Samsung Digimax S600 Users Manual
Have a look at the manual Samsung Digimax S600 Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
]30^ + / - button ƒUsing the Custom White Balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance.ˆExposure compensation : This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the + / - button. 3. Press the + / - button again. The value you set will be saved and the Exposure Compensation setup mode will close. If you change the exposure value, the exposure indicator ( ) will be displayed on the bottom of the LCD monitor. A negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures. 1. Select the CUSTOM ( ) menu of the White Balance. 2. Place a sheet of white paper in front of the camera so that the LCD monitor shows only white, and then press the SHUTTER button. 3. Your custom white balance value is stored. - The custom white balance value will be applied, starting with the next picture you take. - The user configured white balance will be remain effective until it is overwritten. [ White paper ] ƒCompensating Exposure 1. Press the + / - button, and then use the UP and DOWN buttons to select the exposure compensation icon ( ). The exposure compensation menu bar will appear as shown. 2. Use the LEFT and RIGHT buttons to set the desired exposure compensation factor. Measure:Shutter Downloaded From camera-usermanual.com Samsung Manuals
]31^ ˆYou can use the menu on the LCD monitor to set up recording functions. In any mode with the exception of VOICE RECORDING mode, pressing the MENU button displays the menu on the LCD monitor. The menu will not be displayed on the LCD monitor in the following circumstances: - When another button is being operated. - While image data is being processed. - When there is no battery capacity. ˆThe following functions are available, depending on the mode you have selected.The items indicated by are default settings.Menu tab Main menu Sub menu Camera working mode Page 2816X2112 2592x1944 2272X1704 2048X15361600X1200 1024X768640X480 -640X480 320X240160X120 -Super Fine FineNormal -30 FPS 15 FPSMulti SpotSingle Continuous AEB -Soft NormalVivid -Full Basic LCD Save - SIZE (Still image)p.32 p.32 p.32 p.32 p.33 p.33 p.34 p.34 SIZE (Movie clip) QUALITY FRAME RATEMETERING SHOOTINGSHARPNESS OSD INFORMATION How to use the menu Using the LCD monitor to set the camera settings 3. Use the UP and DOWN buttons to select a sub menu. 4. Select a sub menu, and then the value you set will be saved. Press the MENU button and the menu will disappear. 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. However, there is no menu for Voice Recording mode ( ). 2. Use the LEFT and RIGHT buttons to navigate through the menus. Press the UP or DOWN button.Press the UP or DOWN button. SIZE2816X2112 2592x1944 2272X1704 2048X1536 1600X1200 1024X768SIZE2816X2112 2592x1944 2272X1704 2048X1536 1600X1200 1024X768 SIZE2816X2112 2592x1944 2272X1704 2048X1536 1600X1200 1024X768 SIZE2816X2112 2592x1944 2272X1704 2048X1536 1600X1200 1024X768 QUALITY Super Fine Fine Normal METERING Multi Spot Press the LEFT or RIGHT button.Press the LEFT or RIGHT button. Ë. S600 only. Menus are subject to change without prior notice.Menu tab Main menu Sub menu Camera working mode Page Landscape Close upSunset DawnBacklight Firework Beach&Snow - MODE p.16 Ë Downloaded From camera-usermanual.com Samsung Manuals
]32^ Size Quality / Frame rate [ STILL IMAGE mode ] QUALITY Super Fine Fine Normal [ MOVIE CLIP mode ] FRAME RATE 30FPS 15FPS ˆYou can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality.IconSub menu Super Fine Fine Normal 30FPS 15FPS File Format jpeg jpeg jpeg avi avi STILL IMAGE mode ModeMOVIE CLIP mode ƒThis file format complies with the DCF (Design rule for Camera File system). ƒJPEG (Joint Photographic Experts Group) : JPEG is the image compression standard developed by the Joint Photographic Experts Group. This type of compression is most commonly used for compressing photos and graphics because it can compress the files efficiently without damaging the data.INFORMATION ˆYou can select the image size appropriate for your application. Ë. S600 only.ƒThe higher the resolution, the lower the number of shots available because high resolution images require more memory.INFORMATION [ STILL IMAGE mode ] SIZE2816X2112 2592x1944 2272X1704 2048X1536 1600X1200 1024X768 [ MOVIE CLIP mode ] SIZE 640X480 320X240 160X120 Icon 2816X 2592X 2272X 2048X 1600X 1024X 640X 640X 320X 160X 2112 1944 1704 1536 1200 768 480 480 240 120 Still image mode Mode Movie clip mode Size Ë Downloaded From camera-usermanual.com Samsung Manuals
]33^ ˆIf you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. [Multi] : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area. This is suitable for general use. [Spot] : Only the rectangular area in the centre of the LCD monitor will be metered for light. This is suitable when the subject in the centre is exposed correctly, regardless of the back lighting. If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, It is better to use exposure compensation.ˆYou can select continuous shot, and AEB (Auto Exposure Bracketing). - [Single] : Take one picture only - [Continuous] : Images will be taken continuously until the shutter button is released. The shooting capacity depends on the memory. - [AEB] : Take three pictures in a series in different exposures: short exposure (-0.5EV), standard exposure (0.0EV) and over exposure (+0.5EV). Use the mode if it is hard to decide exposure of the object. High resolution and picture quality increases file saving time, which increases stand-by time. If the [Continuous] or [AEB] sub menu is selected, the flash will be off automatically. If less than 3 pictures are available in the memory, the AEB shooting is not available. It is best to use a tripod for the AEB shooting as the time to save each image file is longer and the blurring caused by camera shake may occur. [ PROGRAM mode ] METERING Multi Spor [ PROGRAM mode ] SHOOTING Single Continuous AEB Metering Continuous shot Downloaded From camera-usermanual.com Samsung Manuals
]34^ Sharpness OSD (On Screen Display) information ˆIdle mode : If you select the [LCD Save] and the camera isnt operated during the specified time(about 30 SEC.), the camera power will be idle (LCD monitor : OFF, Camera status lamp : Blinking) automatically. - To use the camera again, press any of the camera buttons except the power button. - If there is no operation during the specified time, the camera power will be turned off automatically to save battery life. Refer to page 54 for more information about the auto power off function. OSD INFORMATIONFull Basic LCD Save [ Full information mode ] [ Basic information mode ] ˆYou can adjust the sharpness of the picture you want to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. Sub menu Icon Description The edges of the image are softened. This effect is suitable for editing images on your PC. The edges of the image are sharp. This is suitable for printing. The edges of the image are emphasized. The edges will appear sharp, but noise may occur in the recorded image. Vivid NormalSoft [ PROGRAM mode ] SHARPNESS Soft Normal Vivid ˆIn any mode with the exception of VOICE RECORDING mode, you can check the recording status in the LCD monitor. Downloaded From camera-usermanual.com Samsung Manuals
]35^ Starting play mode ƒPlaying back a movie clip Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded movie clip and press the Play & Pause button ( ) to play back. - To pause a movie clip file while playing it back, press the play & pause button again. - Pressing the play & pause button again will cause the movie clip file restart. - To rewind the movie clip while it is playing, press the LEFT button. To fast forward the movie clip, press the RIGHT button. - To stop playback of the movie clip, press the play & pause button, and then press the LEFT or RIGHT button. ˆMovie clip capture function : capture still images from the movie clip. ƒHow to capture the movie clip Steps 1-3 are the same as those for playing back a movie clip. 4. Press the Play / Pause button while playing the movie clip. Then press the E button. 5. The paused movie clip is saved in a new file name. The captured movie clip file has same size as the original movie clip (640X480, 320X240, 160X120). [Paused] [Pressing the E button] ˆIf the memory card is inserted in the camera, all the camera functions apply only to the memory card. ˆIf the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. ˆIf you have turned on the camera by pressing the POWER button, you can press the PLAY MODE button once to switch to Play mode and press it again to switch to Recording mode. ˆYou can turn the power on with the play mode button. The camera is turned on in play mode. Press the play mode button again and the camera will be turned off. ˆYou can set up the PLAY mode function by using the camera buttons and LCD monitor. 3. Select an image that you want to play back by pressing the LEFT / RIGHT button. Press and hold the Left or Right button to fast forward the images played. 2. The last image stored on the memory is displayed on the LCD monitor. ƒPlaying back a still image 1. Select the PLAY mode by pressing the play mode button ( ).ƒManner mode : Pressing the play mode button for more than 3 seconds changes the buzzer and start-up sound setting to OFF, even though you may have set these to ON. ƒLightly press the shutter button in Play mode to switch to the currently set shooting mode.INFORMATION 00:00:35 100-0010 Play:/ Capture:E 00:00:12 100-0010 Play:/ Capture:E Downloaded From camera-usermanual.com Samsung Manuals
]36^ Starting play mode LCD monitor Indicator ƒPlaying back a recorded voice Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded voice file and press the Play & Pause button ( ) to play back a recorded voice file. - To pause a recorded voice file, while playing it back, press the play & pause button again. - To resume playback of the voice file, press the play & pause button. - To rewind the voice file while it is playing, press the LEFT button. To fast forward the voice file, press the RIGHT button. - To stop playback of the voice file, press the play & pause button, and then press the LEFT or RIGHT button.ˆThe LCD monitor displays shooting information about the displayed image. PLAY: ISO : 50 Av : F 2.8 Tv : 1/30 Flash : On 2816X2112 2006/01/01 No. Description Icon Page1 Play mode icon -2 Battery p.93 Voice Memo p.204 Protect p.445DPOF p.466 Recording date 2006/01/01 -7 Image size 2816X2112 ~ 256X192 p.328Flash On / Off p.219Shutter speed 8~1/1,500 p.1410 Aperture Value F2.8 ~ F12.4 p.1411 ISO 50 ~ 400 p.29 12 Folder name & File name 100-0007 p.53º¹»½¼ ÂÃÄÁÀ¾¿ Downloaded From camera-usermanual.com Samsung Manuals
]37^ [ Thumbnail display mode ] Using the camera buttons to set the camera Thumbnail( ) / Enlargement ( ) button ˆIn Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions.ƒImage enlargement 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Pressing the thumbnail button will zoom back to the original full sized image. - You can tell whether the image displayed is an enlarged view by checking the image enlargement indicator shown at the bottom left of the LCD monitor. (If the image is not an enlarged view, the indicator will not be displayed.) You can also check the area of enlargement. - Movie clips and WAV files can’t be enlarged. - If an image is enlarged, a loss of quality may occur. ƒYou can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. ƒThumbnail display 1. While an image is displayed full screen, press the thumbnail button. 2. The thumbnail display will highlight the image that had been showing at the time the thumbnail mode was selected. 3. Press the 5 function button to move to a desired image. 4. To view an image separately, press the enlargement button.Thumbnail ( ) / Enlargement ( ) button [ Normal display mode ] Highlighted image Pressing the enlargement button ( )Pressing the thumbnail button ( ) Downloaded From camera-usermanual.com Samsung Manuals
]38^ Thumbnail ( ) / Enlargement ( ) button ˆWhen the menu is displayed on the LCD monitor, pressing the UP button makes the menu cursor move up. ˆWhen the menu is not displayed on the LCD monitor, the UP button operates as the voice memo button. You can add your voice to a stored still image. ƒAdding a Voice Memo to a Still Image 1. Press the LEFT / RIGHT button to select an image that you wish to add sound to. 2. Press the voice memo button ( ) and the voice memo indicator will display. The camera is now ready to record a voice memo. 3. Press the shutter button to start recording and voice will be recorded to the still image for 10 seconds. While the voice is recording, the recording status window will be displayed as shown alongside. 4. The recording can be stopped by pressing the shutter button again.5. The ( ) icon will be displayed on the LCD monitor after voice memo recording has finished. - Voice memos can’t be recorded onto movie clip and voice recording files. - A distance of 40cm between you and the camera (microphone) is the best distance to record sound. - The voice memo will be saved in .wav format, but has the same file name as the still image to which it corresponds. - If you add a new voice memo to the still image that already has a voice memo, the existing voice memo will be erased. Voice ( ) memo / Up button Stop:Shutter ƒThe maximum enlargement rate in proportion to the image size. ƒTrimming : You can extract part of the image that you want and save it separately. 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Press the MENU button and a message will be displayed as shown alongside. 4. Select a desired sub menu by pressing the LEFT / RIGHT button and press the OK button. [Yes] : The trimmed image will save as a new file name, and display on the LCD monitor. [No] : The trimming menu will disappear. If there is little memory space to save the trimmed image, the image can’t be trimmed. To delete the enlarged image during the trimming function, press the delete button. Trimming? Yes No Confirm:OK Image size Ë6M 5M 4M 3M 2M 1M VGAX11.0 X10.1 X8.9 X8.0 X6.3 X4.0 X2.5 Maximum enlargement rateË. S600 only. Downloaded From camera-usermanual.com Samsung Manuals
]39^ ˆIn Play mode, the play & pause/ down button works as follows: - If the menu is displayed Press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu cursor. - If a still image with a voice memo, a voice file, or a movie clip is playing In Stop mode : Plays a still image with a voice memo, a voice file, or a movie clip. During playback : Temporarily stops playback. In Pause mode : Resumes playback[Voice recording is stopped] Play & Pause ( ) / Down button E (Effect) button ˆIt is possible to add special effects to your images by using this button. The changed image is saved in a new file name. [Voice recording is playing] [Voice recording is paused] PLAY: PLAY: PAUSE: FF REWSTOP:OK EXIT:OK Exit:E 1. Select a still image or movie clip and press the E button. 2. Select a desired sub menu and press the OK button. : Captured images will be stored in black and white. : Captured images will be stored in a sepia tone (a gradient of yellowish brown colours). : Captured images will be stored in a red tone. : Captured images will be stored in a green tone. : Captured images will be stored in a blue tone. : Save the image in negative mode. Downloaded From camera-usermanual.com Samsung Manuals