Samsung Digimax Pro815 User Manual

¡¶121¡·
¡áThe Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the
camera is connected. PAL mode can support only BDGHI.
¡ÜHow to set the video out type
1. Press the Menu button and select the [        ] menu tab.
2. Press the Right button and select the [Video Out] menu 
by pressing the Up/ Down button.
3. Press the Right button and select a desired LCD 
by pressing the Up/ Down button.
- [Video Out] sub...

¡¶122¡·
¡áIf you enable Quick View before capturing an image, you can view the image you just
captured on the LCD for the duration set in the [Quick View] setup. Quick view is possible
only with still images.
¡ÜHow to set the quick view
1. Press the Menu button and select the [        ] menu tab.
2. Press the Right button and select the [Quick View] menu
by pressing the Up/ Down button.
3. Press the Right button and select a desired sub menu by
pressing the Up/ Down button.
[Off] : The quick view...

¡¶123¡·
¡áWhen an image taking vertically plays back, the auto rotating sensor will rotate the image correctly.
¡áYou can view the reversed image correctly without rotating the image.
¡ÜHow to set the auto rotating sensor
1. Press the Menu button and select the [        ] menu tab.
2. Press the Right button and select the [Auto Rotating]
menu by pressing the Up/ Down button.
3. Press the Right button and select a desired sub menu
by pressing the Up/ Down button.
[On] : The image will be rotated...

¡¶124¡·
¡áYou can select an external device to which you want to connect the camera using the USB cable.
¡ÜHow to set the external device
1. Press the Menu button and select the [        ] menu tab.
2. Press the Right button and select the [USB] menu by
pressing the Up/ Down button.
3. Press the Right button and select a desired sub menu 
by pressing the Up/ Down button.
[Computer] : Select this if you want to connect the camera
to your PC.
Refer to page 144 for instructions on how to
connect the camera...

¡¶125¡·
¡áYou can set up a start up image, start up sound, shutter sound and sound effect. The items
indicated by                         are default settings.
* Menus are subject to change without prior notice.
Menu tab Main menu Sub menu Page
Off Logo
User Image -
Off Sound 1
Sound 2 Sound 3
Off Shutter 1
Shutter 2 Shutter 3
Off Effect 1
Effect 2 Effect 3
Start Image
Start Sound
Shutter Sound
Sound Effectp.126
p.126
p.127
p.127
Setting up the MYCAM menu
Downloaded From camera-usermanual.com Samsung...

¡¶126¡·
¡ÜHow to set the start up image
1. Press the Menu button and select the [        ] menu tab.
2. Press the Right button and select the [Start Image] menu
by pressing the Up/ Down button.
3. Press the Right button and select a desired sub menu 
by pressing the Up/ Down button.
4. Press the OK button to set the setting.
¡áYou can select the image that is first displayed on the LCD whenever the camera is turned on.
¡ÜUse a saved image for the start-up image with the [User Image] in the [Resize] menu...

¡¶127¡·
¡áYou can select the shutter sound.
¡ÜHow to select the shutter sound
1. Press the Menu button and select the [        ] menu tab.
2. Press the Right button and select the [Shutter Sound]
menu by pressing the Up/ Down button.
3. Press the Right button and select a desired sub menu 
by pressing the Up/ Down button.
4. Press the OK button to set the setting.
Start SoundShutter SoundSound Effect
Start Image
OffSound 1Sound 2
Sound 3
Shutter SoundSound EffectStart Image
Start Sound
Effect 3OffEffect...

¡¶128¡·
Be sure to observe the following precautions!
¡áThis unit contains precision electronic components. Do not use or store this unit in the
following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
¡á
Do not let the unit come into...

¡¶129¡·
¡áCaution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of
the image sensor.
- Pay attention not to get fingerprints or foreign substances on the surface of the lens.
¡áIf the digital camera is not used for a long period, an electric discharge can occur.
It is a good idea to remove the batteries and the memory card if you do not intend using the
camera for an extended period of time.
¡áIf the camera is exposed to an electronic...

¡¶130¡·
¡áThere are several warnings that may appear on the LCD display.
Card Error !
¤ýMemory card error
¡æTurn off the camera power and turn it on again
¡æInsert the memory card again
¡æInsert the memory card and format the memory card (p.116)
No Card !
¤ýA memory card is not inserted
¡æInsert a memory card
¤ýThe camera can’t recognise the memory card
¡æInsert the memory card again
¡æTurn off the camera power and turn it on again
Card Full !
¤ýThere is insufficient memory capacity to take an image...