Samsung Digimax S600 Users Manual
Here you can view all the pages of manual Samsung Digimax S600 Users Manual. The Samsung manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 61
]60^ Important notes ˆExtremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture built up can also occur in the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed. ˆCaution on Using the Lens - If the lens is...
Page 62
]61^ Warning indicator Before contacting a service centre ˆThere are several warnings that may appear on the LCD displayCard Error! ®Memory card error Turn off the camera power and turn it on again Insert the memory card again Insert the memory card and format the memory card. (p.55)Card Locked! ®The memory card is locked SD memory card : Slide the write protect switch to the top of the memory cardMemory Full! ®There is insufficient memory capacity to take an image Insert a new memory card Delete...
Page 63
]62^ Before contacting a service centre Camera does not take images when pressing the Shutter button ®There is insufficient memory capacity Delete unnecessary image files ®The memory card has not been formatted Format the memory card (p.55) ®The memory card is exhausted Insert a new memory card ®The memory card is locked Refer to [Card Locked!] error message ®The camera’s power is off Turn the camera power on ®The battery is exhausted Insert fresh batteries. ®Battery is inserted incorrectly with...
Page 64
]63^ Before contacting a service centre Specifications No image on external monitor ®The external monitor has not been connected properly with the camera Check the connection cables ®There are incorrect files in the memory card Insert a memory card that has correct filesWhen using the PC’s explorer, the [Removable Disk] file does not show ®Cable connection is incorrect Check the connection ®The camera is off Turn the camera on ®The operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.2...
Page 65
]64^ Specifications ˆEffect : Normal, B&W, Sepia, Red, Blue, Green, Negative, RGB ˆWhite Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom ˆVoice Recording : Voice Recording (max.1 hour), Voice Memo in Still Image (max. 10 sec.) ˆDate Imprinting : Date, Date&Time, Off (user selectable) ˆShooting - Still Image:KModes : Auto, Program, Scene Scene : Night, Portrait, Children (in Mode Dial), Landscape, Close-up, Sunset, Dawn, Backlight, Fireworks, Beach & Snow...
Page 66
]65^ Software Notes About the software System Requirements Please ensure that you read the instruction manual carefully before use. ®The attached software is a camera driver and image editing software tool for Windows. ®Under no circumstances should all or part of either the software or the user manual be reproduced. ®Copyrights for software are licensed only for use with a camera. ®In the unlikely event of a manufacturing fault, we will repair or exchange your camera. We cannot, however, be held...
Page 67
]66^ Setting up the application software ˆTo use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. ˆYou can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://www.samsungcamera.co.kr : Korean 1. The auto run frame will display. Click the [Install] menu in the Auto run frame.2. Install the DirectX, Digimax Master by...
Page 68
]67^ Setting up the application software Starting PC mode 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognize the camera. If your OS is Windows XP, an image viewer program will open. If the download window of Digmax Master opens after starting Digimax Master, the camera driver was setup successfully. 3. After restarting the computer, connect the PC to the camera with the USB cable. ®If you connect the USB cable to a USB port on your PC and then...
Page 69
]68^ Starting PC mode ˆDownloading stored images You can download the still images stored on the camera to your PCs hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computers desktop display, select [My computer] and double click [Removable Disk DCIM 100SSCAM]. The image files will then be displayed. 3. Select an image and press the right mouse button. 4. A pop-up menu will open. Click the [Cut] or [Copy] menu. -...
Page 70
]69^ Removing the removable disk Starting PC mode ƒWe recommend that you should copy the images to the PC to view them. Opening images directly from the removable disk may be subject to unexpected disconnection. ƒWhen you upload a file that is not taken by this camera to the Removable Disk, the [File Error!] message will be displayed on the LCD monitor in the PLAY mode, and nothing is displayed in THUMBNAIL mode.CAUTION7. An image file is transferred from the camera to your PC. 6. Press the right...