Samsung Dcs 50si Lcd24b, Lcd12b, Std24b, Basic 12b, 7b Keyset User Guide

DIAL BY DIRECTORYEach station or speed dial number can have an associated directory name. A
station or speed dial number can be selected by scrolling alphabetically through
a directory name list. This on-line “phone book” allows the user to look up and
dial any station or speed dial number in seconds.
 Press the DIR key (DIRECTORY).
 Select the directory you wish to use: PERS (personal speed dial numbers),
SYS (system speed dial numbers) or STN (station names).
 Dial the key on the keypad that...

COUNT12345
DIAL 0 Q Z . ) 0
DIAL 1 space ? , ! 1
DIAL 2 A B C @ 2
DIAL 3 D E F # 3
DIAL 4 G H I $ 4
DIAL 5 J K L % 5
DIAL 6 M N O ^ 6
DIAL 7 P R S & 7
DIAL 8 T U V✱8
DIAL 9 W X Y ( 9
DIAL ✱ :=[ ]✱
NOTE: When the character you want appears on the same dial pad key as the
previous character, press UP to move the cursor one space to the right.
To cancel an individual alarm and reminder message:
 Press TRSF and then dial 112.
 Dial alarm number 1, 2 or 3.
 Press the HOLD key.
 Press the TRSF key.PERSONAL...

The DCS 50si system can handle both types of Caller ID; in fact, in the case of
number only delivery, the system can be programmed to insert a name for a
specific telephone number (up to a maximum of 250 numbers).
However, even though you are paying to receive Caller ID information, there are
some circumstances that mean you will not receive this information. The three
most common reasons are listed below along with the display information that
the DCS 50si will provide.
PRIVATE The caller does not wish...

 Press the CID key and then press the SCROLL key.
 Press the STORE soft key.
 The system displays the speed dial bin in which the number was stored.
NOTE: Your telephone system must have LCR correctly programmed to redial
the saved number. If LCR is not being used on your system, you will not be
allowed to STORE CID numbers.INQUIRE CID PARK/HOLD INFOIf you are informed that an incoming call is on hold or has been parked for you,
you may view the Caller ID information before you retrieve the call. This...

44
ADD-ON MODULE
WITH KEYSETThe add-on module (AOM) is used when you need more programmable keys or
executive off-hook voice announce (OHVA). The extra programmable keys are
used exactly as are the ones on your keyset. Make them DSS/BLF keys, C.O.
line keys, One Touch Speed Dial buttons or any combination of these and other
feature keys. A maximum of two AOMs can be added to any keyset.
The UP and DOWN arrow keys are used to adjust the speaker level for execu-
tive off-hook voice announce. The MUTE key...

46
PERSONAL SPEED DIAL NUMBERS
CODE NAMETELEPHONE NUMBER
25 _________________________ _________________________
26 _________________________ _________________________
27 _________________________ _________________________
28 _________________________ _________________________
29 _________________________ _________________________
30 _________________________ _________________________
31 _________________________ _________________________
32 _________________________ _________________________
33...