Samsung Dcs 50si System Falcon Keyset User Guide

BUSY STATION CALLBACKWhen you call another station and receive a busy signal:
• Press the CBKkey or dial 44.
• When the busy station becomes free, your keyset will ring. 
• Lift the handset or press ANS/RLSto call the now idle station.
NOTES:
1. A callback will be canceled if not answered within 30 seconds. If you
have set a callback, your CBKkey will light.
2. If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the SPEAKERkey before dialing.BUSY STATION CAMP-ONWhen...

• If you do not answer this recall within a pre-programmed period of time,
it will go to the system operator.CONSULTATION HOLDWhen you are talking on an outside line and it is necessary to consult with
another extension:
• Press the TRANSFERkey; you will receive transfer dial tone. Your call is
placed on transfer hold. 
• Dial the extension number.
• Consult with the internal party. 
• Press TRANSFERto return to the outside party or hang up to transfer
the call.
NOTE: Repeatedly pressing the TRANSFERkey...

Finish the first call and hang up; the waiting call will ring.
• Lift the handset or press the ANS/RLSkey to answer.
NOTE: Intercom calls will not go on Automatic Hold.
CONFERENCE CALLSYou may conference up to five parties (you and four others) in any combina-
tion of outside lines and internal stations in any order.
• While engaged in a conversation, press the CONFkey and receive con-
ference tone.
• Make another call, either intercom or outside, press the CONFkey and
receive conference tone.
• Make...

FORWARD FOLLOW MEWhen you want all calls to your extension forwarded to the extension where
you are now:
• Dial 605plus your extension number.
• Receive confirmation tone and hang up.
If you want a specific extension’s calls forwarded to your phone (Remote Call
Forward):
• Dial 605plus the desired extension number.
• Receive confirmation tone and hang up.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the SPEAKERkey before you begin dialing.FORWARD TO AN...

23
DIALING FEATURES
SPEED DIALING You can dial a preprogrammed telephone number stored in the system-wide
speed dial list of numbers 500–999 or from your personal list of numbers
00–49:
• With the handset on-hook, press the MEMORYkey or dial 16.
• Dial the desired speed dial number.
• The telephone number is automatically dialed for you.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the SPEAKERkey before you begin dialing.PROGRAMMING PERSONAL SPEED
DIAL...

NOTES:
1. If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the SPEAKERkey before you begin dialing.
2. The saved telephone number is stored in memory until you save anoth-
er number.
3. Redial does not apply to intercom calls.CHAIN DIALINGYou may manually dial additional digits following a speed dial number or
chain as many speed dial numbers together as required:
• After the first speed number is dialed, press MEMORYagain and dial
another speed number ORmanually...

27
MEET ME PAGE• Lift the handset.
• Press the Meet Me Page (MMPG) key or dial 54.
• Dial the desired zone number.
• After the attention tone, instruct the paged person to dial 56.
• Press WAITor TRANSFER.
• Remain off-hook until the person dials 56from any phone.
• The paged person will be automatically connected with you.CALL PARK AND PAGEWhen you have an outside call for someone who is not at his/her desk, you
can park the call and page the requested party:
• While in conversation, press the...

29
CANCELING MESSAGESTo cancel a message indication that you left at another station, dial 42plus
the extension number of the station at which you left a message.
To cancel all message indications left at your keyset, dial 42plus your exten-
sion. Your MESSAGElight will go out.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the SPEAKERkey before you begin dialing.RETURNING MESSAGES• Press the MESSAGEkey or dial 43. The first station that left a message
will...

• Dial the extension number of the door phone.
• You will be connected to the door phone and you can listen or have a
conversation.
• If an electric door lock release is installed, dial 13to unlock the door.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the SPEAKERkey.EXECUTIVE/SECRETARY HOT LINEIf programmed, an executive and a secretary can have a hot line between
them. When the executive station is in the DND mode, all of its calls will ring
the...

If your keyset is associated with a DCS 32 Button Add-On Module, you can
receive Executive OHVA calls. Executive Off-Hook Voice Announce allows
you to engage in conversation on your keyset and simultaneously receive
and reply handsfree to an OHVA through your DCS 32 Button Add-On Mod-
ule (AOM). Use caution because the conversation through the AOM may
possibly be heard by the caller on the keyset. When you receive an execu-
tive OHVA through your AOM:
• Reply by speaking in the direction of the...