
No
YesExit:MENU         Move:   



ˆAUTO SET
1. Use the LEFT and RIGHT buttons to select the 
[AUTO SET] menu tab.
2. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the OK
button.
[No] : [CUSTOM SET] values are kept.
[Yes] : All values in the [CUSTOM SET] are
automatically changed. 
ˆEasy printing
When you connect the camera to printer in the Play
back mode, you can print a picture easily. 
- Pressing the printer(         ) button :
Currently displayed image will be printed with the
printer’s default setting. 
- Pressing the Left / Right button : 
Selects a previous / next image.

ˆSelect pictures to print
1. Press the Menu button. 
2. The [IMAGES] menu will appear.
3. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the OK
button.
When [One Pic] is selected : The PictBridge
function will be
applied only to the picture currently displayed.
When [All Pics] is selected : The PictBridge function will be applied to all
pictures, excluding movie clips and voice files. 
If you selected [Computer] in Step 4, when you connected the camera to your
printer, the [Connecting Computer] message will display and the connection will
not be established. In this case, disconnect the USB cable, and then follow the
procedure from Step 2 and onward. Or, press the Printer button and the camera
is connected to the printer displaying the [Connecting Printer] message. But, the
camera may not connect to the printer, depending on the manufacturer and
model of the printer.
IMAGES
One Pic
All PicsExit:MENU         Move:   Print:                      Menu:OK


[When [One Pic] is selected] [When [All Pics] is selected]
- Press the Up / Down button to select the number of prints. 
- When [One Pic] is selected : Use the Left / Right button to select another
picture. After selecting another picture, select the number of prints for another
picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number of
prints.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							
]53
^
PictBridge : Print Setting PictBridge : Printing

ˆPrinting Pictures
1. Use the LEFT and RIGHT buttons to select the [PRINT] menu tab.
2. Use the UP and DOWN buttons to select the desired sub menu value, and
then press the OK button.
[Standard] : Print the pictures stored in the
memory card in set numbers. 
One picture is printed on one
piece of paper.
[Index] : Print multiple images on one
sheet of paper.
3. The screen shown on the right will appear and the
picture will be printed. If no picture is selected, the
[No Image!] message will be displayed. Press the
LEFT button while printing to cancel the printing
and the [PRINT] menu is displayed.

Number of pictures in an index print varies
depending on the printer used.
001 / 001PRINT
Standard
IndexExit:MENU         Move:   


Cancel:

Now Printing

ˆCustom Set : You can select the Paper Size, Print Format, Paper Type, Print
Quality, Date Print, and File Name Print menus for printed pictures.
1. Use the LEFT and RIGHT buttons to select the 
[CUSTOM SET] menu tab.
2. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the
RIGHT button.
3. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the OK
button. 

Some menu options are not supported in all manufacturer and printer models. 
If not supported, the menus are still displayed in the LCD, but are not selectable.

If the setting values are not changed in the automatic / manual setting, the
setting values are automatically kept.Menu
Setting the size of the printing
paper
Setting the number of pictures to
be printed on a sheet of paper
Setting the quality of the printing
paper
Setting the quality of the picture
to be printed
Setting whether to print the date
Setting whether to print the file
name Size
Layout
Type
Quality
Date
File Name
Auto, PostCard, Card, 4x6, L, 2L,
Letter, A4, A3
Auto, Full, 1, 2, 4, 8, 9, 16, Index
Auto, Plain, Photo, FastPhoto
Auto, Draft, Normal, Fine
Auto, Off, On
Auto, Off, On
FunctionSub menu
CUSTOM SET
Size
Layout
Type
Quality
DateAuto
Auto
Auto
Auto
AutoExit:MENU         Move:   


Downloaded From camera-usermanual.com Samsung Manuals 
						

							
]54
^
PictBridge : DPOF Printing Setup menuPictBridge : Reset
1. Use the LEFT and RIGHT buttons to select the
[RESET] menu tab.
2. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the OK
button.
If [No] is selected : Settings will not be reset.
If [Yes] is selected : All print and image settings will
be reset.

Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came with your
printer.
RESET
No
YesExit:MENU         Move:   




ˆDPOF Print : This allows you to directly print the files with DPOF information.

ˆInitialises user-changed configurations.1. Use the LEFT and RIGHT buttons to select the 
[DPOF PRINT] menu tab.
2. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the 
OK button.
[No] : Cancel the printing
[Yes]  : Directly print the file with the DPOF
information

Depending on the manufacturer and printer model, some menus may not be
available. 
When a printer does not support DPOF, the menu is still displayed but not
available.
DPOF PRINT
No
YesExit:MENU         Move:   



Menu tab Main menu Sub menu Secondary menu Page
Series -Reset -
Off, 1, 3, 5, 10 min - p.56
No -Yes -
06/01/01 13:00 -yy/mm/dd -dd/mm/yy -mm/dd/yy -Off -Off -Date -Date&Time -
Off -Low -Medium -
High -
ENGLISH FRANÇAIS
DEUTSCH ESPAÑOL ITALIANOP”CCK»…
PORTUGUÊS
DUTCH
DANSK SVENSKA SUOMI
BAHASA
POLSKI Magyar
--
File
Power OffLanguageFormat
Date&Time
Imprint
Soundp.55
p.56
p.57
p.58 p.57 p.57 
ˆIn this mode, you can set up basic settings. You can use the setup menu in all
camera modes, except Voice Recording mode.         
The items indicated by                    are default settings.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							
]55
^
Setup menu

Menus are subject to change without prior notice.Menu tab Main menu Sub menu Secondary menu Page
Computer
-
Printer
-
Off
-
On
-
Dark
-
Normal
-
Bright
-
NTSC -PAL -
Quick View Off / 0.5, 1, 3 sec -
p.59
No
-
Yes
-
Alkaline
-
Ni-MH -
AF Lamp
LCD
Video Out
Reset
Battery typep.58
p.58
p.59
p.60
p.60USBp.58

ƒAssigning File Names
1. In any mode with the exception of Voice Recording
mode, press the MENU button.
2. Press the LEFT / RIGHT button and select the
[SETUP] menu tab.
3. Select the [File ] menu by pressing the UP / DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
[Series] : New files are named using numbers that follow the previous
sequence, even when a new memory card is used, or after
formatting, or after deleting all pictures. 
[Reset] : After using the reset function, the next file name will be set from
0001 even after formatting, deleting all or inserting a new memory
card.
5. Press the menu button twice and the menu will disappear.
- The first stored folder name is 100SSCAM, and the first file name is
S8000001.
- File names are assigned sequentially from S8000001 S8000002 ~ 
S8009999.
- The folder number is assigned sequentially from 100 to 999 as follows: 
100SSCAM 101SSCAM ~ 999SSCAM.
- The files used with the memory card conform to the DCF(Design rule for
Camera File systems) format.
[ File name ]
ˆThis function allows the user to select the file naming format.
SETUP
File 
Power Off
Language
Format
Date&TimeSeries
ResetBack:
Set:OK
Downloaded From camera-usermanual.com Samsung Manuals 
						

							
]56
^
Setup menu
[ Auto power off ]
ˆThis function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.

ƒSub menus
[Off] : The power off function will not
operate.
[1, 3, 5, 10 min] : The power will turn off automatically
if not used for the period of time
specified.
- After replacing the battery, the power off setting will
be preserved. 
- Note that the automatic power off function will not operate if the camera is in
PC mode, slide show, playing back a voice recording, playing back a movie clip
and taking a composite shot.
SETUP
File 
Power Off
Language
Format
Date&TimeOff
1 min
3 min
5 min
10 minBack:
Set:OK
[ Language ]
ˆThere is a choice of languages that can be displayed on the LCD monitor. 
Even if the battery is removed and inserted again, the language setting will be
preserved.
- LANGUAGE sub menu : English, Korean, French,
German, Spanish, Italian, S.Chinese, T.Chinese,
Japanese, Russian, Portuguese, Dutch, Danish,
Swedish, Finnish, Thai, BAHASA(MALAY /
INDONESIAN), Arabic, Czech, Polish, Hungarian
and Turkish.
SETUP
File 
Power Off
Language
Format
Date&TimeENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOLBack:
Set:OK
Downloaded From camera-usermanual.com Samsung Manuals 
						

							
]57
^
[ Formatting a memory ]
ˆThis is used for formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.

ƒSub menus
[No] : The memory will not be formatted. Press the
menu button three times and the menu display
will disappear.
[Yes] : A [Processing!] message appears and the
memory will be formatted. If you run FORMAT
in Play mode, a [No Image!] message will
appear.
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a file this camera cant recognise or one that has been
taken from another camera.
- Always format the memory card using this camera. If you insert a memory card
that has been formatted using other cameras, memory card readers, or PCs,
you will get a [Card Error!] message.
Setup menu
SETUP
File 
Power Off
Language
Format
Date&TimeNo
YesBack:
Set:OK
[ Setting up the Date / Time / Date type ]
ˆYou can change the date and time that will be displayed on the captured images
and set up the date type.

ƒSetting Date / Time & Selecting Date Format
RIGHT button : Selects the year/ month/ day/ hour/
minute date type.
LEFT button : Moves the cursor to the
[Date&Time] main menu if the
cursor is at the first item of the date
and time setup. In all other cases,
the cursor will be shifted to the left of its current position.
UP and DOWN buttons : Changes the setting value
- Date type : [yy/mm/dd], [dd/mm/yy], [mm/dd/yy], [Off][ Imprinting the recording date ]
ˆThere is an option to include DATE / TIME on still images.

ƒSub menus
[Off] : The DATE & TIME will not be
imprinted on the image file.
[Date] : Only the DATE will be imprinted on
the image file.
[Date&Time] : The DATE & TIME will be imprinted
on the image file.
SETUP
Power Off
Language
Format
Date&Time
ImprintOff
Date
Date&TimeBack:
Set:OK
SETUP
File 
Power Off
Language
Format
Date&TimeBack:
Set:OK
2006/01/01 13:00
yy/mm/dd
Downloaded From camera-usermanual.com Samsung Manuals 
						

							
]58
^
Setup menu
[ Sound ]
ˆIf you set sound to ON, various sounds will be activated for camera startup,
when buttons are pressed, so that you can be aware of the camera operation
status.

ƒ[Sound] sub menu : Off / Low / Medium / High[ Connecting an External Device (USB) ]
ˆYou can select an external device to which you want to connect the camera
using the USB cable.

ƒSub menus
- [Computer] : Select this if you want to connect the
camera to your PC.
Refer to page 69 for instructions on
how to connect the camera to your
PC.
- [Printer] : Select this if you want to connect the
camera to your printer.
Refer to page 51 for instructions on
how to connect the camera to your
printer.
SETUP
Language
Format
Date&Time
Imprint
SoundBack:
Set:OK
Off
Low
Medium
HighSETUP
Format
Date&Time
Imprint
Sound
USBBack:
Set:OK
Computer
Printer
[ Auto Focus lamp ]
ˆYou can turn on and off the Auto Focus lamp.

ƒSub menus
[Off] : The AF lamp will not light up in a low light
condition. 
[On] : The AF lamp will light up in a low light
condition. [ LCD brightness ]
ˆYou can adjust the LCD brightness.

ƒ[LCD] sub menu : Dark, Normal, Bright
SETUP
Date&Time
Imprint
Sound
USB 
AF LampBack:
Set:OK
Off
OnSETUP
Imprint
Sound
USB 
AF Lamp
LCDBack:
Set:OK
Dark
Normal
Bright
Downloaded From camera-usermanual.com Samsung Manuals 
						

							
]59
^
[ Selecting Video out type ]
ˆThe Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.)
to which the camera is connected. PAL mode can support only BDGHI.

ˆConnecting to an external monitor

ƒUsing the USB cable with Cradle (Optional) : 
Connect the camera and the cradle. Connect the
cradle to an external monitor with the supplied AV
cable.

ƒUsing the AV cable with Camera : Connect the
camera to an external monitor with the supplied AV
cable.
Yellow - Video
White - sound
Setup menu
SETUP
Sound
USB 
AF Lamp
LCD
Video OutBack:
Set:OK
NTSC
PAL
[Using the AV cable with Cradle][Using the AV cable with Camera]
-  NTSC  : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
-   PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K.,
Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain,
Sweden, Switzerland, Thailand, Norway.
-  When using a TV as an external monitor, you will need to select the external or
AV channel of the TV.
-  There will be a digital noise on the external monitor, but it is not a malfunction.
-  If the image is not in the centre of the screen, use the TV controls to centre it.
-  When the camera is connected to an external monitor, the menu will be visible
on the external monitor and the menu functions are the same as those
indicated on the LCD monitor.
-  When selecting the PAL video out type, the TV monitor turns off and the LCD
monitor of the camera turns on when you record a movie. After completing the
recording, the TV monitor turns on and the LCD monitor of the camera turns off.[ Quick view ]
ˆIf you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.

ƒSub menus
[Off] : The quick view function can’t be
activated.
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected time.
SETUP
USB 
AF Lamp
LCD
Video Out
Quick ViewBack:
Set:OK
Off
0.5 sec
1 sec
3 sec
Downloaded From camera-usermanual.com Samsung Manuals