Samsung Digimax S600 User Manual
Have a look at the manual Samsung Digimax S600 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
]60^ Important notes ˆExtremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture built up can also occur in the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed. ˆCaution on Using the Lens - If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of the image sensor. - Pay attention not to get fingerprints or foreign substances on the surface of the lens. - When the lens cover opens, the outer lens that you can see is for auto focus. When using or cleaning this camera, handle the outer lens with care. ˆIf the digital camera is not used for a long period, an electric discharge can occur. It is a good idea to remove the battery and the memory card if you do not intend using the camera for an extended period of time. ˆIf the camera is exposed to an electronic interference, it will turn itself off to protect the memory card.ˆCamera Maintenance - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used. Clean the camera body with a soft cloth. Do not allow this camera to come into contact with solvent materials such as benzol, insecticide, thinners etc. This may damage the body shell of the camera and also affect its performance. Rough handling can damage the LCD monitor. Take care to avoid damage and keep the camera in its protective carry case at all times when not in use. ˆDo not attempt to disassemble or modify the camera. ˆUnder certain conditions, static electricity can cause the flash unit to fire. This is not harmful to the camera and is not a malfunction. ˆWhen images are uploaded or downloaded (when the charger and USB cable are inserted into the cradle(optional) at the same time), the data transfer may be affected by static electricity. In this case, disconnect and re-connect the USB cable before trying the transfer again. ˆBefore an important event or going on a trip, you should check the camera condition. - Take a picture for testing the camera condition and prepare extra battery. - Samsung cannot be held responsible for camera malfunctions. Downloaded From camera-usermanual.com Samsung Manuals
]61^ Warning indicator Before contacting a service centre ˆThere are several warnings that may appear on the LCD displayCard Error! ®Memory card error Turn off the camera power and turn it on again Insert the memory card again Insert the memory card and format the memory card. (p.55)Card Locked! ®The memory card is locked SD memory card : Slide the write protect switch to the top of the memory cardMemory Full! ®There is insufficient memory capacity to take an image Insert a new memory card Delete unnecessary image files to free up some memoryNo Image! ®There are no images stored on the memory Take images Insert a memory card that is holding some imagesFile Error! ®File error Format the memory card ®Memory card error Contact a camera service centre Low Battery! ®There is low battery capacity Insert fresh batteries.Low Light! ®When taking pictures in dark places Take pictures in Flash Photography mode.Out Of Number ®When selecting too many printing pages in the PictBridge menu. Select printing page within the limitation. The camera doesn’t switch on ®There is low battery capacity Insert fresh batteries. (p.9) ®The battery may be inserted incorrectly. Insert the battery according to the polarity marks (+, -) ®The battery is not inserted Insert the battery and turn on the camera ˆPlease check the following Downloaded From camera-usermanual.com Samsung Manuals
]62^ Before contacting a service centre Camera does not take images when pressing the Shutter button ®There is insufficient memory capacity Delete unnecessary image files ®The memory card has not been formatted Format the memory card (p.55) ®The memory card is exhausted Insert a new memory card ®The memory card is locked Refer to [Card Locked!] error message ®The camera’s power is off Turn the camera power on ®The battery is exhausted Insert fresh batteries. ®Battery is inserted incorrectly with the polarities reversed Insert the battery according to the polarity marks (+, -)The camera suddenly stops working while in use ®The camera stopped due to a malfunction Remove /re-insert battery and switch the camera onThe images are unclear ®A picture was taken without setting an appropriate macro mode Select an appropriate macro mode to take a clear image. ®The picture was taken with the subject beyond the flash range Take a picture within the flash range ®The lens is smudged or dirty Clean the lens The flash does not fire ®Flash off mode has been selected Dis-engage flash off mode ®The camera mode can’t use the flash Refer to the FLASH instruction (p.21)Incorrect date and time is displayed ®The date and time have been set incorrectly or the camera has adopted the default settings Reset the date and time correctlyThe camera buttons do not operate ®Camera malfunction Remove /re-insert battery and switch the camera onA card error has occurred while the memory card is in the camera. ®Incorrect memory card format Re-format the memory card The images dont play back ®Incorrect file name (Violation of DCF format) Do not change the image file nameColour of image is different to the original scene ®White balance or effect setting is incorrect Select appropriate White balance and effectImages are too bright ®Exposure is excessive Reset exposure compensation Downloaded From camera-usermanual.com Samsung Manuals
]63^ Before contacting a service centre Specifications No image on external monitor ®The external monitor has not been connected properly with the camera Check the connection cables ®There are incorrect files in the memory card Insert a memory card that has correct filesWhen using the PC’s explorer, the [Removable Disk] file does not show ®Cable connection is incorrect Check the connection ®The camera is off Turn the camera on ®The operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.2 ~ 10.3. Alternatively the PC does not support USB. Install Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.2 ~ 10.3 to PC that supports USB. ®The camera driver is not installed Install a [USB Storage Driver]ˆImage Sensor - Type : 1/2.5 CCD ˆLens - Focal Length : SHD Lens f = 5.8 ~ 17.4mm (35mm film equivalent : 35 ~ 105mm)- F No. : F2.8 ~ F7.1 (Wide), F4.9 ~ F12.4 (Tele) - Digital Zoom :KStill Image mode : 1.0X ~ 5.0X KPlay mode : S600 : 1.0X ~ 10.1X S600 : 1.0X ~ 11.0X (depends on image size) ˆLCD Monitor : 2.4 color TFT LCD (112,000 dots) ˆFocusing - Type : TTL auto focus - Range : KNormal : 80cm ~ infinity KMacro : 5cm ~ 80cm (Wide), 40cm ~ 80cm (Tele) KAuto Macro : 5cm ~ Infinity (Wide), 40cm ~ Infinity (Tele) ˆShutter - Type : Mechanical and Electronic shutter - Speed : 1 ~ 1/1,500 sec. (Manual : 8 ~ 1/1,500 sec.) ˆExposure - Control : KProgram AE KMetering : Multi, Spot - Compensation : ±2EV (0.5EV steps) - ISO Equivalent : Auto, 50,100, 200, 400 ˆFlash - Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off - Range : Wide : 0.2m ~ 3.0m, Tele : 0.4m ~ 2.5m (ISO AUTO) - Recharging Time : Approx. 6 sec. ˆSharpness : Soft, Normal, Vivid S500 S600 Effective Pixel Approx. 5.1 Mega-pixel Approx. 6.0 Mega-pixel Total Pixel Approx. 5.3 Mega-pixel Approx. 6.1 Mega-pixel Downloaded From camera-usermanual.com Samsung Manuals
]64^ Specifications ˆEffect : Normal, B&W, Sepia, Red, Blue, Green, Negative, RGB ˆWhite Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom ˆVoice Recording : Voice Recording (max.1 hour), Voice Memo in Still Image (max. 10 sec.) ˆDate Imprinting : Date, Date&Time, Off (user selectable) ˆShooting - Still Image:KModes : Auto, Program, Scene Scene : Night, Portrait, Children (in Mode Dial), Landscape, Close-up, Sunset, Dawn, Backlight, Fireworks, Beach & Snow Mode Dial : Auto, Program, Manual, Movie, Scene, Portrait, Night, Children KShooting : Single, Continuous, AEB KSelf-timer : 10 sec., 2 sec., Double (10 sec., 2 sec.) - Movie Clip :KWith Audio or without Audio (user selectable, recording time : memory capacity dependent) KSize : 640x480, 320x240, 160x120 (3X Optical Zoom, Mute during Zoom Operation) KFrame rate : 30 fps, 15 fps KMovie Editing (Embedded): Pause during recording, Still Image Capture ˆStorage - Media :KInternal memory : Approx.20MB flash memory KExternal memory : MMC / SD card (Up to 1GB Guaranteed) - File Format :KStill Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0 KMovie Clip : AVI (MJPEG) KAudio : WAV - Image Size- Capacity (20 MB) * These figures are measured under SamsungVs standard conditions and may vary depending on shooting conditions and camera settings ˆImage Play - Type : Single image, Thumbnails, Slide show, Movie Clip - Editing : Trimming, Resizing, Rotate, Effect ˆInterface - Digital output connector : USB 2.0 Full Speed - Audio : Mono - Video output : NTSC, PAL (user selectable) - Cradle Interface (Optional) ˆPower Source - Primary Battery : 2 x AA Alkaline (High Capacity) - Rechargeable battery (Optional) : SNB-2512 (Ni-MH) SBP-2524 (Ni-MH) Included battery may vary depending on sales region. ˆDimensions (WxHxD) : 96.8 X 61.8 X 26.4mm (excluding the projecting parts of the camera) ˆWeight : Approx. 136g (without batteries and card) ˆOperating Temperature : 0 ~ 40mC ˆOperating Humidity : 5 ~ 85% ˆSoftware - Camera Driver : Storage Driver (Windows98/98SE/2000/ME/XP, Mac OS 9.2 ~ 10.3)- Application : Digimax Master ˆSpecial Features : User-friendly WEffect” button, Easy Grip, 2.4” Large LCD, Convenient Mode Dial Ë.S600 only. Specifications are subject to change without prior notice. All trademarks are the property of their respective owners. Ë6M 5M 4M 3M 2M 1M VGA671012 19 44 9612 14 18 22 34 69 114 17 21 24 32 43 83 125 Super Fine Fine Normal Ë6M 5M 4M 3M 2M 1M VGA S600 2816X2112 2592x1944 2272x1704 2048x1536 1600x1200 1024x768 640x480 S500 - 2560x1920 2272x1704 2048x1536 1600x1200 1024x768 640x480 Downloaded From camera-usermanual.com Samsung Manuals
]65^ Software Notes About the software System Requirements Please ensure that you read the instruction manual carefully before use. ®The attached software is a camera driver and image editing software tool for Windows. ®Under no circumstances should all or part of either the software or the user manual be reproduced. ®Copyrights for software are licensed only for use with a camera. ®In the unlikely event of a manufacturing fault, we will repair or exchange your camera. We cannot, however, be held responsible in any way for damage caused by inappropriate use. ®Using a Hand-made PC or a PC and OS that has not been guaranteed by the manufacturer is not covered by the Samsung warranty. ®Before reading this manual, you should have a basic knowledge of computers and O/S (Operating Systems).After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver. This manual is based on model Digimax S600. ƒBe sure to check the system requirements before installing the driver. ƒYou should allow 5 ~ 10 seconds for running the automatic setup program according to the capability of your computer. If the frame does not show, run the [Windows Explorer] and select [Samsung.exe] in the CD-ROM Drive root directory. ƒPDF documents of user manual are included in the Software CD-ROM supplied with this camera. Search the PDF files with Windows explorer. Before opening the PDF files, you must install the Adobe Reader included in the Software CD-ROM.INFORMATION For Windows For Macintosh Windows 98 / 98SE / 2000 / ME / XP Mac OS 9.2 ~ 10.3 5QVQU]U5*:)5 5QVQU]U5*:)5200MB of available hard disk space 110MB of available hard-disk space USB port USB portCD-ROM drive CD-ROM drivePC with processor better than Pentium II 450MHz(Pentium 700MHz recommended) 1024x768 pixels, 16bit color display compatible monitor (24bit color display recommended)Power Mac G3 or later ˆCamera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader. After installing the driver and connecting this camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My computer]. A USB Storage Driver is provided only for Windows. A USB Driver for MAC is not included with the Application CD. You can use the camera with Mac OS 9.2 ~ 10.3. ˆDigimax Master : This is the all-in-one multi media software solution. You can download, view, edit and save your digital images and movie clips with this software. This software is only compatible with Windows. Downloaded From camera-usermanual.com Samsung Manuals
]66^ Setting up the application software ˆTo use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. ˆYou can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://www.samsungcamera.co.kr : Korean 1. The auto run frame will display. Click the [Install] menu in the Auto run frame.2. Install the DirectX, Digimax Master by selecting a button shown on the monitor. Downloaded From camera-usermanual.com Samsung Manuals
]67^ Setting up the application software Starting PC mode 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognize the camera. If your OS is Windows XP, an image viewer program will open. If the download window of Digmax Master opens after starting Digimax Master, the camera driver was setup successfully. 3. After restarting the computer, connect the PC to the camera with the USB cable. ®If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to computer connection mode. ®In this mode, you can download stored images to your PC through the USB cable. ®The LCD monitor is always turned off in PC mode.ƒIf you have installed the camera driver, The [Found New Hardware Wizard] may not open. ƒOn a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and a window asking you to select a driver file may appear. In this case, specify USB Driver in the CD supplied. (for Windows 98 and 98 SE).INFORMATION SETUP Format Date&time Imprint Sound USBBack: Set:OK Computer Printer ˆConnecting the camera to a PC 1. In any mode with the exception of Voice Recording mode, press the Menu button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 3. Select the [USB] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Use the UP and DOWN buttons to select [Computer], and then press the OK button. 5. Press the menu button twice and the menu will disappear. 6. Connect the PC to the camera with the USB cable. Downloaded From camera-usermanual.com Samsung Manuals
]68^ Starting PC mode ˆDownloading stored images You can download the still images stored on the camera to your PCs hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computers desktop display, select [My computer] and double click [Removable Disk DCIM 100SSCAM]. The image files will then be displayed. 3. Select an image and press the right mouse button. 4. A pop-up menu will open. Click the [Cut] or [Copy] menu. - [Cut] : cuts a selected file. - [Copy] : copies files. 5. Click a folder where you want to paste the file. [Using the USB cable with Cradle (Optional) ][Using the USB cable with Camera]ˆConnecting the camera to a PC ˆDisconnecting the camera and PC : Refer to page 69 (Removing the removable disk). If you selected [Printer] in Step 4, when you connect the camera to your printer, the [Connecting Printer] message will display and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 2 and onward.ƒTo save battery power, it is recommended that you use the cradle (optional) when connecting the camera to a computer.INFORMATION Downloaded From camera-usermanual.com Samsung Manuals
]69^ Removing the removable disk Starting PC mode ƒWe recommend that you should copy the images to the PC to view them. Opening images directly from the removable disk may be subject to unexpected disconnection. ƒWhen you upload a file that is not taken by this camera to the Removable Disk, the [File Error!] message will be displayed on the LCD monitor in the PLAY mode, and nothing is displayed in THUMBNAIL mode.CAUTION7. An image file is transferred from the camera to your PC. 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. - By using [Digimax Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files. ˆWindows 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Unplug the USB cable. ˆWindows 2000/ME/XP (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 3. The [Unplug or Eject Hardware] window will open. Select the [USB Mass Storage Device] and click the [Stop] button. 4. The [Stop a Hardware device] window will open. Select the [USB Mass Storage Device] and click the [OK] button. 2. Double-click the [Unplug or Eject Hardware] icon on the task bar. 5. A [Safe to Remove Hardware] window will open. Click the [OK] button. [Double-click!] Downloaded From camera-usermanual.com Samsung Manuals